concerto_cas_auth 0.0.2

checksums.yaml

@@ -0,0 +1,7 @@
+---
+SHA1:
+  metadata.gz: 75fa8f21e2468276688cd104f8a88852917684d9
+  data.tar.gz: 151d74f652969831a514adfc828eaaf339736137
+SHA512:
+  metadata.gz: d7ddd8fe56baf5aafe3153e4061c0e600c00f46e32d3841f7ea8da4e10696184041a3cb8329aa9cdceb99c3bd29cd234ab71fd2bed76a5cd9004868c51057aaf
+  data.tar.gz: 00eb452d66cd4f361753366bde75bff879a8a0534071525c21168983a75667f0e607617281793ae2f9c2fa48bda1dec1f0a4f5a7f7631e707e6c68ee71f31bec

data/LICENSE

@@ -0,0 +1,13 @@
+  Copyright 2014 Concerto Authors
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+  http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.

data/README.md

@@ -0,0 +1,2 @@
+ConcertoCasAuth
+===============

data/Rakefile

@@ -0,0 +1,34 @@
+begin
+  require 'bundler/setup'
+rescue LoadError
+  puts 'You must `gem install bundler` and `bundle install` to run rake tasks'
+end
+
+require 'rdoc/task'
+
+RDoc::Task.new(:rdoc) do |rdoc|
+  rdoc.rdoc_dir = 'rdoc'
+  rdoc.title    = 'ConcertoCasAuth'
+  rdoc.options << '--line-numbers'
+  rdoc.rdoc_files.include('README.rdoc')
+  rdoc.rdoc_files.include('lib/**/*.rb')
+end
+
+APP_RAKEFILE = File.expand_path("../test/dummy/Rakefile", __FILE__)
+load 'rails/tasks/engine.rake'
+
+
+
+Bundler::GemHelper.install_tasks
+
+require 'rake/testtask'
+
+Rake::TestTask.new(:test) do |t|
+  t.libs << 'lib'
+  t.libs << 'test'
+  t.pattern = 'test/**/*_test.rb'
+  t.verbose = false
+end
+
+
+task default: :test

data/app/assets/javascripts/concerto_cas_auth/application.js

@@ -0,0 +1,13 @@
+// This is a manifest file that'll be compiled into application.js, which will include all the files
+// listed below.
+//
+// Any JavaScript/Coffee file within this directory, lib/assets/javascripts, vendor/assets/javascripts,
+// or vendor/assets/javascripts of plugins, if any, can be referenced here using a relative path.
+//
+// It's not advisable to add code directly here, but if you do, it'll appear at the bottom of the
+// compiled file.
+//
+// Read Sprockets README (https://github.com/sstephenson/sprockets#sprockets-directives) for details
+// about supported directives.
+//
+//= require_tree .

data/app/assets/stylesheets/concerto_cas_auth/application.css

@@ -0,0 +1,15 @@
+/*
+ * This is a manifest file that'll be compiled into application.css, which will include all the files
+ * listed below.
+ *
+ * Any CSS and SCSS file within this directory, lib/assets/stylesheets, vendor/assets/stylesheets,
+ * or vendor/assets/stylesheets of plugins, if any, can be referenced here using a relative path.
+ *
+ * You're free to add application-wide styles to this file and they'll appear at the bottom of the
+ * compiled file so the styles you add here take precedence over styles defined in any styles
+ * defined in the other CSS/SCSS files in this directory. It is generally better to create a new
+ * file per style scope.
+ *
+ *= require_tree .
+ *= require_self
+ */

data/app/controllers/concerto_cas_auth/application_controller.rb

@@ -0,0 +1,53 @@
+module ConcertoCasAuth
+  class ApplicationController < ::ApplicationController
+
+    require 'concerto_identity'
+
+    def find_from_omniauth(cas_hash)
+      # Get any configuration options for customized CAS return value identifiers
+      omniauth_keys = ConcertoCasAuth::Engine.config.omniauth_keys
+
+      if identity = ConcertoIdentity::Identity.find_by_user_id(cas_hash[omniauth_keys["uid_key"]])
+        # Check if user already exists
+        return identity.user
+      else
+        # Add a new user via omniauth cas details
+        user = User.new
+
+        # Set user attributes
+        user.is_admin = false
+        user.first_name = cas_hash[omniauth_keys["first_name_key"]]
+        user.email = cas_hash[omniauth_keys["email_key"]]
+        user.password, user.password_confirmation = Devise.friendly_token.first(8)
+
+        if !User.exists?
+          # First user is an admin
+          first_user_setup = true
+          user.is_admin = true
+
+          # Error reporting
+          user.recieve_moderation_notifications = true
+          user.confirmed_at = Date.today
+
+          # Set concerto system config variables
+          if ConcertoConfig["setup_complete"] == false
+            ConcertoConfig.set("setup_complete", "true")
+            ConcertoConfig.set("send_errors", "true")
+          end
+
+          # Create Concerto Admin Group
+          group = Group.where(:name => "Concerto Admins").first_or_create
+          membership = Membership.create(:user_id => user.id, :group_id => group.id, :level => Membership::LEVELS[:leader])
+        end
+
+        if user.save
+          ConcertoIdentity::Identity.create(provider: "cas", external_id: cash_hash[omniauth_keys["uid_key"]], user_id: user.id)
+          return user
+        else
+          return nil
+        end
+      end
+    end
+
+  end
+end

data/app/controllers/concerto_cas_auth/omniauth_callback_controller.rb

@@ -0,0 +1,27 @@
+require_dependency "concerto_cas_auth/application_controller"
+
+module ConcertoCasAuth
+  class OmniauthCallbackController < ApplicationController
+
+    def cas_auth
+      cas_hash = request.env["omniauth.auth"]
+      user = find_from_omniauth(cas_hash)
+
+      if !user
+        flash.notice = "Failed to sign in with CAS"
+        redirect_to "/"
+      elsif user.persisted?
+        flash.notice = "Signed in through CAS"
+        session["devise.user_attributes"] = user.attributes
+        sign_in user
+        redirect_to "/"
+      else 
+        flash.notice = "Signed in through CAS"
+        session["devise.user_attributes"] = user.attributes
+        sign_in user
+        redirect_to "/"
+      end
+    end
+
+  end
+end

data/app/helpers/concerto_cas_auth/application_helper.rb

@@ -0,0 +1,4 @@
+module ConcertoCasAuth
+  module ApplicationHelper
+  end
+end

data/app/views/concerto_cas_auth/omniauth_cas/_signin.html.erb

@@ -0,0 +1 @@
+<%= link_to 'Log in', 'auth/cas/' %>

data/config/concerto_cas_auth.yml.sample

@@ -0,0 +1,39 @@
+# ============================================================
+# THIS FILE GOES IN THE CONCERTO APPLICATION CONFIG/ DIRECTORY
+# ============================================================
+
+# Configuration options for omniauth-cas 
+#  visit https://github.com/dlindahl/omniauth-cas 
+#  for more details in README
+
+# ----------------
+# Required options
+# ----------------
+# host: 
+# url: 
+
+# -----------------------------------------------
+# Configurable options for values returned by CAS
+# -----------------------------------------------
+# uid_key:
+# name_key:
+# email_key:
+# first_name_key:
+# last_name_key:
+# location_key:
+# image_key:
+# phone_key:
+
+# --------------------------
+# Other configurable options
+# --------------------------
+# port:
+# ssl:
+# service_validate_url:
+# logout_url:
+# login_url:
+# uid_field:
+# ca_path:
+# disable_ssl_verification:
+# on_single_sign_out:
+

data/config/initializers/omniauth.rb

@@ -0,0 +1,21 @@
+# Initializer for omniauth-cas gem
+
+# get yml config from main Concerto application in config directory
+raw_config = YAML.load_file("#{Rails.root.to_s}/config/concerto_cas_auth.yml")
+
+# read all available configuration options from yml file
+omniauth_config = {}
+raw_config.each do |key, value|
+  omniauth_config[key] = value
+end
+
+# configure omniauth-cas gem based on specified yml configs
+Rails.application.config.middleware.use OmniAuth::Builder do
+  provider :cas, omniauth_config
+end
+
+# save omniauth configuration for later use in application
+#  to reference any unique identifiers for extra CAS options
+ConcertoCasAuth::Engine.configure do
+   config.omniauth_keys = omniauth_config
+end

data/config/routes.rb

@@ -0,0 +1,7 @@
+Concerto::Application.routes.draw do
+  mount ConcertoCasAuth::Engine, :at => '/auth'
+end
+
+ConcertoCasAuth::Engine.routes.draw do
+  get ":provider/callback", :to => "omniauth_callback#cas_auth"
+end

data/lib/concerto_cas_auth.rb

@@ -0,0 +1,4 @@
+require "concerto_cas_auth/engine"
+
+module ConcertoCasAuth
+end

data/lib/concerto_cas_auth/engine.rb

@@ -0,0 +1,23 @@
+module ConcertoCasAuth
+
+  require 'omniauth'
+  require 'omniauth-cas'
+  require 'concerto_identity'
+
+  class Engine < ::Rails::Engine
+    isolate_namespace ConcertoCasAuth
+    engine_name 'concerto_cas_auth'
+
+    # Define plugin information for the Concerto application to read.
+    # Do not modify @plugin_info outside of this static configuration block.
+    def plugin_info(plugin_info_class)
+      @plugin_info ||= plugin_info_class.new do
+
+        add_route("concerto_cas_auth", ConcertoCasAuth::Engine)
+
+        add_view_hook "ApplicationController", :signin_hook, :partial => "concerto_cas_auth/omniauth_cas/signin"
+
+      end
+    end
+  end
+end

data/lib/concerto_cas_auth/version.rb

@@ -0,0 +1,3 @@
+module ConcertoCasAuth
+  VERSION = "0.0.2"
+end

data/lib/tasks/concerto_cas_auth_tasks.rake

@@ -0,0 +1,4 @@
+# desc "Explaining what the task does"
+# task :concerto_cas_auth do
+#   # Task goes here
+# end

data/test/concerto_cas_auth_test.rb

@@ -0,0 +1,7 @@
+require 'test_helper'
+
+class ConcertoCasAuthTest < ActiveSupport::TestCase
+  test "truth" do
+    assert_kind_of Module, ConcertoCasAuth
+  end
+end

data/test/dummy/README.rdoc

@@ -0,0 +1,28 @@
+== README
+
+This README would normally document whatever steps are necessary to get the
+application up and running.
+
+Things you may want to cover:
+
+* Ruby version
+
+* System dependencies
+
+* Configuration
+
+* Database creation
+
+* Database initialization
+
+* How to run the test suite
+
+* Services (job queues, cache servers, search engines, etc.)
+
+* Deployment instructions
+
+* ...
+
+
+Please feel free to use a different markup language if you do not plan to run
+<tt>rake doc:app</tt>.

data/test/dummy/Rakefile

@@ -0,0 +1,6 @@
+# Add your own tasks in files placed in lib/tasks ending in .rake,
+# for example lib/tasks/capistrano.rake, and they will automatically be available to Rake.
+
+require File.expand_path('../config/application', __FILE__)
+
+Rails.application.load_tasks

data/test/dummy/app/assets/javascripts/application.js

@@ -0,0 +1,13 @@
+// This is a manifest file that'll be compiled into application.js, which will include all the files
+// listed below.
+//
+// Any JavaScript/Coffee file within this directory, lib/assets/javascripts, vendor/assets/javascripts,
+// or vendor/assets/javascripts of plugins, if any, can be referenced here using a relative path.
+//
+// It's not advisable to add code directly here, but if you do, it'll appear at the bottom of the
+// compiled file.
+//
+// Read Sprockets README (https://github.com/sstephenson/sprockets#sprockets-directives) for details
+// about supported directives.
+//
+//= require_tree .

data/test/dummy/app/assets/stylesheets/application.css

@@ -0,0 +1,15 @@
+/*
+ * This is a manifest file that'll be compiled into application.css, which will include all the files
+ * listed below.
+ *
+ * Any CSS and SCSS file within this directory, lib/assets/stylesheets, vendor/assets/stylesheets,
+ * or vendor/assets/stylesheets of plugins, if any, can be referenced here using a relative path.
+ *
+ * You're free to add application-wide styles to this file and they'll appear at the bottom of the
+ * compiled file so the styles you add here take precedence over styles defined in any styles
+ * defined in the other CSS/SCSS files in this directory. It is generally better to create a new
+ * file per style scope.
+ *
+ *= require_tree .
+ *= require_self
+ */

data/test/dummy/app/controllers/application_controller.rb

@@ -0,0 +1,5 @@
+class ApplicationController < ActionController::Base
+  # Prevent CSRF attacks by raising an exception.
+  # For APIs, you may want to use :null_session instead.
+  protect_from_forgery with: :exception
+end

data/test/dummy/app/helpers/application_helper.rb

@@ -0,0 +1,2 @@
+module ApplicationHelper
+end

data/test/dummy/app/views/layouts/application.html.erb

@@ -0,0 +1,14 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>Dummy</title>
+  <%= stylesheet_link_tag    'application', media: 'all', 'data-turbolinks-track' => true %>
+  <%= javascript_include_tag 'application', 'data-turbolinks-track' => true %>
+  <%= csrf_meta_tags %>
+</head>
+<body>
+
+<%= yield %>
+
+</body>
+</html>

data/test/dummy/bin/bundle

@@ -0,0 +1,3 @@
+#!/usr/bin/env ruby
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../Gemfile', __FILE__)
+load Gem.bin_path('bundler', 'bundle')

data/test/dummy/bin/rails

@@ -0,0 +1,4 @@
+#!/usr/bin/env ruby
+APP_PATH = File.expand_path('../../config/application',  __FILE__)
+require_relative '../config/boot'
+require 'rails/commands'

data/test/dummy/bin/rake

@@ -0,0 +1,4 @@
+#!/usr/bin/env ruby
+require_relative '../config/boot'
+require 'rake'
+Rake.application.run

data/test/dummy/config.ru

@@ -0,0 +1,4 @@
+# This file is used by Rack-based servers to start the application.
+
+require ::File.expand_path('../config/environment',  __FILE__)
+run Rails.application

data/test/dummy/config/application.rb

@@ -0,0 +1,23 @@
+require File.expand_path('../boot', __FILE__)
+
+require 'rails/all'
+
+Bundler.require(*Rails.groups)
+require "concerto_cas_auth"
+
+module Dummy
+  class Application < Rails::Application
+    # Settings in config/environments/* take precedence over those specified here.
+    # Application configuration should go into files in config/initializers
+    # -- all .rb files in that directory are automatically loaded.
+
+    # Set Time.zone default to the specified zone and make Active Record auto-convert to this zone.
+    # Run "rake -D time" for a list of tasks for finding time zone names. Default is UTC.
+    # config.time_zone = 'Central Time (US & Canada)'
+
+    # The default locale is :en and all translations from config/locales/*.rb,yml are auto loaded.
+    # config.i18n.load_path += Dir[Rails.root.join('my', 'locales', '*.{rb,yml}').to_s]
+    # config.i18n.default_locale = :de
+  end
+end
+

data/test/dummy/config/boot.rb

@@ -0,0 +1,5 @@
+# Set up gems listed in the Gemfile.
+ENV['BUNDLE_GEMFILE'] ||= File.expand_path('../../../../Gemfile', __FILE__)
+
+require 'bundler/setup' if File.exist?(ENV['BUNDLE_GEMFILE'])
+$LOAD_PATH.unshift File.expand_path('../../../../lib', __FILE__)

data/test/dummy/config/database.yml

@@ -0,0 +1,25 @@
+# SQLite version 3.x
+#   gem install sqlite3
+#
+#   Ensure the SQLite 3 gem is defined in your Gemfile
+#   gem 'sqlite3'
+#
+default: &default
+  adapter: sqlite3
+  pool: 5
+  timeout: 5000
+
+development:
+  <<: *default
+  database: db/development.sqlite3
+
+# Warning: The database defined as "test" will be erased and
+# re-generated from your development database when you run "rake".
+# Do not set this db to the same as development or production.
+test:
+  <<: *default
+  database: db/test.sqlite3
+
+production:
+  <<: *default
+  database: db/production.sqlite3

data/test/dummy/config/environment.rb

@@ -0,0 +1,5 @@
+# Load the Rails application.
+require File.expand_path('../application', __FILE__)
+
+# Initialize the Rails application.
+Rails.application.initialize!

data/test/dummy/config/environments/development.rb

@@ -0,0 +1,37 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # In the development environment your application's code is reloaded on
+  # every request. This slows down response time but is perfect for development
+  # since you don't have to restart the web server when you make code changes.
+  config.cache_classes = false
+
+  # Do not eager load code on boot.
+  config.eager_load = false
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Don't care if the mailer can't send.
+  config.action_mailer.raise_delivery_errors = false
+
+  # Print deprecation notices to the Rails logger.
+  config.active_support.deprecation = :log
+
+  # Raise an error on page load if there are pending migrations.
+  config.active_record.migration_error = :page_load
+
+  # Debug mode disables concatenation and preprocessing of assets.
+  # This option may cause significant delays in view rendering with a large
+  # number of complex assets.
+  config.assets.debug = true
+
+  # Adds additional error checking when serving assets at runtime.
+  # Checks for improperly declared sprockets dependencies.
+  # Raises helpful error messages.
+  config.assets.raise_runtime_errors = true
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

data/test/dummy/config/environments/production.rb

@@ -0,0 +1,83 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # Code is not reloaded between requests.
+  config.cache_classes = true
+
+  # Eager load code on boot. This eager loads most of Rails and
+  # your application in memory, allowing both threaded web servers
+  # and those relying on copy on write to perform better.
+  # Rake tasks automatically ignore this option for performance.
+  config.eager_load = true
+
+  # Full error reports are disabled and caching is turned on.
+  config.consider_all_requests_local       = false
+  config.action_controller.perform_caching = true
+
+  # Enable Rack::Cache to put a simple HTTP cache in front of your application
+  # Add `rack-cache` to your Gemfile before enabling this.
+  # For large-scale production use, consider using a caching reverse proxy like nginx, varnish or squid.
+  # config.action_dispatch.rack_cache = true
+
+  # Disable Rails's static asset server (Apache or nginx will already do this).
+  config.serve_static_assets = false
+
+  # Compress JavaScripts and CSS.
+  config.assets.js_compressor = :uglifier
+  # config.assets.css_compressor = :sass
+
+  # Do not fallback to assets pipeline if a precompiled asset is missed.
+  config.assets.compile = false
+
+  # Generate digests for assets URLs.
+  config.assets.digest = true
+
+  # Version of your assets, change this if you want to expire all your assets.
+  config.assets.version = '1.0'
+
+  # Specifies the header that your server uses for sending files.
+  # config.action_dispatch.x_sendfile_header = "X-Sendfile" # for apache
+  # config.action_dispatch.x_sendfile_header = 'X-Accel-Redirect' # for nginx
+
+  # Force all access to the app over SSL, use Strict-Transport-Security, and use secure cookies.
+  # config.force_ssl = true
+
+  # Set to :debug to see everything in the log.
+  config.log_level = :info
+
+  # Prepend all log lines with the following tags.
+  # config.log_tags = [ :subdomain, :uuid ]
+
+  # Use a different logger for distributed setups.
+  # config.logger = ActiveSupport::TaggedLogging.new(SyslogLogger.new)
+
+  # Use a different cache store in production.
+  # config.cache_store = :mem_cache_store
+
+  # Enable serving of images, stylesheets, and JavaScripts from an asset server.
+  # config.action_controller.asset_host = "http://assets.example.com"
+
+  # Precompile additional assets.
+  # application.js, application.css, and all non-JS/CSS in app/assets folder are already added.
+  # config.assets.precompile += %w( search.js )
+
+  # Ignore bad email addresses and do not raise email delivery errors.
+  # Set this to true and configure the email server for immediate delivery to raise delivery errors.
+  # config.action_mailer.raise_delivery_errors = false
+
+  # Enable locale fallbacks for I18n (makes lookups for any locale fall back to
+  # the I18n.default_locale when a translation cannot be found).
+  config.i18n.fallbacks = true
+
+  # Send deprecation notices to registered listeners.
+  config.active_support.deprecation = :notify
+
+  # Disable automatic flushing of the log to improve performance.
+  # config.autoflush_log = false
+
+  # Use default logging formatter so that PID and timestamp are not suppressed.
+  config.log_formatter = ::Logger::Formatter.new
+
+  # Do not dump schema after migrations.
+  config.active_record.dump_schema_after_migration = false
+end

data/test/dummy/config/environments/test.rb

@@ -0,0 +1,39 @@
+Rails.application.configure do
+  # Settings specified here will take precedence over those in config/application.rb.
+
+  # The test environment is used exclusively to run your application's
+  # test suite. You never need to work with it otherwise. Remember that
+  # your test database is "scratch space" for the test suite and is wiped
+  # and recreated between test runs. Don't rely on the data there!
+  config.cache_classes = true
+
+  # Do not eager load code on boot. This avoids loading your whole application
+  # just for the purpose of running a single test. If you are using a tool that
+  # preloads Rails for running tests, you may have to set it to true.
+  config.eager_load = false
+
+  # Configure static asset server for tests with Cache-Control for performance.
+  config.serve_static_assets  = true
+  config.static_cache_control = 'public, max-age=3600'
+
+  # Show full error reports and disable caching.
+  config.consider_all_requests_local       = true
+  config.action_controller.perform_caching = false
+
+  # Raise exceptions instead of rendering exception templates.
+  config.action_dispatch.show_exceptions = false
+
+  # Disable request forgery protection in test environment.
+  config.action_controller.allow_forgery_protection = false
+
+  # Tell Action Mailer not to deliver emails to the real world.
+  # The :test delivery method accumulates sent emails in the
+  # ActionMailer::Base.deliveries array.
+  config.action_mailer.delivery_method = :test
+
+  # Print deprecation notices to the stderr.
+  config.active_support.deprecation = :stderr
+
+  # Raises error for missing translations
+  # config.action_view.raise_on_missing_translations = true
+end

data/test/dummy/config/initializers/backtrace_silencers.rb

@@ -0,0 +1,7 @@
+# Be sure to restart your server when you modify this file.
+
+# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
+# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
+
+# You can also remove all the silencers if you're trying to debug a problem that might stem from framework code.
+# Rails.backtrace_cleaner.remove_silencers!

data/test/dummy/config/initializers/cookies_serializer.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.action_dispatch.cookies_serializer = :json

data/test/dummy/config/initializers/filter_parameter_logging.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Configure sensitive parameters which will be filtered from the log file.
+Rails.application.config.filter_parameters += [:password]

data/test/dummy/config/initializers/inflections.rb

@@ -0,0 +1,16 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new inflection rules using the following format. Inflections
+# are locale specific, and you may define rules for as many different
+# locales as you wish. All of these examples are active by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.plural /^(ox)$/i, '\1en'
+#   inflect.singular /^(ox)en/i, '\1'
+#   inflect.irregular 'person', 'people'
+#   inflect.uncountable %w( fish sheep )
+# end
+
+# These inflection rules are supported but not enabled by default:
+# ActiveSupport::Inflector.inflections(:en) do |inflect|
+#   inflect.acronym 'RESTful'
+# end

data/test/dummy/config/initializers/mime_types.rb

@@ -0,0 +1,4 @@
+# Be sure to restart your server when you modify this file.
+
+# Add new mime types for use in respond_to blocks:
+# Mime::Type.register "text/richtext", :rtf

data/test/dummy/config/initializers/session_store.rb

@@ -0,0 +1,3 @@
+# Be sure to restart your server when you modify this file.
+
+Rails.application.config.session_store :cookie_store, key: '_dummy_session'

data/test/dummy/config/initializers/wrap_parameters.rb

@@ -0,0 +1,14 @@
+# Be sure to restart your server when you modify this file.
+
+# This file contains settings for ActionController::ParamsWrapper which
+# is enabled by default.
+
+# Enable parameter wrapping for JSON. You can disable this by setting :format to an empty array.
+ActiveSupport.on_load(:action_controller) do
+  wrap_parameters format: [:json] if respond_to?(:wrap_parameters)
+end
+
+# To enable root element in JSON for ActiveRecord objects.
+# ActiveSupport.on_load(:active_record) do
+#  self.include_root_in_json = true
+# end

data/test/dummy/config/locales/en.yml

@@ -0,0 +1,23 @@
+# Files in the config/locales directory are used for internationalization
+# and are automatically loaded by Rails. If you want to use locales other
+# than English, add the necessary files in this directory.
+#
+# To use the locales, use `I18n.t`:
+#
+#     I18n.t 'hello'
+#
+# In views, this is aliased to just `t`:
+#
+#     <%= t('hello') %>
+#
+# To use a different locale, set it with `I18n.locale`:
+#
+#     I18n.locale = :es
+#
+# This would use the information in config/locales/es.yml.
+#
+# To learn more, please read the Rails Internationalization guide
+# available at http://guides.rubyonrails.org/i18n.html.
+
+en:
+  hello: "Hello world"

data/test/dummy/config/routes.rb

@@ -0,0 +1,4 @@
+Rails.application.routes.draw do
+
+  mount ConcertoCasAuth::Engine => "/concerto_cas_auth"
+end

data/test/dummy/config/secrets.yml

@@ -0,0 +1,22 @@
+# Be sure to restart your server when you modify this file.
+
+# Your secret key is used for verifying the integrity of signed cookies.
+# If you change this key, all old signed cookies will become invalid!
+
+# Make sure the secret is at least 30 characters and all random,
+# no regular words or you'll be exposed to dictionary attacks.
+# You can use `rake secret` to generate a secure secret key.
+
+# Make sure the secrets in this file are kept private
+# if you're sharing your code publicly.
+
+development:
+  secret_key_base: e6cf37c19c51fd26531466f2e1241130c245a0c7535d66a21ad042ffacf76a328186ff066fa5dd66b4c430a4d613048306c64f3ae45c2ffc2bd8bb3689c00e06
+
+test:
+  secret_key_base: 1ff11f6b4d78160298ddf5e0701c88d024ab4a229c910b7cf2c3fac0b53a5bfe310760a12161b51e1e4d408d9ca2ae505ab5e30ce115352e58af1197060e0f03
+
+# Do not keep production secrets in the repository,
+# instead read values from the environment.
+production:
+  secret_key_base: <%= ENV["SECRET_KEY_BASE"] %>

data/test/dummy/public/404.html

@@ -0,0 +1,67 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>The page you were looking for doesn't exist (404)</title>
+  <meta name="viewport" content="width=device-width,initial-scale=1">
+  <style>
+  body {
+    background-color: #EFEFEF;
+    color: #2E2F30;
+    text-align: center;
+    font-family: arial, sans-serif;
+    margin: 0;
+  }
+
+  div.dialog {
+    width: 95%;
+    max-width: 33em;
+    margin: 4em auto 0;
+  }
+
+  div.dialog > div {
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #BBB;
+    border-top: #B00100 solid 4px;
+    border-top-left-radius: 9px;
+    border-top-right-radius: 9px;
+    background-color: white;
+    padding: 7px 12% 0;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+
+  h1 {
+    font-size: 100%;
+    color: #730E15;
+    line-height: 1.5em;
+  }
+
+  div.dialog > p {
+    margin: 0 0 1em;
+    padding: 1em;
+    background-color: #F7F7F7;
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #999;
+    border-bottom-left-radius: 4px;
+    border-bottom-right-radius: 4px;
+    border-top-color: #DADADA;
+    color: #666;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+  </style>
+</head>
+
+<body>
+  <!-- This file lives in public/404.html -->
+  <div class="dialog">
+    <div>
+      <h1>The page you were looking for doesn't exist.</h1>
+      <p>You may have mistyped the address or the page may have moved.</p>
+    </div>
+    <p>If you are the application owner check the logs for more information.</p>
+  </div>
+</body>
+</html>

data/test/dummy/public/422.html

@@ -0,0 +1,67 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>The change you wanted was rejected (422)</title>
+  <meta name="viewport" content="width=device-width,initial-scale=1">
+  <style>
+  body {
+    background-color: #EFEFEF;
+    color: #2E2F30;
+    text-align: center;
+    font-family: arial, sans-serif;
+    margin: 0;
+  }
+
+  div.dialog {
+    width: 95%;
+    max-width: 33em;
+    margin: 4em auto 0;
+  }
+
+  div.dialog > div {
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #BBB;
+    border-top: #B00100 solid 4px;
+    border-top-left-radius: 9px;
+    border-top-right-radius: 9px;
+    background-color: white;
+    padding: 7px 12% 0;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+
+  h1 {
+    font-size: 100%;
+    color: #730E15;
+    line-height: 1.5em;
+  }
+
+  div.dialog > p {
+    margin: 0 0 1em;
+    padding: 1em;
+    background-color: #F7F7F7;
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #999;
+    border-bottom-left-radius: 4px;
+    border-bottom-right-radius: 4px;
+    border-top-color: #DADADA;
+    color: #666;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+  </style>
+</head>
+
+<body>
+  <!-- This file lives in public/422.html -->
+  <div class="dialog">
+    <div>
+      <h1>The change you wanted was rejected.</h1>
+      <p>Maybe you tried to change something you didn't have access to.</p>
+    </div>
+    <p>If you are the application owner check the logs for more information.</p>
+  </div>
+</body>
+</html>

data/test/dummy/public/500.html

@@ -0,0 +1,66 @@
+<!DOCTYPE html>
+<html>
+<head>
+  <title>We're sorry, but something went wrong (500)</title>
+  <meta name="viewport" content="width=device-width,initial-scale=1">
+  <style>
+  body {
+    background-color: #EFEFEF;
+    color: #2E2F30;
+    text-align: center;
+    font-family: arial, sans-serif;
+    margin: 0;
+  }
+
+  div.dialog {
+    width: 95%;
+    max-width: 33em;
+    margin: 4em auto 0;
+  }
+
+  div.dialog > div {
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #BBB;
+    border-top: #B00100 solid 4px;
+    border-top-left-radius: 9px;
+    border-top-right-radius: 9px;
+    background-color: white;
+    padding: 7px 12% 0;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+
+  h1 {
+    font-size: 100%;
+    color: #730E15;
+    line-height: 1.5em;
+  }
+
+  div.dialog > p {
+    margin: 0 0 1em;
+    padding: 1em;
+    background-color: #F7F7F7;
+    border: 1px solid #CCC;
+    border-right-color: #999;
+    border-left-color: #999;
+    border-bottom-color: #999;
+    border-bottom-left-radius: 4px;
+    border-bottom-right-radius: 4px;
+    border-top-color: #DADADA;
+    color: #666;
+    box-shadow: 0 3px 8px rgba(50, 50, 50, 0.17);
+  }
+  </style>
+</head>
+
+<body>
+  <!-- This file lives in public/500.html -->
+  <div class="dialog">
+    <div>
+      <h1>We're sorry, but something went wrong.</h1>
+    </div>
+    <p>If you are the application owner check the logs for more information.</p>
+  </div>
+</body>
+</html>

data/test/fixtures/concerto_cas_auth/identities.yml

@@ -0,0 +1,11 @@
+# Read about fixtures at http://api.rubyonrails.org/classes/ActiveRecord/Fixtures.html
+
+# This model initially had no columns defined.  If you add columns to the
+# model remove the '{}' from the fixture names and add the columns immediately
+# below each fixture, per the syntax in the comments below
+#
+one: {}
+# column: value
+#
+two: {}
+#  column: value

data/test/integration/navigation_test.rb

@@ -0,0 +1,10 @@
+require 'test_helper'
+
+class NavigationTest < ActionDispatch::IntegrationTest
+  fixtures :all
+
+  # test "the truth" do
+  #   assert true
+  # end
+end
+

data/test/test_helper.rb

@@ -0,0 +1,15 @@
+# Configure Rails Environment
+ENV["RAILS_ENV"] = "test"
+
+require File.expand_path("../dummy/config/environment.rb",  __FILE__)
+require "rails/test_help"
+
+Rails.backtrace_cleaner.remove_silencers!
+
+# Load support files
+Dir["#{File.dirname(__FILE__)}/support/**/*.rb"].each { |f| require f }
+
+# Load fixtures from the engine
+if ActiveSupport::TestCase.method_defined?(:fixture_path=)
+  ActiveSupport::TestCase.fixture_path = File.expand_path("../fixtures", __FILE__)
+end

data/test/unit/concerto_cas_auth/identity_test.rb

@@ -0,0 +1,9 @@
+require 'test_helper'
+
+module ConcertoCasAuth
+  class IdentityTest < ActiveSupport::TestCase
+    # test "the truth" do
+    #   assert true
+    # end
+  end
+end

metadata

@@ -0,0 +1,176 @@
+--- !ruby/object:Gem::Specification
+name: concerto_cas_auth
+version: !ruby/object:Gem::Version
+  version: 0.0.2
+platform: ruby
+authors:
+- Gabe Perez
+autorequire: 
+bindir: bin
+cert_chain: []
+date: 2014-07-25 00:00:00.000000000 Z
+dependencies:
+- !ruby/object:Gem::Dependency
+  name: rails
+  requirement: !ruby/object:Gem::Requirement
+    requirements:
+    - - ~>
+      - !ruby/object:Gem::Version
+        version: 3.2.9
+  type: :runtime
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    requirements:
+    - - ~>
+      - !ruby/object:Gem::Version
+        version: 3.2.9
+- !ruby/object:Gem::Dependency
+  name: omniauth-cas
+  requirement: !ruby/object:Gem::Requirement
+    requirements:
+    - - '>='
+      - !ruby/object:Gem::Version
+        version: '0'
+  type: :runtime
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    requirements:
+    - - '>='
+      - !ruby/object:Gem::Version
+        version: '0'
+- !ruby/object:Gem::Dependency
+  name: concerto_identity
+  requirement: !ruby/object:Gem::Requirement
+    requirements:
+    - - ~>
+      - !ruby/object:Gem::Version
+        version: 0.0.1
+  type: :runtime
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    requirements:
+    - - ~>
+      - !ruby/object:Gem::Version
+        version: 0.0.1
+description: Authorize Concerto users with CAS
+email:
+- perez283@gmail.com
+executables: []
+extensions: []
+extra_rdoc_files: []
+files:
+- app/assets/javascripts/concerto_cas_auth/application.js
+- app/assets/stylesheets/concerto_cas_auth/application.css
+- app/controllers/concerto_cas_auth/application_controller.rb
+- app/controllers/concerto_cas_auth/omniauth_callback_controller.rb
+- app/helpers/concerto_cas_auth/application_helper.rb
+- app/views/concerto_cas_auth/omniauth_cas/_signin.html.erb
+- config/concerto_cas_auth.yml.sample
+- config/initializers/omniauth.rb
+- config/routes.rb
+- lib/concerto_cas_auth/engine.rb
+- lib/concerto_cas_auth/version.rb
+- lib/concerto_cas_auth.rb
+- lib/tasks/concerto_cas_auth_tasks.rake
+- LICENSE
+- Rakefile
+- README.md
+- test/concerto_cas_auth_test.rb
+- test/dummy/app/assets/javascripts/application.js
+- test/dummy/app/assets/stylesheets/application.css
+- test/dummy/app/controllers/application_controller.rb
+- test/dummy/app/helpers/application_helper.rb
+- test/dummy/app/views/layouts/application.html.erb
+- test/dummy/bin/bundle
+- test/dummy/bin/rails
+- test/dummy/bin/rake
+- test/dummy/config/application.rb
+- test/dummy/config/boot.rb
+- test/dummy/config/database.yml
+- test/dummy/config/environment.rb
+- test/dummy/config/environments/development.rb
+- test/dummy/config/environments/production.rb
+- test/dummy/config/environments/test.rb
+- test/dummy/config/initializers/backtrace_silencers.rb
+- test/dummy/config/initializers/cookies_serializer.rb
+- test/dummy/config/initializers/filter_parameter_logging.rb
+- test/dummy/config/initializers/inflections.rb
+- test/dummy/config/initializers/mime_types.rb
+- test/dummy/config/initializers/session_store.rb
+- test/dummy/config/initializers/wrap_parameters.rb
+- test/dummy/config/locales/en.yml
+- test/dummy/config/routes.rb
+- test/dummy/config/secrets.yml
+- test/dummy/config.ru
+- test/dummy/public/404.html
+- test/dummy/public/422.html
+- test/dummy/public/500.html
+- test/dummy/public/favicon.ico
+- test/dummy/Rakefile
+- test/dummy/README.rdoc
+- test/fixtures/concerto_cas_auth/identities.yml
+- test/integration/navigation_test.rb
+- test/test_helper.rb
+- test/unit/concerto_cas_auth/identity_test.rb
+homepage: http://www.concerto-signage.org
+licenses:
+- Apache-2.0
+metadata: {}
+post_install_message: 
+rdoc_options: []
+require_paths:
+- lib
+required_ruby_version: !ruby/object:Gem::Requirement
+  requirements:
+  - - '>='
+    - !ruby/object:Gem::Version
+      version: '0'
+required_rubygems_version: !ruby/object:Gem::Requirement
+  requirements:
+  - - '>='
+    - !ruby/object:Gem::Version
+      version: '0'
+requirements: []
+rubyforge_project: 
+rubygems_version: 2.0.14
+signing_key: 
+specification_version: 4
+summary: Provides user authentication using CAS
+test_files:
+- test/concerto_cas_auth_test.rb
+- test/dummy/app/assets/javascripts/application.js
+- test/dummy/app/assets/stylesheets/application.css
+- test/dummy/app/controllers/application_controller.rb
+- test/dummy/app/helpers/application_helper.rb
+- test/dummy/app/views/layouts/application.html.erb
+- test/dummy/bin/bundle
+- test/dummy/bin/rails
+- test/dummy/bin/rake
+- test/dummy/config/application.rb
+- test/dummy/config/boot.rb
+- test/dummy/config/database.yml
+- test/dummy/config/environment.rb
+- test/dummy/config/environments/development.rb
+- test/dummy/config/environments/production.rb
+- test/dummy/config/environments/test.rb
+- test/dummy/config/initializers/backtrace_silencers.rb
+- test/dummy/config/initializers/cookies_serializer.rb
+- test/dummy/config/initializers/filter_parameter_logging.rb
+- test/dummy/config/initializers/inflections.rb
+- test/dummy/config/initializers/mime_types.rb
+- test/dummy/config/initializers/session_store.rb
+- test/dummy/config/initializers/wrap_parameters.rb
+- test/dummy/config/locales/en.yml
+- test/dummy/config/routes.rb
+- test/dummy/config/secrets.yml
+- test/dummy/config.ru
+- test/dummy/public/404.html
+- test/dummy/public/422.html
+- test/dummy/public/500.html
+- test/dummy/public/favicon.ico
+- test/dummy/Rakefile
+- test/dummy/README.rdoc
+- test/fixtures/concerto_cas_auth/identities.yml
+- test/integration/navigation_test.rb
+- test/test_helper.rb
+- test/unit/concerto_cas_auth/identity_test.rb