capybara-rack_test-screenshot 0.1.0

checksums.yaml

@@ -0,0 +1,7 @@
+---
+SHA256:
+  metadata.gz: 6039bb83ad6f645896e9d1ee68894c2e7ebbee5403a49239b21968115e0231f1
+  data.tar.gz: f4189a2f768e6dcd6067042edc04978e854d349f030b0430eab80a62f4309b90
+SHA512:
+  metadata.gz: 9852f3e869492a90c8eb6711d91c280b3ee8362e3a9b2a30be1f84031d4458ef75992766da1650fc34405faedb2765dcd36c9583b29a45f902679428dff6d716
+  data.tar.gz: 1f1b23aa92132b47e40aa7badbd811b289c361a8dcc3abc6c0a61b3b1a0514b4cd430476a5fc39b203e3c5a41dd5e500acb74f161fbf97b356dca9fa6b6b462f

data/.rspec

@@ -0,0 +1 @@
+--require spec_helper

data/CHANGELOG.md

@@ -0,0 +1,5 @@
+## [Unreleased]
+
+## [0.1.0] - 2024-03-14
+
+- Initial release

data/CODE_OF_CONDUCT.md

@@ -0,0 +1,84 @@
+# Contributor Covenant Code of Conduct
+
+## Our Pledge
+
+We as members, contributors, and leaders pledge to make participation in our community a harassment-free experience for everyone, regardless of age, body size, visible or invisible disability, ethnicity, sex characteristics, gender identity and expression, level of experience, education, socio-economic status, nationality, personal appearance, race, religion, or sexual identity and orientation.
+
+We pledge to act and interact in ways that contribute to an open, welcoming, diverse, inclusive, and healthy community.
+
+## Our Standards
+
+Examples of behavior that contributes to a positive environment for our community include:
+
+* Demonstrating empathy and kindness toward other people
+* Being respectful of differing opinions, viewpoints, and experiences
+* Giving and gracefully accepting constructive feedback
+* Accepting responsibility and apologizing to those affected by our mistakes, and learning from the experience
+* Focusing on what is best not just for us as individuals, but for the overall community
+
+Examples of unacceptable behavior include:
+
+* The use of sexualized language or imagery, and sexual attention or
+  advances of any kind
+* Trolling, insulting or derogatory comments, and personal or political attacks
+* Public or private harassment
+* Publishing others' private information, such as a physical or email
+  address, without their explicit permission
+* Other conduct which could reasonably be considered inappropriate in a
+  professional setting
+
+## Enforcement Responsibilities
+
+Community leaders are responsible for clarifying and enforcing our standards of acceptable behavior and will take appropriate and fair corrective action in response to any behavior that they deem inappropriate, threatening, offensive, or harmful.
+
+Community leaders have the right and responsibility to remove, edit, or reject comments, commits, code, wiki edits, issues, and other contributions that are not aligned to this Code of Conduct, and will communicate reasons for moderation decisions when appropriate.
+
+## Scope
+
+This Code of Conduct applies within all community spaces, and also applies when an individual is officially representing the community in public spaces. Examples of representing our community include using an official e-mail address, posting via an official social media account, or acting as an appointed representative at an online or offline event.
+
+## Enforcement
+
+Instances of abusive, harassing, or otherwise unacceptable behavior may be reported to the community leaders responsible for enforcement at theodor@tonum.no. All complaints will be reviewed and investigated promptly and fairly.
+
+All community leaders are obligated to respect the privacy and security of the reporter of any incident.
+
+## Enforcement Guidelines
+
+Community leaders will follow these Community Impact Guidelines in determining the consequences for any action they deem in violation of this Code of Conduct:
+
+### 1. Correction
+
+**Community Impact**: Use of inappropriate language or other behavior deemed unprofessional or unwelcome in the community.
+
+**Consequence**: A private, written warning from community leaders, providing clarity around the nature of the violation and an explanation of why the behavior was inappropriate. A public apology may be requested.
+
+### 2. Warning
+
+**Community Impact**: A violation through a single incident or series of actions.
+
+**Consequence**: A warning with consequences for continued behavior. No interaction with the people involved, including unsolicited interaction with those enforcing the Code of Conduct, for a specified period of time. This includes avoiding interactions in community spaces as well as external channels like social media. Violating these terms may lead to a temporary or permanent ban.
+
+### 3. Temporary Ban
+
+**Community Impact**: A serious violation of community standards, including sustained inappropriate behavior.
+
+**Consequence**: A temporary ban from any sort of interaction or public communication with the community for a specified period of time. No public or private interaction with the people involved, including unsolicited interaction with those enforcing the Code of Conduct, is allowed during this period. Violating these terms may lead to a permanent ban.
+
+### 4. Permanent Ban
+
+**Community Impact**: Demonstrating a pattern of violation of community standards, including sustained inappropriate behavior,  harassment of an individual, or aggression toward or disparagement of classes of individuals.
+
+**Consequence**: A permanent ban from any sort of public interaction within the community.
+
+## Attribution
+
+This Code of Conduct is adapted from the [Contributor Covenant][homepage], version 2.0,
+available at https://www.contributor-covenant.org/version/2/0/code_of_conduct.html.
+
+Community Impact Guidelines were inspired by [Mozilla's code of conduct enforcement ladder](https://github.com/mozilla/diversity).
+
+[homepage]: https://www.contributor-covenant.org
+
+For answers to common questions about this code of conduct, see the FAQ at
+https://www.contributor-covenant.org/faq. Translations are available at https://www.contributor-covenant.org/translations.

data/LICENSE.txt

@@ -0,0 +1,21 @@
+The MIT License (MIT)
+
+Copyright (c) 2024 Theodor Tonum
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.

data/README.md

@@ -0,0 +1,112 @@
+# Generate screenshots with RackTest
+
+Makes `save_screenshot` behave as if you were using a regular browser when using `rack` as your Capybara driver.
+
+Will by default render pages in a 1400x1400 viewport.
+
+Generates screenshots using [playwright-ruby-client](https://github.com/YusukeIwaki/playwright-ruby-client).
+
+Very useful for showing screenshots on failed examples like this:
+
+```rb
+RSpec.configure do |config|
+  config.after(:each) do |example|
+    if example.exception
+      path = save_screenshot
+      puts "Screenshot at #{path}"
+    end
+  end
+
+  # Or for Rails projects
+  config.after(:each) do |example|
+    if example.exception
+      take_screenshot(screenshot: 'inline')
+    end
+  end
+end
+```
+
+## Installation
+
+Install the gem and add to the application's Gemfile by executing:
+
+    $ bundle add capybara-rack_test-screenshot --group test
+
+If bundler is not being used to manage dependencies, install the gem by executing:
+
+    $ gem install capybara-rack_test-screenshot
+
+## Configuration
+
+You'll need to configure `Capybara.asset_host` in order for Playwright to render the page properly. This should point to a running development server of your application.
+
+```rb
+Capybara.asset_host = "http://localhost:3000
+```
+
+Optional settings:
+
+```rb
+Capybara::RackTest::Screenshot.viewport = { width: 1920, height: 1080 }
+
+Capybara::RackTest::Screenshot.default_viewport = { width: 1920, height: 1080 }
+# See Viewports below for details
+```
+
+In some cases, it might make sense to preload the playwright browser used for screenshots:
+
+```rb
+Capybara::RackTest::Screenshot.preload!
+```
+
+You can override the path to the playwright binary by setting `PLAYWRIGHT_CLI_EXE_PATH`. By default the gem will call `npx playwright`.
+
+## Usage
+
+Then use `save_screenshot` in your tests as if you were using any JS enabled driver.
+
+```rb
+example "my browser test" do
+  page.visit "http://example.com"
+  page.save_screenshot
+end
+```
+
+### Viewports
+
+In some cases, you might have different viewports for different tests.
+
+If you have some default viewport you'd prefer to use, configure that with `default_viewport` and set `viewport` close to where you declare the viewport for your driver. Before (or after) each test, call `Capybara::RackTest::Screenshot.reset_viewport!` to revert to the default.
+
+```rb
+Capybara::RackTest::Screenshot.default_viewport = { width: 1920, height: 1080 }
+
+RSpec.configure do |config|
+  config.before(:each, type: :system, mobile: true) do
+    driven_by :rack, options: { viewport: { width: 375, height: 812 } }
+    Capybara::RackTest::Screenshot.viewport = { width: 375, height: 812 }
+  end
+
+  config.after(:each) do
+    Capybara::RackTest::Screenshot.reset_viewport!
+  end
+end
+```
+
+## Development
+
+After checking out the repo, run `bin/setup` to install dependencies. You can also run `bin/console` for an interactive prompt that will allow you to experiment.
+
+To install this gem onto your local machine, run `bundle exec rake install`. To release a new version, update the version number in `version.rb`, and then run `bundle exec rake release`, which will create a git tag for the version, push git commits and the created tag, and push the `.gem` file to [rubygems.org](https://rubygems.org).
+
+## Contributing
+
+Bug reports and pull requests are welcome on GitHub at https://github.com/theodorton/capybara-rack_test-screenshot. This project is intended to be a safe, welcoming space for collaboration, and contributors are expected to adhere to the [code of conduct](https://github.com/theodorton/capybara-rack_test-screenshot/blob/main/CODE_OF_CONDUCT.md).
+
+## License
+
+The gem is available as open source under the terms of the [MIT License](https://opensource.org/licenses/MIT).
+
+## Code of Conduct
+
+Everyone interacting in the Capybara::RackTest::Screenshot project's codebases, issue trackers, chat rooms and mailing lists is expected to follow the [code of conduct](https://github.com/theodorton/capybara-rack_test-screenshot/blob/main/CODE_OF_CONDUCT.md).

data/Rakefile

@@ -0,0 +1,4 @@
+# frozen_string_literal: true
+
+require "bundler/gem_tasks"
+task default: %i[]

data/lib/capybara/rack_test/screenshot/railtie.rb

@@ -0,0 +1,8 @@
+if defined?(ActiveSupport)
+  require 'action_dispatch/system_testing/test_helpers/screenshot_helper'
+  module ActionDispatch::SystemTesting::TestHelpers::ScreenshotHelper
+    def supports_screenshot?
+      true
+    end
+  end
+end

data/lib/capybara/rack_test/screenshot/version.rb

@@ -0,0 +1,9 @@
+# frozen_string_literal: true
+
+module Capybara
+  module RackTest
+    module Screenshot
+      VERSION = "0.1.0"
+    end
+  end
+end

data/lib/capybara/rack_test/screenshot.rb

@@ -0,0 +1,107 @@
+# frozen_string_literal: true
+
+require 'capybara'
+require 'playwright'
+require_relative "screenshot/version"
+
+module Capybara
+  module RackTest
+    module Screenshot
+      class << self
+        attr_reader :default_viewport
+        attr_accessor :viewport, :base_url
+
+        def default_viewport=(viewport)
+          @default_viewport = viewport
+          reset_viewport!
+        end
+
+        def save_screenshot(path, driver, **options)
+          ensure_asset_host!
+
+          with_html_page(driver) do |page_path|
+            page = browser.new_page(viewport: viewport, javaScriptEnabled: false)
+            page.goto("file://#{page_path}")
+            page.screenshot(path: path)
+            page.close
+          end
+        end
+
+        def preload!
+          Thread.new do
+            browser_semaphore.synchronize do
+              @browser = create_browser
+            end
+          end
+        end
+
+        def reset_viewport!
+          self.viewport = default_viewport
+        end
+
+        private
+
+        attr_accessor :browser_semaphore
+
+        def browser
+          browser_semaphore.synchronize do
+            @browser ||= create_browser
+          end
+        end
+
+        def create_browser
+          pw = ::Playwright.create(playwright_cli_executable_path: playwright_cli_executable_path)
+          browser = pw.playwright.chromium.launch(headless: true, args: ['--disable-web-security'])
+          at_exit { pw.stop }
+          browser
+        end
+
+        def with_html_page(driver, &blk)
+          Tempfile.create(['capybara-screenshot', '.html']) do |tempfile|
+            page_path = tempfile.path
+            html = Capybara::Helpers.inject_asset_host(driver.html, host: Capybara.asset_host)
+            File.write(page_path, html, mode: 'wb')
+
+            yield page_path
+          end
+        end
+
+        def playwright_cli_executable_path
+          ENV['PLAYWRIGHT_CLI_EXE_PATH'] || 'npx playwright'
+        end
+
+        def ensure_asset_host!
+          if Capybara.asset_host.nil?
+            raise <<~ERR
+              Please configure Capybara.asset_host to point to a server where the
+              assets can be found. This is necessary to generate a screenshot.
+
+              Example:
+
+              Capybara.asset_host = 'http://localhost:3000'
+
+              or
+
+              Capybara.configure do |config|
+                config.asset_host = 'http://localhost:3000'
+              end
+            ERR
+          end
+        end
+      end
+
+      self.default_viewport = { width: 1400, height: 1400 }
+      self.browser_semaphore = Mutex.new
+    end
+  end
+end
+
+class Capybara::RackTest::Driver < Capybara::Driver::Base
+  def save_screenshot(path, **options)
+    Capybara::RackTest::Screenshot.save_screenshot(path, self, **options)
+  end
+end
+
+if defined?(Rails)
+  require_relative 'screenshot/railtie'
+end

data/sig/capybara/rack_test/screenshot.rbs

@@ -0,0 +1,8 @@
+module Capybara
+  module RackTest
+    module Screenshot
+      VERSION: String
+      # See the writing guide of rbs: https://github.com/ruby/rbs#guides
+    end
+  end
+end

metadata

@@ -0,0 +1,85 @@
+--- !ruby/object:Gem::Specification
+name: capybara-rack_test-screenshot
+version: !ruby/object:Gem::Version
+  version: 0.1.0
+platform: ruby
+authors:
+- Theodor Tonum
+autorequire:
+bindir: bin
+cert_chain: []
+date: 2024-03-14 00:00:00.000000000 Z
+dependencies:
+- !ruby/object:Gem::Dependency
+  name: capybara
+  requirement: !ruby/object:Gem::Requirement
+    requirements:
+    - - "~>"
+      - !ruby/object:Gem::Version
+        version: '3.0'
+  type: :runtime
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    requirements:
+    - - "~>"
+      - !ruby/object:Gem::Version
+        version: '3.0'
+- !ruby/object:Gem::Dependency
+  name: playwright-ruby-client
+  requirement: !ruby/object:Gem::Requirement
+    requirements:
+    - - "~>"
+      - !ruby/object:Gem::Version
+        version: '1.16'
+  type: :runtime
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    requirements:
+    - - "~>"
+      - !ruby/object:Gem::Version
+        version: '1.16'
+description: Use playwright to generate screenshots when using RackTest
+email:
+- theodor@tonum.no
+executables: []
+extensions: []
+extra_rdoc_files: []
+files:
+- ".rspec"
+- CHANGELOG.md
+- CODE_OF_CONDUCT.md
+- LICENSE.txt
+- README.md
+- Rakefile
+- lib/capybara/rack_test/screenshot.rb
+- lib/capybara/rack_test/screenshot/railtie.rb
+- lib/capybara/rack_test/screenshot/version.rb
+- sig/capybara/rack_test/screenshot.rbs
+homepage: https://github.com/theodorton/capybara-rack_test-screenshot
+licenses:
+- MIT
+metadata:
+  allowed_push_host: https://rubygems.org
+  homepage_uri: https://github.com/theodorton/capybara-rack_test-screenshot
+  source_code_uri: https://github.com/theodorton/capybara-rack_test-screenshot
+  changelog_uri: https://github.com/theodorton/capybara-rack_test-screenshot/blob/main/CHANGELOG.md
+post_install_message:
+rdoc_options: []
+require_paths:
+- lib
+required_ruby_version: !ruby/object:Gem::Requirement
+  requirements:
+  - - ">="
+    - !ruby/object:Gem::Version
+      version: 3.0.0
+required_rubygems_version: !ruby/object:Gem::Requirement
+  requirements:
+  - - ">="
+    - !ruby/object:Gem::Version
+      version: '0'
+requirements: []
+rubygems_version: 3.4.19
+signing_key:
+specification_version: 4
+summary: Screenshots for RackTest
+test_files: []