aws-sdk-dynamodb 1.3.0 → 1.4.0

checksums.yaml

@@ -1,7 +1,7 @@
 ---
 SHA1:
-  metadata.gz: c297fd9c2cba62284e16a8037c25c2a707254b35
-  data.tar.gz: fd20ab0c77b14576086037e986d57a9aa494169e
+  metadata.gz: dfb22b56fccb5b34528350e2f125f37cc418cd9d
+  data.tar.gz: 8896252fc86aee9475d84a6c9cce3f4d3e459375
 SHA512:
-  metadata.gz: f44bfdd581a8983b9b7ffcdf04b6b03d98401a1c36942aaf1c59d136c3b6395b3a0a764268717aef6669988d8946226b413ebbe88334c48b7c999c9bdf42ab50
-  data.tar.gz: b52d8a140664fa5de5bafe6349318edb9052d06b1a56c8017d812601f5cf99708e24e592ff28296ae591db98ff2e02a7c216a6999541e82e7c0a28b343d35c86
+  metadata.gz: 07c741b8b9b4b53a0072e7d4fc61e698c6e5905cccbb0528bc76de3f3c07468120fd246dd192f6103b37320152aaaa3c3afefa551dd632481177db4a087f38b2
+  data.tar.gz: 3167ff87b108ce2e5498f46dcd18ed5f40c7ec531043dac0644325373336b0141d98574385961e9d294b7b9a9281a0558a09e739be3031ddd8491a8df375a894

data/lib/aws-sdk-dynamodb.rb

@@ -44,6 +44,6 @@ require_relative 'aws-sdk-dynamodb/customizations'
 # @service
 module Aws::DynamoDB
 
-  GEM_VERSION = '1.3.0'
+  GEM_VERSION = '1.4.0'
 
 end

data/lib/aws-sdk-dynamodb/client.rb

@@ -738,25 +738,22 @@ module Aws::DynamoDB
     # backed up. There is no limit to the number of on-demand backups that
     # can be taken.
     #
+    # When you create an On-Demand Backup, a time marker of the request is
+    # cataloged, and the backup is created asynchronously, by applying all
+    # changes until the time of the request to the last full table snapshot.
+    # Backup requests are processed instantaneously and become available for
+    # restore within minutes.
+    #
     # You can call `CreateBackup` at a maximum rate of 50 times per second.
     #
     # All backups in DynamoDB work without consuming any provisioned
-    # throughput on the table. This results in a fast, low-cost, and
-    # scalable backup process. In general, the larger the table, the more
-    # time it takes to back up. The backup is stored in an S3 data store
-    # that is maintained and managed by DynamoDB.
-    #
-    # Backups incorporate all writes (delete, put, update) that were
-    # completed within the last minute before the backup request was
-    # initiated. Backups might include some writes (delete, put, update)
-    # that were completed before the backup request was finished.
-    #
-    # For example, if you submit the backup request on 2018-12-14 at
-    # 14:25:00, the backup is guaranteed to contain all data committed to
-    # the table up to 14:24:00, and data committed after 14:26:00 will not
-    # be. The backup may or may not contain data modifications made between
-    # 14:24:00 and 14:26:00. On-Demand Backup does not support causal
-    # consistency.
+    # throughput on the table.
+    #
+    # If you submit a backup request on 2018-12-14 at 14:25:00, the backup
+    # is guaranteed to contain all data committed to the table up to
+    # 14:24:00, and data committed after 14:26:00 will not be. The backup
+    # may or may not contain data modifications made between 14:24:00 and
+    # 14:26:00. On-Demand Backup does not support causal consistency.
     #
     # Along with data, the following are also included on the backups:
     #
@@ -1044,6 +1041,9 @@ module Aws::DynamoDB
     #     * `NEW_AND_OLD_IMAGES` - Both the new and the old item images of the
     #       item are written to the stream.
     #
+    # @option params [Types::SSESpecification] :sse_specification
+    #   Represents the settings used to enable server-side encryption.
+    #
     # @return [Types::CreateTableOutput] Returns a {Seahorse::Client::Response response} object which responds to the following methods:
     #
     #   * {Types::CreateTableOutput#table_description #table_description} => Types::TableDescription
@@ -1174,6 +1174,9 @@ module Aws::DynamoDB
     #       stream_enabled: false,
     #       stream_view_type: "NEW_IMAGE", # accepts NEW_IMAGE, OLD_IMAGE, NEW_AND_OLD_IMAGES, KEYS_ONLY
     #     },
+    #     sse_specification: {
+    #       enabled: false, # required
+    #     },
     #   })
     #
     # @example Response structure
@@ -1233,6 +1236,7 @@ module Aws::DynamoDB
     #   resp.table_description.restore_summary.source_table_arn #=> String
     #   resp.table_description.restore_summary.restore_date_time #=> Time
     #   resp.table_description.restore_summary.restore_in_progress #=> Boolean
+    #   resp.table_description.sse_description.status #=> String, one of "ENABLING", "ENABLED", "DISABLING", "DISABLED"
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/CreateTable AWS API Documentation
     #
@@ -1300,6 +1304,7 @@ module Aws::DynamoDB
     #   resp.backup_description.source_table_feature_details.stream_description.stream_view_type #=> String, one of "NEW_IMAGE", "OLD_IMAGE", "NEW_AND_OLD_IMAGES", "KEYS_ONLY"
     #   resp.backup_description.source_table_feature_details.time_to_live_description.time_to_live_status #=> String, one of "ENABLING", "DISABLING", "ENABLED", "DISABLED"
     #   resp.backup_description.source_table_feature_details.time_to_live_description.attribute_name #=> String
+    #   resp.backup_description.source_table_feature_details.sse_description.status #=> String, one of "ENABLING", "ENABLED", "DISABLING", "DISABLED"
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DeleteBackup AWS API Documentation
     #
@@ -1696,6 +1701,7 @@ module Aws::DynamoDB
     #   resp.table_description.restore_summary.source_table_arn #=> String
     #   resp.table_description.restore_summary.restore_date_time #=> Time
     #   resp.table_description.restore_summary.restore_in_progress #=> Boolean
+    #   resp.table_description.sse_description.status #=> String, one of "ENABLING", "ENABLED", "DISABLING", "DISABLED"
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DeleteTable AWS API Documentation
     #
@@ -1764,6 +1770,7 @@ module Aws::DynamoDB
     #   resp.backup_description.source_table_feature_details.stream_description.stream_view_type #=> String, one of "NEW_IMAGE", "OLD_IMAGE", "NEW_AND_OLD_IMAGES", "KEYS_ONLY"
     #   resp.backup_description.source_table_feature_details.time_to_live_description.time_to_live_status #=> String, one of "ENABLING", "DISABLING", "ENABLED", "DISABLED"
     #   resp.backup_description.source_table_feature_details.time_to_live_description.attribute_name #=> String
+    #   resp.backup_description.source_table_feature_details.sse_description.status #=> String, one of "ENABLING", "ENABLED", "DISABLING", "DISABLED"
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeBackup AWS API Documentation
     #
@@ -1808,7 +1815,7 @@ module Aws::DynamoDB
       req.send_request(options)
     end
 
-    # Returns information about the global table.
+    # Returns information about the specified global table.
     #
     # @option params [required, String] :global_table_name
     #   The name of the global table.
@@ -2078,6 +2085,7 @@ module Aws::DynamoDB
     #   resp.table.restore_summary.source_table_arn #=> String
     #   resp.table.restore_summary.restore_date_time #=> Time
     #   resp.table.restore_summary.restore_in_progress #=> Boolean
+    #   resp.table.sse_description.status #=> String, one of "ENABLING", "ENABLED", "DISABLING", "DISABLED"
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/DescribeTable AWS API Documentation
     #
@@ -2381,8 +2389,7 @@ module Aws::DynamoDB
       req.send_request(options)
     end
 
-    # Lists all the global tables. Only those global tables that have
-    # replicas in the region specified as input are returned.
+    # Lists all global tables that have a replica in the specified region.
     #
     # @option params [String] :exclusive_start_global_table_name
     #   The first global table name that this operation will evaluate.
@@ -3131,11 +3138,12 @@ module Aws::DynamoDB
     #   retrieved by the `Query` action.
     #
     #   The condition must perform an equality test on a single partition key
-    #   value. The condition can also perform one of several comparison tests
-    #   on a single sort key value. `Query` can use `KeyConditionExpression`
-    #   to retrieve one item with a given partition key value and sort key
-    #   value, or several items that have the same partition key value but
-    #   different sort key values.
+    #   value.
+    #
+    #   The condition can optionally perform one of several comparison tests
+    #   on a single sort key value. This allows `Query` to retrieve one item
+    #   with a given partition key value and sort key value, or several items
+    #   that have the same partition key value but different sort key values.
     #
     #   The partition key equality test is required, and must be specified in
     #   the following format:
@@ -3406,6 +3414,8 @@ module Aws::DynamoDB
     #
     # * Tags
     #
+    # * Stream settings
+    #
     # * Time to Live (TTL) settings
     #
     # @option params [required, String] :target_table_name
@@ -3482,6 +3492,7 @@ module Aws::DynamoDB
     #   resp.table_description.restore_summary.source_table_arn #=> String
     #   resp.table_description.restore_summary.restore_date_time #=> Time
     #   resp.table_description.restore_summary.restore_in_progress #=> Boolean
+    #   resp.table_description.sse_description.status #=> String, one of "ENABLING", "ENABLED", "DISABLING", "DISABLED"
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/RestoreTableFromBackup AWS API Documentation
     #
@@ -4013,9 +4024,17 @@ module Aws::DynamoDB
       req.send_request(options)
     end
 
-    # Adds or removes replicas to the specified global table. The global
-    # table should already exist to be able to use this operation.
-    # Currently, the replica to be added should be empty.
+    # Adds or removes replicas in the specified global table. The global
+    # table must already exist to be able to use this operation. Any replica
+    # to be added must be empty, must have the same name as the global
+    # table, must have the same key schema, must have DynamoDB Streams
+    # enabled, and cannot have any local secondary indexes (LSIs).
+    #
+    # <note markdown="1"> Although you can use `UpdateGlobalTable` to add replicas and remove
+    # replicas in a single request, for simplicity we recommend that you
+    # issue separate requests for adding or removing replicas.
+    #
+    #  </note>
     #
     # @option params [required, String] :global_table_name
     #   The global table name.
@@ -4687,6 +4706,7 @@ module Aws::DynamoDB
     #   resp.table_description.restore_summary.source_table_arn #=> String
     #   resp.table_description.restore_summary.restore_date_time #=> Time
     #   resp.table_description.restore_summary.restore_in_progress #=> Boolean
+    #   resp.table_description.sse_description.status #=> String, one of "ENABLING", "ENABLED", "DISABLING", "DISABLED"
     #
     # @see http://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/UpdateTable AWS API Documentation
     #
@@ -4782,7 +4802,7 @@ module Aws::DynamoDB
         params: params,
         config: config)
       context[:gem_name] = 'aws-sdk-dynamodb'
-      context[:gem_version] = '1.3.0'
+      context[:gem_version] = '1.4.0'
       Seahorse::Client::Request.new(handlers, context)
     end
 

data/lib/aws-sdk-dynamodb/client_api.rb

@@ -194,6 +194,10 @@ module Aws::DynamoDB
     ReturnConsumedCapacity = Shapes::StringShape.new(name: 'ReturnConsumedCapacity')
     ReturnItemCollectionMetrics = Shapes::StringShape.new(name: 'ReturnItemCollectionMetrics')
     ReturnValue = Shapes::StringShape.new(name: 'ReturnValue')
+    SSEDescription = Shapes::StructureShape.new(name: 'SSEDescription')
+    SSEEnabled = Shapes::BooleanShape.new(name: 'SSEEnabled')
+    SSESpecification = Shapes::StructureShape.new(name: 'SSESpecification')
+    SSEStatus = Shapes::StringShape.new(name: 'SSEStatus')
     ScalarAttributeType = Shapes::StringShape.new(name: 'ScalarAttributeType')
     ScanInput = Shapes::StructureShape.new(name: 'ScanInput')
     ScanOutput = Shapes::StructureShape.new(name: 'ScanOutput')
@@ -382,6 +386,7 @@ module Aws::DynamoDB
     CreateTableInput.add_member(:global_secondary_indexes, Shapes::ShapeRef.new(shape: GlobalSecondaryIndexList, location_name: "GlobalSecondaryIndexes"))
     CreateTableInput.add_member(:provisioned_throughput, Shapes::ShapeRef.new(shape: ProvisionedThroughput, required: true, location_name: "ProvisionedThroughput"))
     CreateTableInput.add_member(:stream_specification, Shapes::ShapeRef.new(shape: StreamSpecification, location_name: "StreamSpecification"))
+    CreateTableInput.add_member(:sse_specification, Shapes::ShapeRef.new(shape: SSESpecification, location_name: "SSESpecification"))
     CreateTableInput.struct_class = Types::CreateTableInput
 
     CreateTableOutput.add_member(:table_description, Shapes::ShapeRef.new(shape: TableDescription, location_name: "TableDescription"))
@@ -742,6 +747,12 @@ module Aws::DynamoDB
     RestoreTableFromBackupOutput.add_member(:table_description, Shapes::ShapeRef.new(shape: TableDescription, location_name: "TableDescription"))
     RestoreTableFromBackupOutput.struct_class = Types::RestoreTableFromBackupOutput
 
+    SSEDescription.add_member(:status, Shapes::ShapeRef.new(shape: SSEStatus, location_name: "Status"))
+    SSEDescription.struct_class = Types::SSEDescription
+
+    SSESpecification.add_member(:enabled, Shapes::ShapeRef.new(shape: SSEEnabled, required: true, location_name: "Enabled"))
+    SSESpecification.struct_class = Types::SSESpecification
+
     ScanInput.add_member(:table_name, Shapes::ShapeRef.new(shape: TableName, required: true, location_name: "TableName"))
     ScanInput.add_member(:index_name, Shapes::ShapeRef.new(shape: IndexName, location_name: "IndexName"))
     ScanInput.add_member(:attributes_to_get, Shapes::ShapeRef.new(shape: AttributeNameList, location_name: "AttributesToGet"))
@@ -784,6 +795,7 @@ module Aws::DynamoDB
     SourceTableFeatureDetails.add_member(:global_secondary_indexes, Shapes::ShapeRef.new(shape: GlobalSecondaryIndexes, location_name: "GlobalSecondaryIndexes"))
     SourceTableFeatureDetails.add_member(:stream_description, Shapes::ShapeRef.new(shape: StreamSpecification, location_name: "StreamDescription"))
     SourceTableFeatureDetails.add_member(:time_to_live_description, Shapes::ShapeRef.new(shape: TimeToLiveDescription, location_name: "TimeToLiveDescription"))
+    SourceTableFeatureDetails.add_member(:sse_description, Shapes::ShapeRef.new(shape: SSEDescription, location_name: "SSEDescription"))
     SourceTableFeatureDetails.struct_class = Types::SourceTableFeatureDetails
 
     StreamSpecification.add_member(:stream_enabled, Shapes::ShapeRef.new(shape: StreamEnabled, location_name: "StreamEnabled"))
@@ -808,6 +820,7 @@ module Aws::DynamoDB
     TableDescription.add_member(:latest_stream_label, Shapes::ShapeRef.new(shape: String, location_name: "LatestStreamLabel"))
     TableDescription.add_member(:latest_stream_arn, Shapes::ShapeRef.new(shape: StreamArn, location_name: "LatestStreamArn"))
     TableDescription.add_member(:restore_summary, Shapes::ShapeRef.new(shape: RestoreSummary, location_name: "RestoreSummary"))
+    TableDescription.add_member(:sse_description, Shapes::ShapeRef.new(shape: SSEDescription, location_name: "SSEDescription"))
     TableDescription.struct_class = Types::TableDescription
 
     TableNameList.member = Shapes::ShapeRef.new(shape: TableName)

data/lib/aws-sdk-dynamodb/resource.rb

@@ -288,6 +288,9 @@ module Aws::DynamoDB
     #       stream_enabled: false,
     #       stream_view_type: "NEW_IMAGE", # accepts NEW_IMAGE, OLD_IMAGE, NEW_AND_OLD_IMAGES, KEYS_ONLY
     #     },
+    #     sse_specification: {
+    #       enabled: false, # required
+    #     },
     #   })
     # @param [Hash] options ({})
     # @option options [required, Array<Types::AttributeDefinition>] :attribute_definitions
@@ -451,6 +454,8 @@ module Aws::DynamoDB
     #
     #     * `NEW_AND_OLD_IMAGES` - Both the new and the old item images of the
     #       item are written to the stream.
+    # @option options [Types::SSESpecification] :sse_specification
+    #   Represents the settings used to enable server-side encryption.
     # @return [Table]
     def create_table(options = {})
       resp = @client.create_table(options)

data/lib/aws-sdk-dynamodb/table.rb

@@ -297,6 +297,13 @@ module Aws::DynamoDB
       data[:restore_summary]
     end
 
+    # The description of the server-side encryption status on the specified
+    # table.
+    # @return [Types::SSEDescription]
+    def sse_description
+      data[:sse_description]
+    end
+
     # @!endgroup
 
     # @return [Client]
@@ -1187,11 +1194,12 @@ module Aws::DynamoDB
     #   retrieved by the `Query` action.
     #
     #   The condition must perform an equality test on a single partition key
-    #   value. The condition can also perform one of several comparison tests
-    #   on a single sort key value. `Query` can use `KeyConditionExpression`
-    #   to retrieve one item with a given partition key value and sort key
-    #   value, or several items that have the same partition key value but
-    #   different sort key values.
+    #   value.
+    #
+    #   The condition can optionally perform one of several comparison tests
+    #   on a single sort key value. This allows `Query` to retrieve one item
+    #   with a given partition key value and sort key value, or several items
+    #   that have the same partition key value but different sort key values.
     #
     #   The partition key equality test is required, and must be specified in
     #   the following format:

data/lib/aws-sdk-dynamodb/types.rb

@@ -185,7 +185,7 @@ module Aws::DynamoDB
     #   Each attribute value is described as a name-value pair. The name is
     #   the data type, and the value is the data itself.
     #
-    #   For more information, see [Data TYpes][1] in the *Amazon DynamoDB
+    #   For more information, see [Data Types][1] in the *Amazon DynamoDB
     #   Developer Guide*.
     #
     #
@@ -1277,6 +1277,9 @@ module Aws::DynamoDB
     #           stream_enabled: false,
     #           stream_view_type: "NEW_IMAGE", # accepts NEW_IMAGE, OLD_IMAGE, NEW_AND_OLD_IMAGES, KEYS_ONLY
     #         },
+    #         sse_specification: {
+    #           enabled: false, # required
+    #         },
     #       }
     #
     # @!attribute [rw] attribute_definitions
@@ -1456,6 +1459,10 @@ module Aws::DynamoDB
     #       the item are written to the stream.
     #   @return [Types::StreamSpecification]
     #
+    # @!attribute [rw] sse_specification
+    #   Represents the settings used to enable server-side encryption.
+    #   @return [Types::SSESpecification]
+    #
     # @see http://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/CreateTableInput AWS API Documentation
     #
     class CreateTableInput < Struct.new(
@@ -1465,7 +1472,8 @@ module Aws::DynamoDB
       :local_secondary_indexes,
       :global_secondary_indexes,
       :provisioned_throughput,
-      :stream_specification)
+      :stream_specification,
+      :sse_specification)
       include Aws::Structure
     end
 
@@ -4243,11 +4251,13 @@ module Aws::DynamoDB
     #   retrieved by the `Query` action.
     #
     #   The condition must perform an equality test on a single partition
-    #   key value. The condition can also perform one of several comparison
-    #   tests on a single sort key value. `Query` can use
-    #   `KeyConditionExpression` to retrieve one item with a given partition
-    #   key value and sort key value, or several items that have the same
-    #   partition key value but different sort key values.
+    #   key value.
+    #
+    #   The condition can optionally perform one of several comparison tests
+    #   on a single sort key value. This allows `Query` to retrieve one item
+    #   with a given partition key value and sort key value, or several
+    #   items that have the same partition key value but different sort key
+    #   values.
     #
     #   The partition key equality test is required, and must be specified
     #   in the following format:
@@ -4633,6 +4643,49 @@ module Aws::DynamoDB
       include Aws::Structure
     end
 
+    # The description of the server-side encryption status on the specified
+    # table.
+    #
+    # @!attribute [rw] status
+    #   The current state of server-side encryption:
+    #
+    #   * `ENABLING` - Server-side encryption is being enabled.
+    #
+    #   * `ENABLED` - Server-side encryption is enabled.
+    #
+    #   * `DISABLING` - Server-side encryption is being disabled.
+    #
+    #   * `DISABLED` - Server-side encryption is disabled.
+    #   @return [String]
+    #
+    # @see http://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/SSEDescription AWS API Documentation
+    #
+    class SSEDescription < Struct.new(
+      :status)
+      include Aws::Structure
+    end
+
+    # Represents the settings used to enable server-side encryption.
+    #
+    # @note When making an API call, you may pass SSESpecification
+    #   data as a hash:
+    #
+    #       {
+    #         enabled: false, # required
+    #       }
+    #
+    # @!attribute [rw] enabled
+    #   Indicates whether server-side encryption is enabled (true) or
+    #   disabled (false) on the table.
+    #   @return [Boolean]
+    #
+    # @see http://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/SSESpecification AWS API Documentation
+    #
+    class SSESpecification < Struct.new(
+      :enabled)
+      include Aws::Structure
+    end
+
     # Represents the input of a `Scan` operation.
     #
     # @note When making an API call, you may pass ScanInput
@@ -5154,13 +5207,19 @@ module Aws::DynamoDB
     #   Time to Live settings on the table when the backup was created.
     #   @return [Types::TimeToLiveDescription]
     #
+    # @!attribute [rw] sse_description
+    #   The description of the server-side encryption status on the table
+    #   when the backup was created.
+    #   @return [Types::SSEDescription]
+    #
     # @see http://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/SourceTableFeatureDetails AWS API Documentation
     #
     class SourceTableFeatureDetails < Struct.new(
       :local_secondary_indexes,
       :global_secondary_indexes,
       :stream_description,
-      :time_to_live_description)
+      :time_to_live_description,
+      :sse_description)
       include Aws::Structure
     end
 
@@ -5449,6 +5508,11 @@ module Aws::DynamoDB
     #   Contains details for the restore.
     #   @return [Types::RestoreSummary]
     #
+    # @!attribute [rw] sse_description
+    #   The description of the server-side encryption status on the
+    #   specified table.
+    #   @return [Types::SSEDescription]
+    #
     # @see http://docs.aws.amazon.com/goto/WebAPI/dynamodb-2012-08-10/TableDescription AWS API Documentation
     #
     class TableDescription < Struct.new(
@@ -5467,7 +5531,8 @@ module Aws::DynamoDB
       :stream_specification,
       :latest_stream_label,
       :latest_stream_arn,
-      :restore_summary)
+      :restore_summary,
+      :sse_description)
       include Aws::Structure
     end
 

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: aws-sdk-dynamodb
 version: !ruby/object:Gem::Version
-  version: 1.3.0
+  version: 1.4.0
 platform: ruby
 authors:
 - Amazon Web Services
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2017-11-29 00:00:00.000000000 Z
+date: 2018-02-08 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: aws-sdk-core