direct7 0.0.10 → 0.0.12

data/vendor/bundle/ruby/2.7.0/gems/bundler-2.4.21/lib/bundler/man/bundle-install.1.ronn

@@ -0,0 +1,382 @@
+bundle-install(1) -- Install the dependencies specified in your Gemfile
+=======================================================================
+
+## SYNOPSIS
+
+`bundle install` [--binstubs[=DIRECTORY]]
+                 [--clean]
+                 [--deployment]
+                 [--frozen]
+                 [--full-index]
+                 [--gemfile=GEMFILE]
+                 [--jobs=NUMBER]
+                 [--local]
+                 [--no-cache]
+                 [--no-prune]
+                 [--path PATH]
+                 [--quiet]
+                 [--redownload]
+                 [--retry=NUMBER]
+                 [--shebang]
+                 [--standalone[=GROUP[ GROUP...]]]
+                 [--system]
+                 [--trust-policy=POLICY]
+                 [--with=GROUP[ GROUP...]]
+                 [--without=GROUP[ GROUP...]]
+
+## DESCRIPTION
+
+Install the gems specified in your Gemfile(5). If this is the first
+time you run bundle install (and a `Gemfile.lock` does not exist),
+Bundler will fetch all remote sources, resolve dependencies and
+install all needed gems.
+
+If a `Gemfile.lock` does exist, and you have not updated your Gemfile(5),
+Bundler will fetch all remote sources, but use the dependencies
+specified in the `Gemfile.lock` instead of resolving dependencies.
+
+If a `Gemfile.lock` does exist, and you have updated your Gemfile(5),
+Bundler will use the dependencies in the `Gemfile.lock` for all gems
+that you did not update, but will re-resolve the dependencies of
+gems that you did update. You can find more information about this
+update process below under [CONSERVATIVE UPDATING][].
+
+## OPTIONS
+
+The `--clean`, `--deployment`, `--frozen`, `--no-prune`, `--path`, `--shebang`,
+`--system`, `--without` and `--with` options are deprecated because they only
+make sense if they are applied to every subsequent `bundle install` run
+automatically and that requires `bundler` to silently remember them. Since
+`bundler` will no longer remember CLI flags in future versions, `bundle config`
+(see bundle-config(1)) should be used to apply them permanently.
+
+* `--binstubs[=<directory>]`:
+  Binstubs are scripts that wrap around executables. Bundler creates a small Ruby
+  file (a binstub) that loads Bundler, runs the command, and puts it in `bin/`.
+  This lets you link the binstub inside of an application to the exact gem
+  version the application needs.
+
+  Creates a directory (defaults to `~/bin`) and places any executables from the
+  gem there. These executables run in Bundler's context. If used, you might add
+  this directory to your environment's `PATH` variable. For instance, if the
+  `rails` gem comes with a `rails` executable, this flag will create a
+  `bin/rails` executable that ensures that all referred dependencies will be
+  resolved using the bundled gems.
+
+* `--clean`:
+  On finishing the installation Bundler is going to remove any gems not present
+  in the current Gemfile(5). Don't worry, gems currently in use will not be
+  removed.
+
+  This option is deprecated in favor of the `clean` setting.
+
+* `--deployment`:
+  In [deployment mode][DEPLOYMENT MODE], Bundler will 'roll-out' the bundle for
+  production or CI use. Please check carefully if you want to have this option
+  enabled in your development environment.
+
+  This option is deprecated in favor of the `deployment` setting.
+
+* `--redownload`:
+  Force download every gem, even if the required versions are already available
+  locally.
+
+* `--frozen`:
+  Do not allow the Gemfile.lock to be updated after this install. Exits
+  non-zero if there are going to be changes to the Gemfile.lock.
+
+  This option is deprecated in favor of the `frozen` setting.
+
+* `--full-index`:
+  Bundler will not call Rubygems' API endpoint (default) but download and cache
+  a (currently big) index file of all gems. Performance can be improved for
+  large bundles that seldom change by enabling this option.
+
+* `--gemfile=<gemfile>`:
+  The location of the Gemfile(5) which Bundler should use. This defaults
+  to a Gemfile(5) in the current working directory. In general, Bundler
+  will assume that the location of the Gemfile(5) is also the project's
+  root and will try to find `Gemfile.lock` and `vendor/cache` relative
+  to this location.
+
+* `--jobs=[<number>]`, `-j[<number>]`:
+  The maximum number of parallel download and install jobs. The default is the
+  number of available processors.
+
+* `--local`:
+  Do not attempt to connect to `rubygems.org`. Instead, Bundler will use the
+  gems already present in Rubygems' cache or in `vendor/cache`. Note that if an
+  appropriate platform-specific gem exists on `rubygems.org` it will not be
+  found.
+
+* `--prefer-local`:
+  Force using locally installed gems, or gems already present in Rubygems' cache
+  or in `vendor/cache`, when resolving, even if newer versions are available
+  remotely. Only attempt to connect to `rubygems.org` for gems that are not
+  present locally.
+
+* `--no-cache`:
+  Do not update the cache in `vendor/cache` with the newly bundled gems. This
+  does not remove any gems in the cache but keeps the newly bundled gems from
+  being cached during the install.
+
+* `--no-prune`:
+  Don't remove stale gems from the cache when the installation finishes.
+
+  This option is deprecated in favor of the `no_prune` setting.
+
+* `--path=<path>`:
+  The location to install the specified gems to. This defaults to Rubygems'
+  setting. Bundler shares this location with Rubygems, `gem install ...` will
+  have gem installed there, too. Therefore, gems installed without a
+  `--path ...` setting will show up by calling `gem list`. Accordingly, gems
+  installed to other locations will not get listed.
+
+  This option is deprecated in favor of the `path` setting.
+
+* `--quiet`:
+  Do not print progress information to the standard output. Instead, Bundler
+  will exit using a status code (`$?`).
+
+* `--retry=[<number>]`:
+  Retry failed network or git requests for <number> times.
+
+* `--shebang=<ruby-executable>`:
+  Uses the specified ruby executable (usually `ruby`) to execute the scripts
+  created with `--binstubs`. In addition, if you use `--binstubs` together with
+  `--shebang jruby` these executables will be changed to execute `jruby`
+  instead.
+
+  This option is deprecated in favor of the `shebang` setting.
+
+* `--standalone[=<list>]`:
+  Makes a bundle that can work without depending on Rubygems or Bundler at
+  runtime. A space separated list of groups to install has to be specified.
+  Bundler creates a directory named `bundle` and installs the bundle there. It
+  also generates a `bundle/bundler/setup.rb` file to replace Bundler's own setup
+  in the manner required. Using this option implicitly sets `path`, which is a
+  [remembered option][REMEMBERED OPTIONS].
+
+* `--system`:
+  Installs the gems specified in the bundle to the system's Rubygems location.
+  This overrides any previous configuration of `--path`.
+
+  This option is deprecated in favor of the `system` setting.
+
+* `--trust-policy=[<policy>]`:
+  Apply the Rubygems security policy <policy>, where policy is one of
+  `HighSecurity`, `MediumSecurity`, `LowSecurity`, `AlmostNoSecurity`, or
+  `NoSecurity`. For more details, please see the Rubygems signing documentation
+  linked below in [SEE ALSO][].
+
+* `--with=<list>`:
+  A space-separated list of groups referencing gems to install. If an
+  optional group is given it is installed. If a group is given that is
+  in the remembered list of groups given to --without, it is removed
+  from that list.
+
+  This option is deprecated in favor of the `with` setting.
+
+* `--without=<list>`:
+  A space-separated list of groups referencing gems to skip during installation.
+  If a group is given that is in the remembered list of groups given
+  to --with, it is removed from that list.
+
+  This option is deprecated in favor of the `without` setting.
+
+## DEPLOYMENT MODE
+
+Bundler's defaults are optimized for development. To switch to
+defaults optimized for deployment and for CI, use the `--deployment`
+flag. Do not activate deployment mode on development machines, as it
+will cause an error when the Gemfile(5) is modified.
+
+1. A `Gemfile.lock` is required.
+
+   To ensure that the same versions of the gems you developed with
+   and tested with are also used in deployments, a `Gemfile.lock`
+   is required.
+
+   This is mainly to ensure that you remember to check your
+   `Gemfile.lock` into version control.
+
+2. The `Gemfile.lock` must be up to date
+
+   In development, you can modify your Gemfile(5) and re-run
+   `bundle install` to [conservatively update][CONSERVATIVE UPDATING]
+   your `Gemfile.lock` snapshot.
+
+   In deployment, your `Gemfile.lock` should be up-to-date with
+   changes made in your Gemfile(5).
+
+3. Gems are installed to `vendor/bundle` not your default system location
+
+   In development, it's convenient to share the gems used in your
+   application with other applications and other scripts that run on
+   the system.
+
+   In deployment, isolation is a more important default. In addition,
+   the user deploying the application may not have permission to install
+   gems to the system, or the web server may not have permission to
+   read them.
+
+   As a result, `bundle install --deployment` installs gems to
+   the `vendor/bundle` directory in the application. This may be
+   overridden using the `--path` option.
+
+## INSTALLING GROUPS
+
+By default, `bundle install` will install all gems in all groups
+in your Gemfile(5), except those declared for a different platform.
+
+However, you can explicitly tell Bundler to skip installing
+certain groups with the `--without` option. This option takes
+a space-separated list of groups.
+
+While the `--without` option will skip _installing_ the gems in the
+specified groups, it will still _download_ those gems and use them to
+resolve the dependencies of every gem in your Gemfile(5).
+
+This is so that installing a different set of groups on another
+ machine (such as a production server) will not change the
+gems and versions that you have already developed and tested against.
+
+`Bundler offers a rock-solid guarantee that the third-party
+code you are running in development and testing is also the
+third-party code you are running in production. You can choose
+to exclude some of that code in different environments, but you
+will never be caught flat-footed by different versions of
+third-party code being used in different environments.`
+
+For a simple illustration, consider the following Gemfile(5):
+
+    source 'https://rubygems.org'
+
+    gem 'sinatra'
+
+    group :production do
+      gem 'rack-perftools-profiler'
+    end
+
+In this case, `sinatra` depends on any version of Rack (`>= 1.0`), while
+`rack-perftools-profiler` depends on 1.x (`~> 1.0`).
+
+When you run `bundle install --without production` in development, we
+look at the dependencies of `rack-perftools-profiler` as well. That way,
+you do not spend all your time developing against Rack 2.0, using new
+APIs unavailable in Rack 1.x, only to have Bundler switch to Rack 1.2
+when the `production` group _is_ used.
+
+This should not cause any problems in practice, because we do not
+attempt to `install` the gems in the excluded groups, and only evaluate
+as part of the dependency resolution process.
+
+This also means that you cannot include different versions of the same
+gem in different groups, because doing so would result in different
+sets of dependencies used in development and production. Because of
+the vagaries of the dependency resolution process, this usually
+affects more than the gems you list in your Gemfile(5), and can
+(surprisingly) radically change the gems you are using.
+
+## THE GEMFILE.LOCK
+
+When you run `bundle install`, Bundler will persist the full names
+and versions of all gems that you used (including dependencies of
+the gems specified in the Gemfile(5)) into a file called `Gemfile.lock`.
+
+Bundler uses this file in all subsequent calls to `bundle install`,
+which guarantees that you always use the same exact code, even
+as your application moves across machines.
+
+Because of the way dependency resolution works, even a
+seemingly small change (for instance, an update to a point-release
+of a dependency of a gem in your Gemfile(5)) can result in radically
+different gems being needed to satisfy all dependencies.
+
+As a result, you `SHOULD` check your `Gemfile.lock` into version
+control, in both applications and gems. If you do not, every machine that
+checks out your repository (including your production server) will resolve all
+dependencies again, which will result in different versions of
+third-party code being used if `any` of the gems in the Gemfile(5)
+or any of their dependencies have been updated.
+
+When Bundler first shipped, the `Gemfile.lock` was included in the `.gitignore`
+file included with generated gems.  Over time, however, it became clear that
+this practice forces the pain of broken dependencies onto new contributors,
+while leaving existing contributors potentially unaware of the problem. Since
+`bundle install` is usually the first step towards a contribution, the pain of
+broken dependencies would discourage new contributors from contributing. As a
+result, we have revised our guidance for gem authors to now recommend checking
+in the lock for gems.
+
+## CONSERVATIVE UPDATING
+
+When you make a change to the Gemfile(5) and then run `bundle install`,
+Bundler will update only the gems that you modified.
+
+In other words, if a gem that you `did not modify` worked before
+you called `bundle install`, it will continue to use the exact
+same versions of all dependencies as it used before the update.
+
+Let's take a look at an example. Here's your original Gemfile(5):
+
+    source 'https://rubygems.org'
+
+    gem 'actionpack', '2.3.8'
+    gem 'activemerchant'
+
+In this case, both `actionpack` and `activemerchant` depend on
+`activesupport`. The `actionpack` gem depends on `activesupport 2.3.8`
+and `rack ~> 1.1.0`, while the `activemerchant` gem depends on
+`activesupport >= 2.3.2`, `braintree >= 2.0.0`, and `builder >= 2.0.0`.
+
+When the dependencies are first resolved, Bundler will select
+`activesupport 2.3.8`, which satisfies the requirements of both
+gems in your Gemfile(5).
+
+Next, you modify your Gemfile(5) to:
+
+    source 'https://rubygems.org'
+
+    gem 'actionpack', '3.0.0.rc'
+    gem 'activemerchant'
+
+The `actionpack 3.0.0.rc` gem has a number of new dependencies,
+and updates the `activesupport` dependency to `= 3.0.0.rc` and
+the `rack` dependency to `~> 1.2.1`.
+
+When you run `bundle install`, Bundler notices that you changed
+the `actionpack` gem, but not the `activemerchant` gem. It
+evaluates the gems currently being used to satisfy its requirements:
+
+  * `activesupport 2.3.8`:
+    also used to satisfy a dependency in `activemerchant`,
+    which is not being updated
+  * `rack ~> 1.1.0`:
+    not currently being used to satisfy another dependency
+
+Because you did not explicitly ask to update `activemerchant`,
+you would not expect it to suddenly stop working after updating
+`actionpack`. However, satisfying the new `activesupport 3.0.0.rc`
+dependency of actionpack requires updating one of its dependencies.
+
+Even though `activemerchant` declares a very loose dependency
+that theoretically matches `activesupport 3.0.0.rc`, Bundler treats
+gems in your Gemfile(5) that have not changed as an atomic unit
+together with their dependencies. In this case, the `activemerchant`
+dependency is treated as `activemerchant 1.7.1 + activesupport 2.3.8`,
+so `bundle install` will report that it cannot update `actionpack`.
+
+To explicitly update `actionpack`, including its dependencies
+which other gems in the Gemfile(5) still depend on, run
+`bundle update actionpack` (see `bundle update(1)`).
+
+`Summary`: In general, after making a change to the Gemfile(5) , you
+should first try to run `bundle install`, which will guarantee that no
+other gem in the Gemfile(5) is impacted by the change. If that
+does not work, run [bundle update(1)](bundle-update.1.html).
+
+## SEE ALSO
+
+* [Gem install docs](http://guides.rubygems.org/rubygems-basics/#installing-gems)
+* [Rubygems signing docs](http://guides.rubygems.org/security/)

data/vendor/bundle/ruby/2.7.0/gems/bundler-2.4.21/lib/bundler/man/bundle-list.1

@@ -0,0 +1,50 @@
+.\" generated with Ronn/v0.7.3
+.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.
+.TH "BUNDLE\-LIST" "1" "October 2023" "" ""
+.
+.SH "NAME"
+\fBbundle\-list\fR \- List all the gems in the bundle
+.
+.SH "SYNOPSIS"
+\fBbundle list\fR [\-\-name\-only] [\-\-paths] [\-\-without\-group=GROUP[ GROUP\.\.\.]] [\-\-only\-group=GROUP[ GROUP\.\.\.]]
+.
+.SH "DESCRIPTION"
+Prints a list of all the gems in the bundle including their version\.
+.
+.P
+Example:
+.
+.P
+bundle list \-\-name\-only
+.
+.P
+bundle list \-\-paths
+.
+.P
+bundle list \-\-without\-group test
+.
+.P
+bundle list \-\-only\-group dev
+.
+.P
+bundle list \-\-only\-group dev test \-\-paths
+.
+.SH "OPTIONS"
+.
+.TP
+\fB\-\-name\-only\fR
+Print only the name of each gem\.
+.
+.TP
+\fB\-\-paths\fR
+Print the path to each gem in the bundle\.
+.
+.TP
+\fB\-\-without\-group=<list>\fR
+A space\-separated list of groups of gems to skip during printing\.
+.
+.TP
+\fB\-\-only\-group=<list>\fR
+A space\-separated list of groups of gems to print\.
+

data/vendor/bundle/ruby/2.7.0/gems/bundler-2.4.21/lib/bundler/man/bundle-list.1.ronn

@@ -0,0 +1,33 @@
+bundle-list(1) -- List all the gems in the bundle
+=========================================================================
+
+## SYNOPSIS
+
+`bundle list` [--name-only] [--paths] [--without-group=GROUP[ GROUP...]] [--only-group=GROUP[ GROUP...]]
+
+## DESCRIPTION
+
+Prints a list of all the gems in the bundle including their version.
+
+Example:
+
+bundle list --name-only
+
+bundle list --paths
+
+bundle list --without-group test
+
+bundle list --only-group dev
+
+bundle list --only-group dev test --paths
+
+## OPTIONS
+
+* `--name-only`:
+  Print only the name of each gem.
+* `--paths`:
+  Print the path to each gem in the bundle.
+* `--without-group=<list>`:
+  A space-separated list of groups of gems to skip during printing.
+* `--only-group=<list>`:
+  A space-separated list of groups of gems to print.

data/vendor/bundle/ruby/2.7.0/gems/bundler-2.4.21/lib/bundler/man/bundle-lock.1

@@ -0,0 +1,84 @@
+.\" generated with Ronn/v0.7.3
+.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.
+.TH "BUNDLE\-LOCK" "1" "October 2023" "" ""
+.
+.SH "NAME"
+\fBbundle\-lock\fR \- Creates / Updates a lockfile without installing
+.
+.SH "SYNOPSIS"
+\fBbundle lock\fR [\-\-update] [\-\-local] [\-\-print] [\-\-lockfile=PATH] [\-\-full\-index] [\-\-add\-platform] [\-\-remove\-platform] [\-\-patch] [\-\-minor] [\-\-major] [\-\-strict] [\-\-conservative]
+.
+.SH "DESCRIPTION"
+Lock the gems specified in Gemfile\.
+.
+.SH "OPTIONS"
+.
+.TP
+\fB\-\-update=<*gems>\fR
+Ignores the existing lockfile\. Resolve then updates lockfile\. Taking a list of gems or updating all gems if no list is given\.
+.
+.TP
+\fB\-\-local\fR
+Do not attempt to connect to \fBrubygems\.org\fR\. Instead, Bundler will use the gems already present in Rubygems\' cache or in \fBvendor/cache\fR\. Note that if a appropriate platform\-specific gem exists on \fBrubygems\.org\fR it will not be found\.
+.
+.TP
+\fB\-\-print\fR
+Prints the lockfile to STDOUT instead of writing to the file system\.
+.
+.TP
+\fB\-\-lockfile=<path>\fR
+The path where the lockfile should be written to\.
+.
+.TP
+\fB\-\-full\-index\fR
+Fall back to using the single\-file index of all gems\.
+.
+.TP
+\fB\-\-add\-platform\fR
+Add a new platform to the lockfile, re\-resolving for the addition of that platform\.
+.
+.TP
+\fB\-\-remove\-platform\fR
+Remove a platform from the lockfile\.
+.
+.TP
+\fB\-\-patch\fR
+If updating, prefer updating only to next patch version\.
+.
+.TP
+\fB\-\-minor\fR
+If updating, prefer updating only to next minor version\.
+.
+.TP
+\fB\-\-major\fR
+If updating, prefer updating to next major version (default)\.
+.
+.TP
+\fB\-\-strict\fR
+If updating, do not allow any gem to be updated past latest \-\-patch | \-\-minor | \-\-major\.
+.
+.TP
+\fB\-\-conservative\fR
+If updating, use bundle install conservative update behavior and do not allow shared dependencies to be updated\.
+.
+.SH "UPDATING ALL GEMS"
+If you run \fBbundle lock\fR with \fB\-\-update\fR option without list of gems, bundler will ignore any previously installed gems and resolve all dependencies again based on the latest versions of all gems available in the sources\.
+.
+.SH "UPDATING A LIST OF GEMS"
+Sometimes, you want to update a single gem in the Gemfile(5), and leave the rest of the gems that you specified locked to the versions in the \fBGemfile\.lock\fR\.
+.
+.P
+For instance, you only want to update \fBnokogiri\fR, run \fBbundle lock \-\-update nokogiri\fR\.
+.
+.P
+Bundler will update \fBnokogiri\fR and any of its dependencies, but leave the rest of the gems that you specified locked to the versions in the \fBGemfile\.lock\fR\.
+.
+.SH "SUPPORTING OTHER PLATFORMS"
+If you want your bundle to support platforms other than the one you\'re running locally, you can run \fBbundle lock \-\-add\-platform PLATFORM\fR to add PLATFORM to the lockfile, force bundler to re\-resolve and consider the new platform when picking gems, all without needing to have a machine that matches PLATFORM handy to install those platform\-specific gems on\.
+.
+.P
+For a full explanation of gem platforms, see \fBgem help platform\fR\.
+.
+.SH "PATCH LEVEL OPTIONS"
+See bundle update(1) \fIbundle\-update\.1\.html\fR for details\.

data/vendor/bundle/ruby/2.7.0/gems/bundler-2.4.21/lib/bundler/man/bundle-lock.1.ronn

@@ -0,0 +1,94 @@
+bundle-lock(1) -- Creates / Updates a lockfile without installing
+=================================================================
+
+## SYNOPSIS
+
+`bundle lock` [--update]
+              [--local]
+              [--print]
+              [--lockfile=PATH]
+              [--full-index]
+              [--add-platform]
+              [--remove-platform]
+              [--patch]
+              [--minor]
+              [--major]
+              [--strict]
+              [--conservative]
+
+## DESCRIPTION
+
+Lock the gems specified in Gemfile.
+
+## OPTIONS
+
+* `--update=<*gems>`:
+  Ignores the existing lockfile. Resolve then updates lockfile. Taking a list
+  of gems or updating all gems if no list is given.
+
+* `--local`:
+  Do not attempt to connect to `rubygems.org`. Instead, Bundler will use the
+  gems already present in Rubygems' cache or in `vendor/cache`. Note that if a
+  appropriate platform-specific gem exists on `rubygems.org` it will not be
+  found.
+
+* `--print`:
+  Prints the lockfile to STDOUT instead of writing to the file system.
+
+* `--lockfile=<path>`:
+  The path where the lockfile should be written to.
+
+* `--full-index`:
+  Fall back to using the single-file index of all gems.
+
+* `--add-platform`:
+  Add a new platform to the lockfile, re-resolving for the addition of that
+  platform.
+
+* `--remove-platform`:
+  Remove a platform from the lockfile.
+
+* `--patch`:
+  If updating, prefer updating only to next patch version.
+
+* `--minor`:
+  If updating, prefer updating only to next minor version.
+
+* `--major`:
+  If updating, prefer updating to next major version (default).
+
+* `--strict`:
+  If updating, do not allow any gem to be updated past latest --patch | --minor | --major.
+
+* `--conservative`:
+  If updating, use bundle install conservative update behavior and do not allow shared dependencies to be updated.
+
+## UPDATING ALL GEMS
+
+If you run `bundle lock` with `--update` option without list of gems, bundler will
+ignore any previously installed gems and resolve all dependencies again based
+on the latest versions of all gems available in the sources.
+
+## UPDATING A LIST OF GEMS
+
+Sometimes, you want to update a single gem in the Gemfile(5), and leave the rest of
+the gems that you specified locked to the versions in the `Gemfile.lock`.
+
+For instance, you only want to update `nokogiri`, run `bundle lock --update nokogiri`.
+
+Bundler will update `nokogiri` and any of its dependencies, but leave the rest of the
+gems that you specified locked to the versions in the `Gemfile.lock`.
+
+## SUPPORTING OTHER PLATFORMS
+
+If you want your bundle to support platforms other than the one you're running
+locally, you can run `bundle lock --add-platform PLATFORM` to add PLATFORM to
+the lockfile, force bundler to re-resolve and consider the new platform when
+picking gems, all without needing to have a machine that matches PLATFORM handy
+to install those platform-specific gems on.
+
+For a full explanation of gem platforms, see `gem help platform`.
+
+## PATCH LEVEL OPTIONS
+
+See [bundle update(1)](bundle-update.1.html) for details.

data/vendor/bundle/ruby/2.7.0/gems/bundler-2.4.21/lib/bundler/man/bundle-open.1

@@ -0,0 +1,52 @@
+.\" generated with Ronn/v0.7.3
+.\" http://github.com/rtomayko/ronn/tree/0.7.3
+.
+.TH "BUNDLE\-OPEN" "1" "October 2023" "" ""
+.
+.SH "NAME"
+\fBbundle\-open\fR \- Opens the source directory for a gem in your bundle
+.
+.SH "SYNOPSIS"
+\fBbundle open\fR [GEM] [\-\-path=PATH]
+.
+.SH "DESCRIPTION"
+Opens the source directory of the provided GEM in your editor\.
+.
+.P
+For this to work the \fBEDITOR\fR or \fBBUNDLER_EDITOR\fR environment variable has to be set\.
+.
+.P
+Example:
+.
+.IP "" 4
+.
+.nf
+
+bundle open \'rack\'
+.
+.fi
+.
+.IP "" 0
+.
+.P
+Will open the source directory for the \'rack\' gem in your bundle\.
+.
+.IP "" 4
+.
+.nf
+
+bundle open \'rack\' \-\-path \'README\.md\'
+.
+.fi
+.
+.IP "" 0
+.
+.P
+Will open the README\.md file of the \'rack\' gem source in your bundle\.
+.
+.SH "OPTIONS"
+.
+.TP
+\fB\-\-path\fR
+Specify GEM source relative path to open\.
+