guard-xcoder 0.1.0

data/LICENSE

@@ -0,0 +1,20 @@
+Copyright (c) 2012 Franklin Webber 
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

data/README.md

@@ -0,0 +1,59 @@
+# Guard-Shell
+
+This little addition (1 proper line of code!) to guard allows you to run shell
+commands when certain files are altered.
+
+
+## Install
+  
+Make sure you have [guard](http://github.com/guard/guard) installed.
+
+Install the gem with:
+
+    gem install guard-shell
+
+Add it to your Gemfile:
+
+    gem 'guard-shell'
+
+And then add a basic setup to your Guardfile:
+
+    guard init shell
+
+
+## Usage
+
+If you can do something in your shell, it is probably very easy to setup with guard-shell, here are a few examples.
+
+
+#### Creating Backups of Files On Change
+
+    guard 'shell' do
+      # create a copy of the file with '.backup' at the end
+      watch('(.*)') {|m| `cp #{m[0]} #{m[0]}.backup` }
+    end
+
+
+#### Showing git st
+
+    guard 'shell' do
+      watch('.*') { `git st` }
+    end
+
+
+#### Rebuilding a LaTeX File
+
+    guard 'shell' do
+      # builds latex file to pdf and hides output
+      watch('(.*).tex') do |m| 
+        `pdflatex -shell-escape #{m[0]} 1>/dev/null`
+        puts "built #{m[1]}.pdf"
+      end
+    end
+
+
+#### Saying the Name of the File You Changed
+
+    guard 'shell' do
+      watch('(.*)') {|m| `say #{m[0]}` }
+    end

data/lib/guard/xcoder.rb

@@ -0,0 +1,142 @@
+require 'guard'
+require 'guard/guard'
+require 'xcoder'
+
+module Guard
+  class Xcoder < Guard
+  
+    VERSION = '0.1.0'
+    
+    def default_builder_actions
+      [ :build ]
+    end
+    
+    def default_paths
+      [ '.' ]
+    end
+    
+    def initialize(watchers=[], options = {})
+      @options = {
+        :actions => default_builder_actions,
+        :paths => default_paths,
+      }.update(options)
+ 
+      @paths = @options[:paths]
+      file_watchers = file_watchers_for_project_watchers watchers
+      watchers.replace file_watchers
+      
+      super
+    end
+
+    def start
+      projects
+      UI.info "[Guard::Xcoder] is now monitoring #{projects.map {|p| p.name }.join(", ")}"
+    end
+
+    def run_all
+      
+      projects.each do |project|
+        project.targets.each do |target|
+          config = target.config('Debug')
+          UI.info(("*" * 80))
+          UI.info "Building #{project.name} - #{target.name} - #{config.name}"
+          UI.info(("*" * 80))
+          config.builder.build
+        end
+      end
+      
+    end
+   
+    # 
+    # @param [Array<String>] commands to execute
+    #
+    def run_on_change(commands)
+      
+      project_name, target_name, config_name = commands.first.split("//")
+      builder = Xcode.project(project_name).target(target_name).config(config_name).builder
+
+      UI.info "[Guard::Xcoder] Performing [ #{@options[:actions].join(", ")} ] for #{project_name} > #{target_name} > #{config_name}"
+
+      Array(@options[:actions]).each do |operation|
+        builder.send(operation)
+      end
+      
+    end
+
+    def projects
+      @project ||= begin
+        # TODO: projects found multiple times will be duplicated.
+        @paths.map {|path| Xcode.find_projects path }.flatten.compact
+      end
+    end
+    
+    #
+    # @param [Array<Watcher>] watchers the existing watchers defined within the Guardfile that specify the path the project, target,
+    #   and config.
+    # @return [Array<Watcher>] a new list of watchers for every file within the matching project > target. Each watcher when matched
+    #   will return a path to the project//target//config that needs to be built.
+    # 
+    def file_watchers_for_project_watchers(watchers)
+
+      watchers.map do |watcher|
+        watchers_for_source_files_in(watcher.pattern)
+      end.flatten.compact
+
+    end
+    
+    def watchers_for_source_files_in pattern
+      
+      targets_in_path(pattern).map do |target|
+        
+        # TODO: this is currently hard-coded to Debug configuration, though the user can specify Release
+        
+        build_action = lambda { "#{target.project.name}//#{target.name}//Debug" }
+        
+        project_root_dir = File.join(File.dirname(target.project.path), target.name)
+        
+        # Create a watcher for all source build files specified within the target
+        
+        new_guards = target.sources_build_phase.build_files.map do |file|
+          full_source_path = File.join(project_root_dir,file.path)
+          puts "Source Path: #{full_source_path}"
+          create_guard_for full_source_path, build_action
+        end
+        
+        # Create a watcher for the pch if one has been specified.
+        if target.config('Debug').prefix_header
+          prefix_header_path = File.join(File.dirname(target.project.path), target.config('Debug').prefix_header)
+          puts prefix_header_path
+          new_guards << create_guard_for(prefix_header_path, build_action)
+        end
+
+        new_guards
+        
+      end.flatten.compact
+      
+    end
+
+    def targets_in_path(pattern)
+
+      project_name, target_name, config_name = pattern.split("//")
+      projects.find_all {|project| project.name == project_name }.map do |project|
+        if target_name
+          project.targets.find_all {|target| target.name == target_name }
+        else
+          project.targets
+        end
+      end.flatten.compact
+
+    end
+
+    def create_guard_for full_source_path, command
+      relative_source_path = full_source_path.gsub("#{::Guard.listener.directory}/",'')
+
+      # Given a file that is meant for the sources build phase, it
+      # is likely that the file has an accompanying header file so
+      # we expand the pattern to include that.
+      
+      source_regex = Regexp.new( Regexp.escape(relative_source_path).to_s.gsub(/(?:m?m)$/,'(?:m?m|h)') )
+      ::Guard::Watcher.new(source_regex,command)
+    end
+  end
+end

data/lib/guard/xcoder/templates/Guardfile

@@ -0,0 +1,24 @@
+#
+#  guard-xcoder accepts the following parameters:
+# 
+#     actions => a list of actions that you want to take with the
+#       instance of the Builder object for the matching file. This
+#       is generally actions like :clean, :build, and :package
+# 
+#
+#  guard-xcoder defines watchers differently as individual files
+#    identified instead the path to the particular project target
+#    that you want built.
+guard 'xcoder', :actions => [ :clean, :build ] do
+  #
+  # builds when any source file within the 'ProjectName' project changes
+  # for any target
+  watch('ProjectName')
+  
+  #
+  # builds when any source file within the project 'Project2' target named
+  # 'FirstTarget' has changed.
+  #
+  watch('Project2//FirstTarget')
+
+end

metadata

@@ -0,0 +1,94 @@
+--- !ruby/object:Gem::Specification
+name: guard-xcoder
+version: !ruby/object:Gem::Version
+  version: 0.1.0
+  prerelease: 
+platform: ruby
+authors:
+- Franklin Webber
+autorequire: 
+bindir: bin
+cert_chain: []
+date: 2012-03-04 00:00:00.000000000Z
+dependencies:
+- !ruby/object:Gem::Dependency
+  name: guard
+  requirement: &70236298801440 !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: 0.10.0
+  type: :runtime
+  prerelease: false
+  version_requirements: *70236298801440
+- !ruby/object:Gem::Dependency
+  name: bundler
+  requirement: &70236298800540 !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ~>
+      - !ruby/object:Gem::Version
+        version: '1.0'
+  type: :development
+  prerelease: false
+  version_requirements: *70236298800540
+- !ruby/object:Gem::Dependency
+  name: rspec
+  requirement: &70236298799500 !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ~>
+      - !ruby/object:Gem::Version
+        version: '2.0'
+  type: :development
+  prerelease: false
+  version_requirements: *70236298799500
+- !ruby/object:Gem::Dependency
+  name: guard-rspec
+  requirement: &70236298798520 !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0'
+  type: :development
+  prerelease: false
+  version_requirements: *70236298798520
+description: Guard::Xcoder performs project operations when project files are modified.
+email:
+- franklin.webber@gmail.com
+executables: []
+extensions: []
+extra_rdoc_files: []
+files:
+- lib/guard/xcoder/templates/Guardfile
+- lib/guard/xcoder.rb
+- LICENSE
+- README.md
+homepage: http://github.com/burtlo/guard-xcoder
+licenses: []
+post_install_message: 
+rdoc_options: []
+require_paths:
+- lib
+required_ruby_version: !ruby/object:Gem::Requirement
+  none: false
+  requirements:
+  - - ! '>='
+    - !ruby/object:Gem::Version
+      version: '0'
+required_rubygems_version: !ruby/object:Gem::Requirement
+  none: false
+  requirements:
+  - - ! '>='
+    - !ruby/object:Gem::Version
+      version: 1.3.6
+requirements: []
+rubyforge_project: guard-xcoder
+rubygems_version: 1.8.15
+signing_key: 
+specification_version: 3
+summary: Guard gem for performing commands with Xcode projects
+test_files: []
+has_rdoc: