aws-sdk-qldbsession 1.2.0 → 1.3.0

checksums.yaml

@@ -1,7 +1,7 @@
 ---
-SHA1:
-  metadata.gz: 9d85ed0aec9fab2f5258bde4085613110ef16167
-  data.tar.gz: bc38510393573ebc61a935a0d0a66f1f80556500
+SHA256:
+  metadata.gz: 49caa84de01c0e16af1569c605e0fdd54bc3f00fe4e861bfe123d32a2580fbe6
+  data.tar.gz: 77a11bfe8c2b39ec253a7ad6654bdbd2b55016d9c1275d77a09fd52d92fb3f77
 SHA512:
-  metadata.gz: 8a852895fa3a55758f3ea430c3fe891d5948194ef7c8e3eb93dbf84ec0fb62d63159c82708354473f376748152b26779d5dd41d5aadc0f5a7ddb4f43d03fc5c3
-  data.tar.gz: 2d4df652ac148dfdb127eee1b81129cfc576923c4856d85ede134158f96e3f95f66edbc751e4a421f44f5e5fabc363f9762c46e49918f9601372af822d14bfbc
+  metadata.gz: 49c4e996d29378b35fec8587b52e1d71f4bc0aaad4cee70d7bfbb3afb46699a8d92308b6fff8863d438444e0ba15f74c829730ff2aab3ea2b40efd926696dc97
+  data.tar.gz: af8858463e5bcfa5fcadffab82f0578a733cf08ffe1d27f36d0dda99a3156a9224cf67d0c257fa7b064623e016705ac84c1274af4c418443e1160f0d8b369186

data/lib/aws-sdk-qldbsession.rb

@@ -45,6 +45,6 @@ require_relative 'aws-sdk-qldbsession/customizations'
 # @service
 module Aws::QLDBSession
 
-  GEM_VERSION = '1.2.0'
+  GEM_VERSION = '1.3.0'
 
 end

data/lib/aws-sdk-qldbsession/client.rb

@@ -32,11 +32,11 @@ Aws::Plugins::GlobalConfiguration.add_identifier(:qldbsession)
 module Aws::QLDBSession
   # An API client for QLDBSession.  To construct a client, you need to configure a `:region` and `:credentials`.
   #
-  #   client = Aws::QLDBSession::Client.new(
-  #     region: region_name,
-  #     credentials: credentials,
-  #     # ...
-  #   )
+  #     client = Aws::QLDBSession::Client.new(
+  #       region: region_name,
+  #       credentials: credentials,
+  #       # ...
+  #     )
   #
   # For details on configuring region and credentials see
   # the [developer guide](/sdk-for-ruby/v3/developer-guide/setup-config.html).
@@ -105,7 +105,7 @@ module Aws::QLDBSession
     #   @option options [required, String] :region
     #     The AWS region to connect to.  The configured `:region` is
     #     used to determine the service `:endpoint`. When not passed,
-    #     a default `:region` is search for in the following locations:
+    #     a default `:region` is searched for in the following locations:
     #
     #     * `Aws.config[:region]`
     #     * `ENV['AWS_REGION']`
@@ -161,7 +161,7 @@ module Aws::QLDBSession
     #   @option options [String] :endpoint
     #     The client endpoint is normally constructed from the `:region`
     #     option. You should only configure an `:endpoint` when connecting
-    #     to test endpoints. This should be avalid HTTP(S) URI.
+    #     to test endpoints. This should be a valid HTTP(S) URI.
     #
     #   @option options [Integer] :endpoint_cache_max_entries (1000)
     #     Used for the maximum size limit of the LRU cache storing endpoints data
@@ -229,15 +229,19 @@ module Aws::QLDBSession
     #
     #   @option options [String] :retry_mode ("legacy")
     #     Specifies which retry algorithm to use. Values are:
-    #       * `legacy` - The pre-existing retry behavior.  This is default value if
-    #         no retry mode is provided.
-    #       * `standard` - A standardized set of retry rules across the AWS SDKs.
-    #         This includes support for retry quotas, which limit the number of
-    #         unsuccessful retries a client can make.
-    #       * `adaptive` - An experimental retry mode that includes all the
-    #         functionality of `standard` mode along with automatic client side
-    #         throttling.  This is a provisional mode that may change behavior
-    #         in the future.
+    #
+    #     * `legacy` - The pre-existing retry behavior.  This is default value if
+    #       no retry mode is provided.
+    #
+    #     * `standard` - A standardized set of retry rules across the AWS SDKs.
+    #       This includes support for retry quotas, which limit the number of
+    #       unsuccessful retries a client can make.
+    #
+    #     * `adaptive` - An experimental retry mode that includes all the
+    #       functionality of `standard` mode along with automatic client side
+    #       throttling.  This is a provisional mode that may change behavior
+    #       in the future.
+    #
     #
     #   @option options [String] :secret_access_key
     #
@@ -275,8 +279,7 @@ module Aws::QLDBSession
     #
     #   @option options [Integer] :http_read_timeout (60) The default
     #     number of seconds to wait for response data.  This value can
-    #     safely be set
-    #     per-request on the session yielded by {#session_for}.
+    #     safely be set per-request on the session.
     #
     #   @option options [Float] :http_idle_timeout (5) The number of
     #     seconds a connection is allowed to sit idle before it is
@@ -288,7 +291,7 @@ module Aws::QLDBSession
     #     request body.  This option has no effect unless the request has
     #     "Expect" header set to "100-continue".  Defaults to `nil` which
     #     disables this behaviour.  This value can safely be set per
-    #     request on the session yielded by {#session_for}.
+    #     request on the session.
     #
     #   @option options [Boolean] :http_wire_trace (false) When `true`,
     #     HTTP debug output will be sent to the `:logger`.
@@ -427,7 +430,7 @@ module Aws::QLDBSession
         params: params,
         config: config)
       context[:gem_name] = 'aws-sdk-qldbsession'
-      context[:gem_version] = '1.2.0'
+      context[:gem_version] = '1.3.0'
       Seahorse::Client::Request.new(handlers, context)
     end
 

data/lib/aws-sdk-qldbsession/resource.rb

@@ -6,13 +6,7 @@
 # WARNING ABOUT GENERATED CODE
 
 module Aws::QLDBSession
-  # This class provides a resource oriented interface for QLDBSession.
-  # To create a resource object:
-  #     resource = Aws::QLDBSession::Resource.new(region: 'us-west-2')
-  # You can supply a client object with custom configuration that will be used for all resource operations.
-  # If you do not pass +:client+, a default client will be constructed.
-  #     client = Aws::QLDBSession::Client.new(region: 'us-west-2')
-  #     resource = Aws::QLDBSession::Resource.new(client: client)
+
   class Resource
 
     # @param options ({})

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: aws-sdk-qldbsession
 version: !ruby/object:Gem::Version
-  version: 1.2.0
+  version: 1.3.0
 platform: ruby
 authors:
 - Amazon Web Services
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2020-03-09 00:00:00.000000000 Z
+date: 2020-05-07 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: aws-sdk-core
@@ -81,7 +81,7 @@ required_rubygems_version: !ruby/object:Gem::Requirement
       version: '0'
 requirements: []
 rubyforge_project: 
-rubygems_version: 2.5.2.3
+rubygems_version: 2.7.6.2
 signing_key: 
 specification_version: 4
 summary: AWS SDK for Ruby - QLDB Session