cave_gen 0.1.1

checksums.yaml

@@ -0,0 +1,7 @@
+---
+SHA1:
+  metadata.gz: b11510609536968e6056d954ddca355949fa5726
+  data.tar.gz: 66d0503e91d05df8a9f4bb280791cb6b7db25ed5
+SHA512:
+  metadata.gz: e7d8d7d91f70ad28b9810537afec77ab00ea1615fe62fb5a25d26d250cbb8fde5b06effdacd3596167dd67fafb68885e7fe6f3953894f8a54844b8513d575081
+  data.tar.gz: 69cc606ed2aa26726ea61ffc38f123ebcec5e22fa946da0938e3fdb48dc9e1270cb475e3a98ed3e6cec5f7e3965aa98aafeb0b26fdd3d6e75195ea88309ae4fe

data/.gitignore

@@ -0,0 +1,12 @@
+/.bundle/
+/.yardoc
+/Gemfile.lock
+/_yardoc/
+/coverage/
+/doc/
+/pkg/
+/spec/reports/
+/tmp/
+.idea/
+.idea/*
+

data/.travis.yml

@@ -0,0 +1,3 @@
+language: ruby
+rvm:
+  - 2.1.5

data/Gemfile

@@ -0,0 +1,6 @@
+source 'https://rubygems.org'
+
+# Specify your gem's dependencies in cave_gen.gemspec
+gem 'rspec'
+
+gemspec

data/LICENSE

@@ -0,0 +1,3 @@
+== GameRuby
+
+Put appropriate LICENSE for your project here.

data/LICENSE.txt

@@ -0,0 +1,21 @@
+The MIT License (MIT)
+
+Copyright (c) 2015 nikitasmall
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.

data/README

@@ -0,0 +1,3 @@
+== GameRuby
+
+You should document your project here.

data/README.md

@@ -0,0 +1,45 @@
+# CaveGen
+
+A little gem to create a random caves. For your games (roguelikes or similar) or just for fun.
+
+## Installation
+
+Add this line to your application's Gemfile:
+
+```ruby
+gem 'cave_gen'
+```
+
+And then execute:
+
+    $ bundle
+
+Or install it yourself as:
+
+    $ gem install cave_gen
+
+## Usage
+
+It is very easy to create your own caves!
+
+```ruby
+cave = CaveGen::Cave.new(height, width, error, opacity)
+cave.show_map
+```
+height and width is a numbers of rows and columns in your array.
+error is a numbers of attempts to continue build cave from another place on map.
+opacity is a number that shows curlicue of your cave. The higher number makes simpler cave.
+
+## Development
+
+After checking out the repo, run `bin/setup` to install dependencies. Then, run `bin/console` for an interactive prompt that will allow you to experiment.
+
+To install this gem onto your local machine, run `bundle exec rake install`. To release a new version, update the version number in `version.rb`, and then run `bundle exec rake release` to create a git tag for the version, push git commits and tags, and push the `.gem` file to [rubygems.org](https://rubygems.org).
+
+## Contributing
+
+1. Fork it ( https://github.com/nikitasmall/cave_gen/fork )
+2. Create your feature branch (`git checkout -b my-new-feature`)
+3. Commit your changes (`git commit -am 'Add some feature'`)
+4. Push to the branch (`git push origin my-new-feature`)
+5. Create a new Pull Request

data/Rakefile

@@ -0,0 +1 @@
+require "bundler/gem_tasks"

data/bin/console

@@ -0,0 +1,14 @@
+#!/usr/bin/env ruby
+
+require "bundler/setup"
+require "cave_gen"
+
+# You can add fixtures and/or initialization code here to make experimenting
+# with your gem easier. You can also use a different console, if you like.
+
+# (If you use this, don't forget to add pry to your Gemfile!)
+# require "pry"
+# Pry.start
+
+require "irb"
+IRB.start

data/bin/setup

@@ -0,0 +1,7 @@
+#!/bin/bash
+set -euo pipefail
+IFS=$'\n\t'
+
+bundle install
+
+# Do any other automated setup that you need to do here

data/cave_gen.gemspec

@@ -0,0 +1,28 @@
+# coding: utf-8
+lib = File.expand_path('../lib', __FILE__)
+$LOAD_PATH.unshift(lib) unless $LOAD_PATH.include?(lib)
+require 'cave_gen/version'
+
+Gem::Specification.new do |spec|
+  spec.name          = "cave_gen"
+  spec.version       = CaveGen::VERSION
+  spec.authors       = ["nikitasmall"]
+  spec.email         = ["nikitasosnov@yahoo.com"]
+
+  spec.summary       = "A little gem to create a random caves. For your games (roguelikes or similar) or just for fun."
+  spec.homepage      = "https://github.com/NikitaSmall/cave_gen.git"
+  spec.license       = "MIT"
+
+  spec.files         = `git ls-files -z`.split("\x0").reject { |f| f.match(%r{^(test|spec|features)/}) }
+  spec.bindir        = "exe"
+  spec.executables   = spec.files.grep(%r{^exe/}) { |f| File.basename(f) }
+  spec.require_paths = ["lib"]
+
+  #if spec.respond_to?(:metadata)
+  #  spec.metadata['allowed_push_host'] = "TODO: Set to 'http://mygemserver.com' to prevent pushes to rubygems.org, or delete to allow pushes to any server."
+  #end
+
+  spec.add_development_dependency "bundler", "~> 1.8"
+  spec.add_development_dependency "rake", "~> 10.0"
+  spec.add_development_dependency "rspec", "~> 2.6"
+end

data/lib/cave_gen.rb

@@ -0,0 +1,26 @@
+require 'cave_gen/version'
+require 'cave_gen/map'
+
+module CaveGen
+  class Cave
+    def initialize(height = 20, width = 20, error = 100, opacity = 7)
+      @map = Map.new(height, width, error, opacity)
+      @map.generate_map
+
+      @map
+    end
+
+    def show_map
+      @map.show_map
+    end
+
+    def get_string
+      @map.to_s
+    end
+
+    def to_symbol_array
+      @map.to_symbol_array
+    end
+
+  end
+end

data/lib/cave_gen/map.rb

@@ -0,0 +1,148 @@
+require_relative 'tile'
+
+# класс карты, в котором и происходит всё веселье
+class Map
+
+  # изначально карта принимает два параментра для инициализации - высоты и ширину, образуя массив
+  # каждый элемент массива - тайл. Счётчик остановки используется, чтобы не делать бесконечного цикла
+  def initialize(height = 20, width = 20, error = 100, opacity = 7)
+    @height = height
+    @width = width
+    @stop = 0
+    @error = error
+    @opacity_challenge = opacity
+
+    rows, cols = @width, @height
+
+    @grid = Array.new(cols)
+    cols.times do |y|
+      @grid[y] = Array.new(rows)
+      rows.times do |x|
+        @grid[y][x] = Wall.new(y, x)
+      end
+    end
+  end
+
+  # показываем всю карту
+  def show_map
+    @grid.each do |y|
+      y.each do |x|
+        x.print_tile
+      end
+      print "\n"
+    end
+  end
+
+  # метод содания карты. Берётся случайная первая точка, после чего выбирается направление и осуществляется проверка
+  # на возможность проложить пол. Циклично, до тех пор, пока не накопится счётик остановки
+  def generate_map
+
+    @curr_point = get_rand_point
+    while end_generation? do
+      check_point_to_floor(@curr_point[0], @curr_point[1])
+      @curr_point = get_next_point(@curr_point[0], @curr_point[1])
+    end
+  end
+
+  # выбор первой случайной точки
+  def get_rand_point
+    @rand_point = [rand(1..@height-2), rand(1..@width-2)]
+  end
+
+  # проверка точки - может ли она быть полом (считается по окружению)
+  # вне зависимости от результата, после проверки точка будет считаться "использованной", т.е. на неё больше не пойдут
+  def check_point_to_floor(y_coord, x_coord)
+    @grid[y_coord][x_coord].touched = 1
+    (y_coord-1..y_coord+1).each do |y|
+      (x_coord-1..x_coord+1).each do |x|
+        if @grid[y][x].is_floor?
+          @grid[y_coord][x_coord].opacity += 1
+        end
+      end
+    end
+    if @grid[y_coord][x_coord].opacity < @opacity_challenge
+      @grid[y_coord][x_coord] = Floor.new(y_coord, x_coord, @grid[y_coord][x_coord].opacity)
+    end
+  end
+
+  # алгоритм выбора следующей точки. Место наибольшей сложности
+  def get_next_point(y_coord, x_coord)
+    while end_generation? do
+      directions = Array.new
+      if y_coord - 1 > 0
+        if @grid[y_coord - 1][x_coord].touched != 1
+          directions << 0
+        end
+      end
+      if x_coord + 1 < @width - 1
+        if @grid[y_coord][x_coord + 1].touched != 1
+          directions << 1
+        end
+      end
+      if y_coord + 1 < @height - 1
+        if @grid[y_coord + 1][x_coord].touched != 1
+          directions << 2
+        end
+      end
+      if x_coord - 1 > 0
+        if @grid[y_coord][x_coord - 1].touched != 1
+          directions << 3
+        end
+      end
+
+      unless directions.empty?
+        direction = directions.sample
+      else
+        y_coord, x_coord = get_rand_point
+        @stop += 10
+        next
+      end
+      case direction
+        when 0
+          return [y_coord - 1, x_coord]
+        when 1
+          return [y_coord, x_coord + 1]
+        when 2
+          return [y_coord + 1, x_coord]
+        when 3
+          return [y_coord, x_coord - 1]
+      end
+
+    end
+  end
+
+  # метод проверки генерации. Завершает её, если число остановки (количества ошибок) стало слишком большим.
+  def end_generation?
+    if @stop < @error
+      return true
+    else
+      return false
+    end
+  end
+
+  def is_floor?(y_coord, x_coord)
+    return @grid[y_coord][x_coord].is_floor?
+  end
+
+  def to_s
+    string = ''
+    @grid.each do |y|
+      y.each do |x|
+        string = string + x.get_tile
+      end
+      string = string + "\n"
+    end
+    return string
+  end
+
+  def to_symbol_array
+    string = Array.new
+    @grid.each_with_index do |y, y_index|
+      y.each_with_index do |x, x_index|
+        string[y_index][y_index] = x.get_tile
+      end
+    end
+    return string
+  end
+
+end

data/lib/cave_gen/tile.rb

@@ -0,0 +1,51 @@
+class BaseTile
+  attr_accessor :x
+  attr_accessor :y
+  attr_accessor :opacity
+  attr_accessor :touched
+  attr_accessor :symbol
+
+  def initialize(y, x, opacity = 0, touched = 0)
+    @y = y
+    @x = x
+    @touched = touched
+    @opacity = opacity
+    @symbol = " "
+  end
+
+  def print_tile
+    print @symbol
+  end
+
+  def get_tile
+    @symbol
+  end
+
+  def is_floor?
+    return false
+  end
+
+end
+
+# Класс Тайла. Описывается двумя возможными свойствами - пол это (или стены) и окружение другими тайлами
+# Число окружения повышается, когда вокруг этого тайла находятся тайлы, которые "полы".
+class Floor < BaseTile
+
+  def initialize(y, x, opacity = 0, touched = 0)
+    super(y, x, opacity, touched)
+    @symbol = "."
+  end
+
+  def is_floor?
+    return true
+  end
+
+end
+
+class Wall < BaseTile
+
+  def initialize(y, x, opacity = 0, touched = 0)
+    super(y, x, opacity, touched)
+    @symbol = "#"
+  end
+end

data/lib/cave_gen/version.rb

@@ -0,0 +1,3 @@
+module CaveGen
+  VERSION = "0.1.1"
+end

metadata

@@ -0,0 +1,102 @@
+--- !ruby/object:Gem::Specification
+name: cave_gen
+version: !ruby/object:Gem::Version
+  version: 0.1.1
+platform: ruby
+authors:
+- nikitasmall
+autorequire: 
+bindir: exe
+cert_chain: []
+date: 2015-03-17 00:00:00.000000000 Z
+dependencies:
+- !ruby/object:Gem::Dependency
+  name: bundler
+  requirement: !ruby/object:Gem::Requirement
+    requirements:
+    - - "~>"
+      - !ruby/object:Gem::Version
+        version: '1.8'
+  type: :development
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    requirements:
+    - - "~>"
+      - !ruby/object:Gem::Version
+        version: '1.8'
+- !ruby/object:Gem::Dependency
+  name: rake
+  requirement: !ruby/object:Gem::Requirement
+    requirements:
+    - - "~>"
+      - !ruby/object:Gem::Version
+        version: '10.0'
+  type: :development
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    requirements:
+    - - "~>"
+      - !ruby/object:Gem::Version
+        version: '10.0'
+- !ruby/object:Gem::Dependency
+  name: rspec
+  requirement: !ruby/object:Gem::Requirement
+    requirements:
+    - - "~>"
+      - !ruby/object:Gem::Version
+        version: '2.6'
+  type: :development
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    requirements:
+    - - "~>"
+      - !ruby/object:Gem::Version
+        version: '2.6'
+description: 
+email:
+- nikitasosnov@yahoo.com
+executables: []
+extensions: []
+extra_rdoc_files: []
+files:
+- ".gitignore"
+- ".travis.yml"
+- Gemfile
+- LICENSE
+- LICENSE.txt
+- README
+- README.md
+- Rakefile
+- bin/console
+- bin/setup
+- cave_gen.gemspec
+- lib/cave_gen.rb
+- lib/cave_gen/map.rb
+- lib/cave_gen/tile.rb
+- lib/cave_gen/version.rb
+homepage: https://github.com/NikitaSmall/cave_gen.git
+licenses:
+- MIT
+metadata: {}
+post_install_message: 
+rdoc_options: []
+require_paths:
+- lib
+required_ruby_version: !ruby/object:Gem::Requirement
+  requirements:
+  - - ">="
+    - !ruby/object:Gem::Version
+      version: '0'
+required_rubygems_version: !ruby/object:Gem::Requirement
+  requirements:
+  - - ">="
+    - !ruby/object:Gem::Version
+      version: '0'
+requirements: []
+rubyforge_project: 
+rubygems_version: 2.2.2
+signing_key: 
+specification_version: 4
+summary: A little gem to create a random caves. For your games (roguelikes or similar)
+  or just for fun.
+test_files: []