denko 0.13.1 → 0.13.2

checksums.yaml

@@ -1,7 +1,7 @@
 ---
 SHA256:
-  metadata.gz: a8f92242ec380e61b3b9d8729c8268cd0384196a982b3546deea690449e1b969
-  data.tar.gz: f706c61a73d4ad2ea7ebc531454c79b1e45368f303b484189b8bf749d4845d52
+  metadata.gz: c1cefcc0106edf784dea04c7217bf8475887402da89aacf0c9b578185ee4c152
+  data.tar.gz: '08b1bcaac7973a3eb5b2fbbae7b7227cfbdec9250dffe9d41a95a1fe0a90565b'
 SHA512:
-  metadata.gz: f8d870fb998fe4694b6e18b3570f5caaaf965f4e54f8b6af609b6cdf27acae5be47482454b0c818bf3bd58e0d18d3548e8c18573bef3aef91054655c5120c411
-  data.tar.gz: 7d44fa1875dc2c023d4cbc664a5f8960bcaac9b3f32c44b41c366e9d9d8570f1d6d39850584be502c18e010c2d5d69aa2c786b85d504bb7bfda9064d0ba2c8a0
+  metadata.gz: a0344465f58fe0e23fb579d7e903a93ecaf49a923270991c471caf674a34bf5fece80e56598878a2e690966461d2f08db15b49eccd58c09de7d2140803f2f77e
+  data.tar.gz: 7395727636ea674940fd84a7fdf55b61a32dde2329cf2f561aea7e73ea177098e8346ea7fd2a5ea0b4d6f035a0b88d2e4386ba33a3356966b9afe4322a53912c

data/.github/workflows/build_avr.yml

@@ -33,9 +33,8 @@ jobs:
               - name: arduino:avr
             libraries: |
               - name: Servo
-              - name: LiquidCrystal
               - name: IRremote
-                version: 4.0.0
+                version: 4.1.2
               - name: Ethernet
               - name: WiFi
               - name: Adafruit NeoPixel
@@ -51,11 +50,10 @@ jobs:
         run: echo "path=$(./bin/denko sketch ${{ matrix.sketches.name }} --target ${{ matrix.board.denko-target }})" >> $GITHUB_OUTPUT
 
       - name: Compile Arduino Sketches
-        uses: arduino/compile-sketches@v1.0.1
+        uses: arduino/compile-sketches@v1.1.0
         with:
           platforms: ${{ matrix.board.platforms }}
           fqbn: ${{ matrix.board.fqbn }}
           libraries: ${{ matrix.board.libraries }}
           sketch-paths: |
             - ${{ steps.generate.outputs.path }}
-            

data/.github/workflows/build_esp32.yml

@@ -33,7 +33,7 @@ jobs:
                 source-url: https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json
             libraries: |
               - name: IRremoteESP8266
-                version: 2.8.4
+                version: 2.8.5
               - name: ESP32Servo
               - name: Adafruit NeoPixel
               
@@ -48,11 +48,10 @@ jobs:
         run: echo "path=$(./bin/denko sketch ${{ matrix.sketches.name }} --target ${{ matrix.board.denko-target }})" >> $GITHUB_OUTPUT
 
       - name: Compile Arduino Sketches
-        uses: arduino/compile-sketches@v1.0.1
+        uses: arduino/compile-sketches@v1.1.0
         with:
           platforms: ${{ matrix.board.platforms }}
           fqbn: ${{ matrix.board.fqbn }}
           libraries: ${{ matrix.board.libraries }}
           sketch-paths: |
             - ${{ steps.generate.outputs.path }}
-            

data/.github/workflows/build_esp8266.yml

@@ -33,7 +33,7 @@ jobs:
                 source-url: https://arduino.esp8266.com/stable/package_esp8266com_index.json
             libraries: |
               - name: IRremoteESP8266
-                version: 2.8.4
+                version: 2.8.5
               - name: Adafruit NeoPixel
 
     steps:
@@ -47,11 +47,10 @@ jobs:
         run: echo "path=$(./bin/denko sketch ${{ matrix.sketches.name }} --target ${{ matrix.board.denko-target }})" >> $GITHUB_OUTPUT
 
       - name: Compile Arduino Sketches
-        uses: arduino/compile-sketches@v1.0.1
+        uses: arduino/compile-sketches@v1.1.0
         with:
           platforms: ${{ matrix.board.platforms }}
           fqbn: ${{ matrix.board.fqbn }}
           libraries: ${{ matrix.board.libraries }}
           sketch-paths: |
             - ${{ steps.generate.outputs.path }}
-            

data/.github/workflows/build_megaavr.yml

@@ -33,9 +33,8 @@ jobs:
               - name: arduino:megaavr
             libraries: |
               - name: Servo
-              - name: LiquidCrystal
               - name: IRremote
-                version: 4.0.0
+                version: 4.1.2
               - name: Ethernet
               - name: WiFi
               - name: Adafruit NeoPixel
@@ -51,11 +50,10 @@ jobs:
         run: echo "path=$(./bin/denko sketch ${{ matrix.sketches.name }} --target ${{ matrix.board.denko-target }})" >> $GITHUB_OUTPUT
 
       - name: Compile Arduino Sketches
-        uses: arduino/compile-sketches@v1.0.1
+        uses: arduino/compile-sketches@v1.1.0
         with:
           platforms: ${{ matrix.board.platforms }}
           fqbn: ${{ matrix.board.fqbn }}
           libraries: ${{ matrix.board.libraries }}
           sketch-paths: |
             - ${{ steps.generate.outputs.path }}
-            

data/.github/workflows/build_ra4m1.yml

@@ -0,0 +1,57 @@
+name: Build / RA4M1
+
+on:
+  workflow_dispatch:
+  
+  pull_request:
+    paths:
+      - 'src/**'
+      - '.github/workflows/build_ra4m1.yml'
+
+  push:
+    paths:
+      - 'src/**'
+      - '.github/workflows/build_ra4m1.yml'
+      
+jobs:
+  samd-zero:
+    name: samd ${{ matrix.sketches.name }}
+    
+    runs-on: ubuntu-latest
+    
+    strategy:
+      matrix:
+        sketches:
+          - name: serial
+          - name: ethernet
+          - name: wifi
+            
+        board:
+          - fqbn: arduino:renesas_uno:minima
+            denko-target: ra4m1
+            platforms: |
+              - name: arduino:renesas_uno
+            libraries: |
+              - name: Servo
+              - name: Ethernet
+              - name: WiFi
+              - name: Adafruit NeoPixel
+                
+    steps:
+      - name: Checkout
+        uses: actions/checkout@v3
+        with:
+          submodules: true
+      
+      - name: Generate
+        id: generate
+        run: echo "path=$(./bin/denko sketch ${{ matrix.sketches.name }} --target ${{ matrix.board.denko-target }})" >> $GITHUB_OUTPUT
+
+      - name: Compile Arduino Sketches
+        uses: arduino/compile-sketches@v1.1.0
+        with:
+          platforms: ${{ matrix.board.platforms }}
+          fqbn: ${{ matrix.board.fqbn }}
+          libraries: ${{ matrix.board.libraries }}
+          sketch-paths: |
+            - ${{ steps.generate.outputs.path }}

data/.github/workflows/build_rp2040.yml

@@ -34,9 +34,8 @@ jobs:
                 source-url: https://github.com/earlephilhower/arduino-pico/releases/download/global/package_rp2040_index.json
             libraries: |
               - name: Servo
-              - name: LiquidCrystal
               - name: IRremote
-                version: 4.0.0
+                version: 4.1.2
               - name: Ethernet
               - name: WiFi
                 
@@ -51,11 +50,10 @@ jobs:
         run: echo "path=$(./bin/denko sketch ${{ matrix.sketches.name }} --target ${{ matrix.board.denko-target }})" >> $GITHUB_OUTPUT
 
       - name: Compile Arduino Sketches
-        uses: arduino/compile-sketches@v1.0.1
+        uses: arduino/compile-sketches@v1.1.0
         with:
           platforms: ${{ matrix.board.platforms }}
           fqbn: ${{ matrix.board.fqbn }}
           libraries: ${{ matrix.board.libraries }}
           sketch-paths: |
             - ${{ steps.generate.outputs.path }}
-            

data/.github/workflows/build_sam3x.yml

@@ -33,7 +33,6 @@ jobs:
               - name: arduino:sam
             libraries: |
               - name: Servo
-              - name: LiquidCrystal
               - name: Ethernet
               - name: WiFi
               - name: Adafruit NeoPixel
@@ -49,11 +48,10 @@ jobs:
         run: echo "path=$(./bin/denko sketch ${{ matrix.sketches.name }} --target ${{ matrix.board.denko-target }})" >> $GITHUB_OUTPUT
 
       - name: Compile Arduino Sketches
-        uses: arduino/compile-sketches@v1.0.1
+        uses: arduino/compile-sketches@v1.1.0
         with:
           platforms: ${{ matrix.board.platforms }}
           fqbn: ${{ matrix.board.fqbn }}
           libraries: ${{ matrix.board.libraries }}
           sketch-paths: |
             - ${{ steps.generate.outputs.path }}
-            

data/.github/workflows/build_samd.yml

@@ -33,9 +33,8 @@ jobs:
               - name: arduino:samd
             libraries: |
               - name: Servo
-              - name: LiquidCrystal
               - name: IRremote
-                version: 4.0.0
+                version: 4.1.2
               - name: Ethernet
               - name: WiFi
               - name: Adafruit NeoPixel
@@ -51,11 +50,10 @@ jobs:
         run: echo "path=$(./bin/denko sketch ${{ matrix.sketches.name }} --target ${{ matrix.board.denko-target }})" >> $GITHUB_OUTPUT
 
       - name: Compile Arduino Sketches
-        uses: arduino/compile-sketches@v1.0.1
+        uses: arduino/compile-sketches@v1.1.0
         with:
           platforms: ${{ matrix.board.platforms }}
           fqbn: ${{ matrix.board.fqbn }}
           libraries: ${{ matrix.board.libraries }}
           sketch-paths: |
             - ${{ steps.generate.outputs.path }}
-            

data/CHANGELOG.md

@@ -1,5 +1,65 @@
 # Changelog
 
+## 0.13.2
+
+### New Boards
+
+- Arduino UNO R4 Minima & Wi-Fi (`--target ra4m1`):
+  - Mostly working
+  - IR-remote and WS2812 libraries do not support this chip. Disabled temporarily.
+  - Hardware serial disabled until further testing.
+  - Wi-Fi still untested.
+
+### New Components
+
+- ADS1115 Analog-to-Digital Converter:
+  - Class: `Denko::AnalogIO::ADS1115`.
+  - Connects via I2C bus. Driver written in Ruby.
+  - Can be used directly by calling `ADS1115#read` with the 2 config register bytes.
+  - `#read` automatically waits for conversion before reading result.
+  - Implements `BoardProxy` interface, so `AnalogIO::Input` can use it in place of `Board`.
+  - For each `AnalogIO::Input` subcomponent:
+    - Negative pin (1 or 3) of differential pair can be set with the keyword argument `negative_pin:`
+    - Gain can be set with the keyword argument `gain:`
+    - Sample rate can be set with the keyword argument `sample_rate:`
+    - Sample rate doesn't affect update rate. Higher sample rates oversample for a single reading, increasing resolution.
+    - `ADS1115` sets `@volts_per_bit` in the subcomponent, so exact voltages can be calculated.
+    - There is no listening interface for subcomponents.
+  - Built in comparator not implemented.
+  - Basically an I2C version of ADS1118 with the temperature sensor swapped for comparator.
+
+### Optimizations
+
+- Boards now declare their serial RX buffer size and maximum I2C transaction size in handshake. This makes it possible to send data as fast as possible without data loss.
+- Added `benchmarks` folder and a simple SSD1306 screen redrawing benchmark, with results for many chips.
+- Changed many instance methods to use keyword args instead of options hash pattern. Better performance everywhere, but will matter most in mruby.
+- Many small performance improvemnts taken from mruby implementation to keep code as similar as possible across both.
+
+### Minor Changes
+
+- Improved detection of default serial interface and EEPROM availability at the sketch level.
+- Pins defined as any of `:SDA0, :SCL0, :MISO0, :MOSI0, :SCK0, :SS0` in a loaded board map are automatically copied to the key without the trailing 0, i.e. `:SDA` and so forth. This is convenient for chips like the RP2040 which don't define the "non-zero" pins at all.
+- Simplified handling of Wi-Fi reconnection in that sketch.
+- Wi-Fi sketch now prints its connection details to serial on each reconnect, as well as startup.
+- Updated both IR libraries to latest version.
+
+### Bug Fixes
+
+- Display::HD44780 was trying to write 1 and 0 as String instead of Integer to digital output pins.
+- Wi-Fi and Ethernet sketches could get stuck in an endless loop when switching between a TCP client and the Serial interface fallback.
+- SAMD21 could hang on I2C when writing lots of data. This has to do with its serial buffer not being saturated somehow? Fixed though.
+- Board#set_register_divider wouldn't raise the correct ArgumentError if the divider given was out of range.
+- Updated the arduino-yaml-board-maps project to prevent ESP32 chips from wrongly map many of their ADC pins.
+- ESP32 variants, other than the original V1, could try to assign more LEDC (PWM) channels than they actually have.
+
+### Removed
+
+- Removed the `:pad` option from Message::pack. Nothing was using it and padding bytes should be handled in the component class anyway.
+
+## 0.13.1
+
+Fixes critical 1-Wire bugs introduced when namespace was reorganized for 0.13.0.
+
 ## 0.13.0
 
 ### New Features

data/DEPS_CLI.md

@@ -14,13 +14,14 @@ arduino-cli core update-index
 arduino-cli core install arduino:megaavr
 arduino-cli core install arduino:sam
 arduino-cli core install arduino:samd
+arduino-cli core install arduino:renesas_uno
 arduino-cli core install esp8266:esp8266
 arduino-cli core install esp32:esp32
 arduino-cli core install rp2040:rp2040
 arduino-cli lib install Servo
 arduino-cli lib install Ethernet
 arduino-cli lib install WiFi
-arduino-cli lib install IRremote@4.0.0
+arduino-cli lib install IRremote@4.1.2
 arduino-cli lib install IRremoteESP8266@2.8.4
 arduino-cli lib install ESP32Servo
 arduino-cli lib install "Adafruit NeoPixel"
@@ -33,7 +34,7 @@ arduino-cli core install arduino:megaavr
 arduino-cli lib install Servo
 arduino-cli lib install Ethernet
 arduino-cli lib install WiFi
-arduino-cli lib install IRremote@4.0.0
+arduino-cli lib install IRremote@4.1.2
 arduino-cli lib install "Adafruit NeoPixel"
 ````
 
@@ -42,10 +43,11 @@ arduino-cli lib install "Adafruit NeoPixel"
 arduino-cli core update-index
 arduino-cli core install arduino:sam
 arduino-cli core install arduino:samd
+arduino-cli core install arduino:renesas_uno
 arduino-cli lib install Servo
 arduino-cli lib install Ethernet
 arduino-cli lib install WiFi
-arduino-cli lib install IRremote@4.0.0
+arduino-cli lib install IRremote@4.1.2
 arduino-cli lib install "Adafruit NeoPixel"
 ````
 
@@ -55,7 +57,7 @@ arduino-cli config init
 arduino-cli config add board_manager.additional_urls https://arduino.esp8266.com/stable/package_esp8266com_index.json
 arduino-cli core update-index
 arduino-cli core install esp8266:esp8266
-arduino-cli lib install IRremoteESP8266@2.8.4
+arduino-cli lib install IRremoteESP8266@2.8.5
 arduino-cli lib install "Adafruit NeoPixel"
 ````
 
@@ -66,7 +68,7 @@ arduino-cli config add board_manager.additional_urls https://raw.githubuserconte
 arduino-cli core update-index
 arduino-cli core install esp32:esp32
 arduino-cli lib install ESP32Servo
-arduino-cli lib install IRremoteESP8266@2.8.4
+arduino-cli lib install IRremoteESP8266@2.8.5
 arduino-cli lib install "Adafruit NeoPixel"
 ````
 
@@ -76,5 +78,5 @@ arduino-cli config init
 arduino-cli config add board_manager.additional_urls https://github.com/earlephilhower/arduino-pico/releases/download/global/package_rp2040_index.json
 arduino-cli core update-index
 arduino-cli core install rp2040:rp2040
-arduino-cli lib install IRremote@4.0.0
+arduino-cli lib install IRremote@4.1.2
 ````

data/DEPS_IDE.md

@@ -31,6 +31,7 @@ All platforms will require libraries to be installed. To install a library do th
     Arduino megaAVR Boards
     Arduino SAM Boards (32-bits ARM Cortex-M3)
     Arduino SAMD Boards (32-bits ARM Cortex-M0+)
+    Arduino UNO R4 Boards
     ESP8266 Boards
     ESP32 Boards    
     ````    
@@ -39,8 +40,8 @@ All platforms will require libraries to be installed. To install a library do th
     Servo                      by Michael Margolis, Arduino
     Ethernet                   by Various
     WiFi                       by Arduino
-    IRremote         @ v4.0.0  by shirriff, z3to, ArminJo
-    IRremoteESP82666 @ v2.8.4  by David Conran, Sebastien Warin
+    IRremote         @ v4.1.2  by shirriff, z3to, ArminJo
+    IRremoteESP82666 @ v2.8.5  by David Conran, Sebastien Warin
     ESP32Servo                 by Kevin Harrington, John K. Bennett
     Adafruit NeoPixel          by Adafruit
     ````
@@ -55,7 +56,7 @@ All platforms will require libraries to be installed. To install a library do th
     Servo                      by Michael Margolis, Arduino
     Ethernet                   by Various
     WiFi                       by Arduino
-    IRremote         @ v4.0.0  by shirriff, z3to, ArminJo
+    IRremote         @ v4.1.2  by shirriff, z3to, ArminJo
     Adafruit NeoPixel          by Adafruit
     ````
     
@@ -64,13 +65,14 @@ All platforms will require libraries to be installed. To install a library do th
     ````
     Arduino SAM Boards (32-bits ARM Cortex-M3)
     Arduino SAMD Boards (32-bits ARM Cortex-M0+)
+    Arduino UNO R4 Boards
     ````    
   * Libraries:
     ````
     Servo                      by Michael Margolis, Arduino
     Ethernet                   by Various
     WiFi                       by Arduino
-    IRremote         @ v4.0.0  by shirriff, z3to, ArminJo
+    IRremote         @ v4.1.2  by shirriff, z3to, ArminJo
     Adafruit NeoPixel          by Adafruit
     ````
 
@@ -85,7 +87,7 @@ All platforms will require libraries to be installed. To install a library do th
     ````    
   * Libraries:
     ````
-    IRremoteESP82666 @ v2.8.4  by David Conran, Sebastien Warin
+    IRremoteESP82666 @ v2.8.5  by David Conran, Sebastien Warin
     Adafruit NeoPixel          by Adafruit
     ````
 
@@ -100,7 +102,7 @@ All platforms will require libraries to be installed. To install a library do th
     ````    
   * Libraries (latest version unless specified):
     ````
-    IRremoteESP82666 @ v2.8.4  by David Conran, Sebastien Warin
+    IRremoteESP82666 @ v2.8.5  by David Conran, Sebastien Warin
     ESP32Servo                 by Kevin Harrington, John K. Bennett
     Adafruit NeoPixel          by Adafruit
     ````
@@ -116,5 +118,5 @@ All platforms will require libraries to be installed. To install a library do th
     ````    
   * Libraries:
     ````
-    IRremote         @ v4.0.0  by shirriff, z3to, ArminJo
+    IRremote         @ v4.1.2  by shirriff, z3to, ArminJo
     ````