aws-sdk-pi 1.17.0 → 1.18.0

checksums.yaml

@@ -1,7 +1,7 @@
 ---
-SHA1:
-  metadata.gz: c87512c74237b0392a51205564415646e4aa67c9
-  data.tar.gz: d1d1e4185ff279b05d74ebd909bbfbbea5133fa6
+SHA256:
+  metadata.gz: 1407287fba494a11a0a76e6fa8e7fb213326cf587b6a384d9b1b9f733e66129b
+  data.tar.gz: cba2a50222327f2d7d5c148ac86e404926cbf680c5651929ee4715727ae8fd49
 SHA512:
-  metadata.gz: '08b82bd7748c1132a8e2f9b61e39116f19b8a1a3032d15f6180bee37948a02f1eac99856cb3fe2e7b77693b2a190da8d378300346c3bbb49e958bc1cdde13429'
-  data.tar.gz: 4bfdc4a87c893ccea41e05ff30e2579fefef80039936432f14a842e85d6fcc83cdf27be973fa9bfdb1c4d93b8241e579d32dbc5998e69908f3db226e7b753467
+  metadata.gz: 706bd7b56bb9c3ca5fdf333be3d44614c97bef773e0db3c53fb1ca01ae22c80a1c8b03c296410c571fade83f5705231193850f0f36078e372314c029133acd4c
+  data.tar.gz: f852b5ed1142a59376f11b58a0157e9450cd39369ef4c5bfee19a33232ef57f90775d8198ddd85c5fe37abd102d06e08cb8cd3f864335b0ff2da3b79052a3733

data/lib/aws-sdk-pi.rb

@@ -45,6 +45,6 @@ require_relative 'aws-sdk-pi/customizations'
 # @service
 module Aws::PI
 
-  GEM_VERSION = '1.17.0'
+  GEM_VERSION = '1.18.0'
 
 end

data/lib/aws-sdk-pi/client.rb

@@ -32,11 +32,11 @@ Aws::Plugins::GlobalConfiguration.add_identifier(:pi)
 module Aws::PI
   # An API client for PI.  To construct a client, you need to configure a `:region` and `:credentials`.
   #
-  #   client = Aws::PI::Client.new(
-  #     region: region_name,
-  #     credentials: credentials,
-  #     # ...
-  #   )
+  #     client = Aws::PI::Client.new(
+  #       region: region_name,
+  #       credentials: credentials,
+  #       # ...
+  #     )
   #
   # For details on configuring region and credentials see
   # the [developer guide](/sdk-for-ruby/v3/developer-guide/setup-config.html).
@@ -105,7 +105,7 @@ module Aws::PI
     #   @option options [required, String] :region
     #     The AWS region to connect to.  The configured `:region` is
     #     used to determine the service `:endpoint`. When not passed,
-    #     a default `:region` is search for in the following locations:
+    #     a default `:region` is searched for in the following locations:
     #
     #     * `Aws.config[:region]`
     #     * `ENV['AWS_REGION']`
@@ -161,7 +161,7 @@ module Aws::PI
     #   @option options [String] :endpoint
     #     The client endpoint is normally constructed from the `:region`
     #     option. You should only configure an `:endpoint` when connecting
-    #     to test endpoints. This should be avalid HTTP(S) URI.
+    #     to test endpoints. This should be a valid HTTP(S) URI.
     #
     #   @option options [Integer] :endpoint_cache_max_entries (1000)
     #     Used for the maximum size limit of the LRU cache storing endpoints data
@@ -229,15 +229,19 @@ module Aws::PI
     #
     #   @option options [String] :retry_mode ("legacy")
     #     Specifies which retry algorithm to use. Values are:
-    #       * `legacy` - The pre-existing retry behavior.  This is default value if
-    #         no retry mode is provided.
-    #       * `standard` - A standardized set of retry rules across the AWS SDKs.
-    #         This includes support for retry quotas, which limit the number of
-    #         unsuccessful retries a client can make.
-    #       * `adaptive` - An experimental retry mode that includes all the
-    #         functionality of `standard` mode along with automatic client side
-    #         throttling.  This is a provisional mode that may change behavior
-    #         in the future.
+    #
+    #     * `legacy` - The pre-existing retry behavior.  This is default value if
+    #       no retry mode is provided.
+    #
+    #     * `standard` - A standardized set of retry rules across the AWS SDKs.
+    #       This includes support for retry quotas, which limit the number of
+    #       unsuccessful retries a client can make.
+    #
+    #     * `adaptive` - An experimental retry mode that includes all the
+    #       functionality of `standard` mode along with automatic client side
+    #       throttling.  This is a provisional mode that may change behavior
+    #       in the future.
+    #
     #
     #   @option options [String] :secret_access_key
     #
@@ -275,8 +279,7 @@ module Aws::PI
     #
     #   @option options [Integer] :http_read_timeout (60) The default
     #     number of seconds to wait for response data.  This value can
-    #     safely be set
-    #     per-request on the session yielded by {#session_for}.
+    #     safely be set per-request on the session.
     #
     #   @option options [Float] :http_idle_timeout (5) The number of
     #     seconds a connection is allowed to sit idle before it is
@@ -288,7 +291,7 @@ module Aws::PI
     #     request body.  This option has no effect unless the request has
     #     "Expect" header set to "100-continue".  Defaults to `nil` which
     #     disables this behaviour.  This value can safely be set per
-    #     request on the session yielded by {#session_for}.
+    #     request on the session.
     #
     #   @option options [Boolean] :http_wire_trace (false) When `true`,
     #     HTTP debug output will be sent to the `:logger`.
@@ -600,7 +603,7 @@ module Aws::PI
         params: params,
         config: config)
       context[:gem_name] = 'aws-sdk-pi'
-      context[:gem_version] = '1.17.0'
+      context[:gem_version] = '1.18.0'
       Seahorse::Client::Request.new(handlers, context)
     end
 

data/lib/aws-sdk-pi/resource.rb

@@ -6,13 +6,7 @@
 # WARNING ABOUT GENERATED CODE
 
 module Aws::PI
-  # This class provides a resource oriented interface for PI.
-  # To create a resource object:
-  #     resource = Aws::PI::Resource.new(region: 'us-west-2')
-  # You can supply a client object with custom configuration that will be used for all resource operations.
-  # If you do not pass +:client+, a default client will be constructed.
-  #     client = Aws::PI::Client.new(region: 'us-west-2')
-  #     resource = Aws::PI::Resource.new(client: client)
+
   class Resource
 
     # @param options ({})

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: aws-sdk-pi
 version: !ruby/object:Gem::Version
-  version: 1.17.0
+  version: 1.18.0
 platform: ruby
 authors:
 - Amazon Web Services
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2020-03-09 00:00:00.000000000 Z
+date: 2020-05-07 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: aws-sdk-core
@@ -81,7 +81,7 @@ required_rubygems_version: !ruby/object:Gem::Requirement
       version: '0'
 requirements: []
 rubyforge_project: 
-rubygems_version: 2.5.2.3
+rubygems_version: 2.7.6.2
 signing_key: 
 specification_version: 4
 summary: AWS SDK for Ruby - AWS PI