aws-sdk-support 1.16.0 → 1.17.0

checksums.yaml

@@ -1,7 +1,7 @@
 ---
 SHA1:
-  metadata.gz: 8b1819e70c0f873da834fe631765f31f8f0d42a7
-  data.tar.gz: f6ea8b1b5b16fde03b1a2b90662f38af249777c1
+  metadata.gz: 1d906fefaa7dcfc2f17c2e0f0b9cd980c4c391a1
+  data.tar.gz: 8f8548802aa737b18e6d807880d9441156047356
 SHA512:
-  metadata.gz: 43fa7be74496a702c85ab3199a210dd89536577a1058c0bc0c139796b220b8b918336568e3a80bbbaa140a4a98c061be457631101b535d2a7f7c115916806e8b
-  data.tar.gz: ee4459f71018d12c2ace0a78bbacdd1520f55e0c389d8eaeabca51028a04e0f3b5ea3007a2a6f555f538a6b184a0219c7cdb24a3f38d30d692428fbd32753220
+  metadata.gz: 99ee66d841bade7d9c739e31ca186ca2ac03f65d137ccb3612ae1a75d6b97921f618c647f6c4948519d3da43450e4efdcdd51a824c2960160c69f2333f754db6
+  data.tar.gz: ba19f60a2a73481a984b406b82b5a70a480067427fe753467b9051542d41cb2eb79dc413db67a71ed2ed1a3bfef612b9e65233c45807a0b05e3d0621eecce13e

data/lib/aws-sdk-support.rb

@@ -42,6 +42,6 @@ require_relative 'aws-sdk-support/customizations'
 # @service
 module Aws::Support
 
-  GEM_VERSION = '1.16.0'
+  GEM_VERSION = '1.17.0'
 
 end

data/lib/aws-sdk-support/client.rb

@@ -378,18 +378,29 @@ module Aws::Support
     #   either "customer-service" or "technical." If you do not indicate
     #   a value, the default is "technical."
     #
-    # * **serviceCode.** The code for an AWS service. You obtain the
-    #   `serviceCode` by calling DescribeServices.
+    #   <note markdown="1"> Service limit increases are not supported by the Support API; you
+    #   must submit service limit increase requests in [Support Center][2].
+    #
+    #    The `caseId` is not the `displayId` that appears in [Support
+    #   Center][2]. You can use the DescribeCases API to get the
+    #   `displayId`.
+    #
+    #    </note>
+    #
+    # * **serviceCode.** The code for an AWS service. You can get the
+    #   possible `serviceCode` values by calling DescribeServices.
     #
     # * **categoryCode.** The category for the service defined for the
-    #   `serviceCode` value. You also obtain the category code for a service
-    #   by calling DescribeServices. Each AWS service defines its own set of
+    #   `serviceCode` value. You also get the category code for a service by
+    #   calling DescribeServices. Each AWS service defines its own set of
     #   category codes.
     #
     # * **severityCode.** A value that indicates the urgency of the case,
     #   which in turn determines the response time according to your service
-    #   level agreement with AWS Support. You obtain the SeverityCode by
-    #   calling DescribeSeverityLevels.
+    #   level agreement with AWS Support. You can get the possible
+    #   `severityCode` values by calling DescribeSeverityLevels. For more
+    #   information about the meaning of the codes, see SeverityLevel and
+    #   [Choosing a Severity][3].
     #
     # * **subject.** The **Subject** field on the AWS Support Center [Create
     #   Case][1] page.
@@ -408,7 +419,7 @@ module Aws::Support
     #   any correspondence about the case. The account that opens the case
     #   is already identified by passing the AWS Credentials in the HTTP
     #   POST method or in a method or function call from one of the
-    #   programming languages supported by an [AWS SDK][2].
+    #   programming languages supported by an [AWS SDK][4].
     #
     # <note markdown="1"> To add additional communication or attachments to an existing case,
     # use AddCommunicationToCase.
@@ -422,7 +433,9 @@ module Aws::Support
     #
     #
     # [1]: https://console.aws.amazon.com/support/home#/case/create
-    # [2]: http://aws.amazon.com/tools/
+    # [2]: https://console.aws.amazon.com/support
+    # [3]: https://docs.aws.amazon.com/awssupport/latest/user/getting-started.html#choosing-severity
+    # [4]: http://aws.amazon.com/tools/
     #
     # @option params [required, String] :subject
     #   The title of the AWS Support case.
@@ -434,9 +447,8 @@ module Aws::Support
     #   The code for the severity level returned by the call to
     #   DescribeSeverityLevels.
     #
-    #   <note markdown="1"> The availability of severity levels depends on each customer's
-    #   support subscription. In other words, your subscription may not
-    #   necessarily require the urgent level of response time.
+    #   <note markdown="1"> The availability of severity levels depends on the support plan for
+    #   the account.
     #
     #    </note>
     #
@@ -462,6 +474,15 @@ module Aws::Support
     #   "customer-service" or "technical." If you do not indicate a value,
     #   the default is "technical."
     #
+    #   <note markdown="1"> Service limit increases are not supported by the Support API; you must
+    #   submit service limit increase requests in [Support Center][1].
+    #
+    #    </note>
+    #
+    #
+    #
+    #   [1]: https://console.aws.amazon.com/support
+    #
     # @option params [String] :attachment_set_id
     #   The ID of a set of one or more attachments for the case. Create the
     #   set by using AddAttachmentsToSet.
@@ -959,7 +980,8 @@ module Aws::Support
     # including name, ID, category, description, and metadata. You must
     # specify a language code; English ("en") and Japanese ("ja") are
     # currently supported. The response contains a
-    # TrustedAdvisorCheckDescription for each check.
+    # TrustedAdvisorCheckDescription for each check. The region must be set
+    # to us-east-1.
     #
     # @option params [required, String] :language
     #   The ISO 639-1 code for the language in which AWS provides support. AWS
@@ -1009,8 +1031,20 @@ module Aws::Support
     # The response contains a TrustedAdvisorCheckRefreshStatus object, which
     # contains these fields:
     #
-    # * **status.** The refresh status of the check: "none", "enqueued",
-    #   "processing", "success", or "abandoned".
+    # * **status.** The refresh status of the check:
+    #
+    #   * `none:` The check is not refreshed or the non-success status
+    #     exceeds the timeout
+    #
+    #   * `enqueued:` The check refresh requests has entered the refresh
+    #     queue
+    #
+    #   * `processing:` The check refresh request is picked up by the rule
+    #     processing engine
+    #
+    #   * `success:` The check is successfully refreshed
+    #
+    #   * `abandoned:` The check refresh has failed
     #
     # * **millisUntilNextRefreshable.** The amount of time, in milliseconds,
     #   until the check is eligible for refresh.
@@ -1093,7 +1127,7 @@ module Aws::Support
         params: params,
         config: config)
       context[:gem_name] = 'aws-sdk-support'
-      context[:gem_version] = '1.16.0'
+      context[:gem_version] = '1.17.0'
       Seahorse::Client::Request.new(handlers, context)
     end
 

data/lib/aws-sdk-support/client_api.rb

@@ -392,6 +392,7 @@ module Aws::Support
         "jsonVersion" => "1.1",
         "protocol" => "json",
         "serviceFullName" => "AWS Support",
+        "serviceId" => "Support",
         "signatureVersion" => "v4",
         "targetPrefix" => "AWSSupport_20130415",
         "uid" => "support-2013-04-15",

data/lib/aws-sdk-support/types.rb

@@ -280,11 +280,14 @@ module Aws::Support
     # * **serviceCode.** The identifier for the AWS service that corresponds
     #   to the service code defined in the call to DescribeServices.
     #
-    # * <b>severityCode. </b>The severity code assigned to the case.
-    #   Contains one of the values returned by the call to
-    #   DescribeSeverityLevels.
+    # * **severityCode.** The severity code assigned to the case. Contains
+    #   one of the values returned by the call to DescribeSeverityLevels.
+    #   The possible values are: `low`, `normal`, `high`, `urgent`, and
+    #   `critical`.
     #
-    # * **status.** The status of the case in the AWS Support Center.
+    # * **status.** The status of the case in the AWS Support Center. The
+    #   possible values are: `resolved`, `pending-customer-action`,
+    #   `opened`, `unassigned`, and `work-in-progress`.
     #
     # * **subject.** The subject line of the case.
     #
@@ -309,12 +312,14 @@ module Aws::Support
     #   @return [String]
     #
     # @!attribute [rw] status
-    #   The status of the case.
+    #   The status of the case. Valid values: `resolved` \|
+    #   `pending-customer-action` \| `opened` \| `unassigned` \|
+    #   `work-in-progress`.
     #   @return [String]
     #
     # @!attribute [rw] service_code
-    #   The code for the AWS service returned by the call to
-    #   DescribeServices.
+    #   The code for the AWS service. You can get a list of codes and the
+    #   corresponding service names by calling DescribeServices.
     #   @return [String]
     #
     # @!attribute [rw] category_code
@@ -406,7 +411,8 @@ module Aws::Support
 
     # A communication associated with an AWS Support case. The communication
     # consists of the case ID, the message body, attachment information, the
-    # account email address, and the date and time of the communication.
+    # submitter of the communication, and the date and time of the
+    # communication.
     #
     # @!attribute [rw] case_id
     #   The AWS Support case ID requested or returned in the call. The case
@@ -419,8 +425,11 @@ module Aws::Support
     #   @return [String]
     #
     # @!attribute [rw] submitted_by
-    #   The email address of the account that submitted the AWS Support
-    #   case.
+    #   The identity of the account that submitted, or responded to, the
+    #   support case. Customer entries include the role or IAM user as well
+    #   as the email address. For example, "AdminRole (Role)
+    #   &lt;someone@example.com&gt;. Entries from the AWS Support team
+    #   display "Amazon Web Services," and do not show an email address.
     #   @return [String]
     #
     # @!attribute [rw] time_created
@@ -470,9 +479,8 @@ module Aws::Support
     #   The code for the severity level returned by the call to
     #   DescribeSeverityLevels.
     #
-    #   <note markdown="1"> The availability of severity levels depends on each customer's
-    #   support subscription. In other words, your subscription may not
-    #   necessarily require the urgent level of response time.
+    #   <note markdown="1"> The availability of severity levels depends on the support plan for
+    #   the account.
     #
     #    </note>
     #   @return [String]
@@ -502,6 +510,15 @@ module Aws::Support
     #   The type of issue for the case. You can specify either
     #   "customer-service" or "technical." If you do not indicate a
     #   value, the default is "technical."
+    #
+    #   <note markdown="1"> Service limit increases are not supported by the Support API; you
+    #   must submit service limit increase requests in [Support Center][1].
+    #
+    #    </note>
+    #
+    #
+    #
+    #   [1]: https://console.aws.amazon.com/support
     #   @return [String]
     #
     # @!attribute [rw] attachment_set_id
@@ -1102,18 +1119,47 @@ module Aws::Support
       include Aws::Structure
     end
 
-    # A code and name pair that represent a severity level that can be
-    # applied to a support case.
+    # A code and name pair that represents the severity level of a support
+    # case. The available values depend on the support plan for the account.
+    # For more information, see [Choosing a Severity][1].
+    #
+    #
+    #
+    # [1]: https://docs.aws.amazon.com/awssupport/latest/user/getting-started.html#choosing-severity
     #
     # @!attribute [rw] code
-    #   One of four values: "low," "medium," "high," and "urgent".
-    #   These values correspond to response times returned to the caller in
-    #   `severityLevel.name`.
+    #   The code for case severity level.
+    #
+    #   Valid values: `low` \| `normal` \| `high` \| `urgent` \| `critical`
     #   @return [String]
     #
     # @!attribute [rw] name
     #   The name of the severity level that corresponds to the severity
     #   level code.
+    #
+    #   <note markdown="1"> The values returned by the API differ from the values that are
+    #   displayed in the AWS Support Center. For example, for the code
+    #   "low", the API name is "Low", but the name in the Support Center
+    #   is "General guidance". These are the Support Center code/name
+    #   mappings:
+    #
+    #    * `low`\: General guidance
+    #
+    #   * `normal`\: System impaired
+    #
+    #   * `high`\: Production system impaired
+    #
+    #   * `urgent`\: Production system down
+    #
+    #   * `critical`\: Business-critical system down
+    #
+    #    </note>
+    #
+    #   For more information, see [Choosing a Severity][1]
+    #
+    #
+    #
+    #   [1]: https://docs.aws.amazon.com/awssupport/latest/user/getting-started.html#choosing-severity
     #   @return [String]
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/support-2013-04-15/SeverityLevel AWS API Documentation
@@ -1186,8 +1232,20 @@ module Aws::Support
     #
     # @!attribute [rw] status
     #   The status of the Trusted Advisor check for which a refresh has been
-    #   requested: "none", "enqueued", "processing", "success", or
-    #   "abandoned".
+    #   requested:
+    #
+    #   * `none:` The check is not refreshed or the non-success status
+    #     exceeds the timeout
+    #
+    #   * `enqueued:` The check refresh requests has entered the refresh
+    #     queue
+    #
+    #   * `processing:` The check refresh request is picked up by the rule
+    #     processing engine
+    #
+    #   * `success:` The check is successfully refreshed
+    #
+    #   * `abandoned:` The check refresh has failed
     #   @return [String]
     #
     # @!attribute [rw] millis_until_next_refreshable

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: aws-sdk-support
 version: !ruby/object:Gem::Version
-  version: 1.16.0
+  version: 1.17.0
 platform: ruby
 authors:
 - Amazon Web Services
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2019-10-23 00:00:00.000000000 Z
+date: 2019-10-31 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: aws-sdk-core