aws-sdk-dynamodb 1.129.0 → 1.130.0

checksums.yaml

@@ -1,7 +1,7 @@
 ---
 SHA256:
-  metadata.gz: 2a63110f5a2633865fccdbceaffd6d3ef99d21ea857572ce41205711fab7ee15
-  data.tar.gz: a755989aee7fb20a0cf1fd69044434bda084ec13e28620bcd09e01d7caf1eb59
+  metadata.gz: 14964407a2acb9e6592aacd97326988eb46f76c4837d896635ade93e48550bbc
+  data.tar.gz: 1ce3c66bb492a578e97703f13078fb614493d95abbdb10577372c04082714a11
 SHA512:
-  metadata.gz: f16399fd5edb0c7e601c7fe4aa91108ab1bdf23528fde5e4d707bd2a4f30b48bcb0d8ef357cc8724dec359bcb58fe73ebcc9800ace936533d5aa828a3501349a
-  data.tar.gz: d914ca634425756276efa15c0bc069e4e3038de4ef536a7e6af6db5526e3ce6805383a5b6ca84e1fb40d8fdf3204bbf04940b291debb811fa9da8f68a0fa20f1
+  metadata.gz: 0ce159cb6446c59a3bb204155c6f36b2b6c7f693d832b5f810f3fc0784578fe3b70596a92b0213500e46f69f1e0cde2bde6131534568d7a5051f86b4d230694f
+  data.tar.gz: 9f43f5d128cd3d994a0f9a2b2af2257999265d0706f715c79df10eb4a7dd5bdaf503111dc1729661874e53a3c4906410b155b072d9e37dcff7e954b3d27eddc9

data/CHANGELOG.md

@@ -1,6 +1,11 @@
 Unreleased Changes
 ------------------
 
+1.130.0 (2024-11-18)
+------------------
+
+* Feature - Code Generated Changes, see `./build_tools` or `aws-sdk-core`'s CHANGELOG.md for details.
+
 1.129.0 (2024-11-13)
 ------------------
 

data/VERSION

@@ -1 +1 @@
-1.129.0
+1.130.0

data/lib/aws-sdk-dynamodb/client.rb

@@ -665,14 +665,12 @@ module Aws::DynamoDB
     #
     #     * To prevent special characters in an attribute name from being
     #       misinterpreted in an expression.
-    #
     #     Use the **#** character in an expression to dereference an attribute
     #     name. For example, consider the following attribute name:
     #
     #     * `Percentile`
     #
     #     ^
-    #
     #     The name of this attribute conflicts with a reserved word, so it
     #     cannot be used directly in an expression. (For the complete list of
     #     reserved words, see [Reserved Words][1] in the *Amazon DynamoDB
@@ -682,14 +680,12 @@ module Aws::DynamoDB
     #     * `{"#P":"Percentile"}`
     #
     #     ^
-    #
     #     You could then use this substitution in an expression, as in this
     #     example:
     #
     #     * `#P = :val`
     #
     #     ^
-    #
     #     <note markdown="1"> Tokens that begin with the **\:** character are *expression
     #     attribute values*, which are placeholders for the actual value at
     #     runtime.
@@ -979,7 +975,6 @@ module Aws::DynamoDB
     #       *both* the partition key and the sort key.
     #
     #     ^
-    #
     #   * `PutRequest` - Perform a `PutItem` operation on the specified item.
     #     The item to be put is identified by an `Item` subelement:
     #
@@ -1421,7 +1416,6 @@ module Aws::DynamoDB
     #
     #       * `ALL` - All of the table attributes are projected into the
     #         index.
-    #
     #     * `NonKeyAttributes` - A list of one or more non-key attribute names
     #       that are projected into the secondary index. The total count of
     #       attributes provided in `NonKeyAttributes`, summed across all of
@@ -1458,14 +1452,12 @@ module Aws::DynamoDB
     #
     #       * `ALL` - All of the table attributes are projected into the
     #         index.
-    #
     #     * `NonKeyAttributes` - A list of one or more non-key attribute names
     #       that are projected into the secondary index. The total count of
     #       attributes provided in `NonKeyAttributes`, summed across all of
     #       the secondary indexes, must not exceed 100. If you project the
     #       same attribute into two different indexes, this counts as two
     #       distinct attributes when determining the total.
-    #
     #   * `ProvisionedThroughput` - The provisioned throughput settings for
     #     the global secondary index, consisting of read and write capacity
     #     units.
@@ -3031,7 +3023,6 @@ module Aws::DynamoDB
     #     * If the table has one or more global secondary indexes (GSIs),
     #       loop over these GSIs and add their provisioned capacity values
     #       to your variables as well.
-    #
     # 5.  Report the account quotas for that Region returned by
     #     `DescribeLimits`, along with the total current provisioned
     #     capacity levels you have calculated.
@@ -7572,7 +7563,6 @@ module Aws::DynamoDB
     #     * `list_append (operand, operand)` - evaluates to a list with a new
     #       element added to it. You can append the new element to the start
     #       or the end of the list by reversing the order of the operands.
-    #
     #     These function names are case-sensitive.
     #
     #   * `REMOVE` - Removes one or more attributes from an item.
@@ -7612,7 +7602,6 @@ module Aws::DynamoDB
     #       Both sets must have the same primitive data type. For example, if
     #       the existing data type is a set of strings, the `Value` must also
     #       be a set of strings.
-    #
     #     The `ADD` action only supports Number and set data types. In
     #     addition, `ADD` can only be used on top-level attributes, not nested
     #     attributes.
@@ -8570,7 +8559,7 @@ module Aws::DynamoDB
         tracer: tracer
       )
       context[:gem_name] = 'aws-sdk-dynamodb'
-      context[:gem_version] = '1.129.0'
+      context[:gem_version] = '1.130.0'
       Seahorse::Client::Request.new(handlers, context)
     end
 

data/lib/aws-sdk-dynamodb/resource.rb

@@ -79,14 +79,12 @@ module Aws::DynamoDB
     #
     #     * To prevent special characters in an attribute name from being
     #       misinterpreted in an expression.
-    #
     #     Use the **#** character in an expression to dereference an attribute
     #     name. For example, consider the following attribute name:
     #
     #     * `Percentile`
     #
     #     ^
-    #
     #     The name of this attribute conflicts with a reserved word, so it
     #     cannot be used directly in an expression. (For the complete list of
     #     reserved words, see [Reserved Words][1] in the *Amazon DynamoDB
@@ -96,14 +94,12 @@ module Aws::DynamoDB
     #     * `{"#P":"Percentile"}`
     #
     #     ^
-    #
     #     You could then use this substitution in an expression, as in this
     #     example:
     #
     #     * `#P = :val`
     #
     #     ^
-    #
     #     <note markdown="1"> Tokens that begin with the **\:** character are *expression
     #     attribute values*, which are placeholders for the actual value at
     #     runtime.
@@ -206,7 +202,6 @@ module Aws::DynamoDB
     #       *both* the partition key and the sort key.
     #
     #     ^
-    #
     #   * `PutRequest` - Perform a `PutItem` operation on the specified item.
     #     The item to be put is identified by an `Item` subelement:
     #
@@ -422,7 +417,6 @@ module Aws::DynamoDB
     #
     #       * `ALL` - All of the table attributes are projected into the
     #         index.
-    #
     #     * `NonKeyAttributes` - A list of one or more non-key attribute names
     #       that are projected into the secondary index. The total count of
     #       attributes provided in `NonKeyAttributes`, summed across all of
@@ -458,14 +452,12 @@ module Aws::DynamoDB
     #
     #       * `ALL` - All of the table attributes are projected into the
     #         index.
-    #
     #     * `NonKeyAttributes` - A list of one or more non-key attribute names
     #       that are projected into the secondary index. The total count of
     #       attributes provided in `NonKeyAttributes`, summed across all of
     #       the secondary indexes, must not exceed 100. If you project the
     #       same attribute into two different indexes, this counts as two
     #       distinct attributes when determining the total.
-    #
     #   * `ProvisionedThroughput` - The provisioned throughput settings for
     #     the global secondary index, consisting of read and write capacity
     #     units.

data/lib/aws-sdk-dynamodb/table.rb

@@ -58,7 +58,6 @@ module Aws::DynamoDB
     #   * `HASH` - partition key
     #
     #   * `RANGE` - sort key
-    #
     #   <note markdown="1"> The partition key of an item is also known as its *hash attribute*.
     #   The term "hash attribute" derives from DynamoDB's usage of an
     #   internal hash function to evenly distribute data items across
@@ -191,14 +190,12 @@ module Aws::DynamoDB
     #
     #     * `ALL` - All of the table attributes are projected into the
     #       index.
-    #
     #   * `NonKeyAttributes` - A list of one or more non-key attribute names
     #     that are projected into the secondary index. The total count of
     #     attributes provided in `NonKeyAttributes`, summed across all of
     #     the secondary indexes, must not exceed 100. If you project the
     #     same attribute into two different indexes, this counts as two
     #     distinct attributes when determining the total.
-    #
     # * `IndexSizeBytes` - Represents the total size of the index, in bytes.
     #   DynamoDB updates this value approximately every six hours. Recent
     #   changes might not be reflected in this value.
@@ -246,7 +243,6 @@ module Aws::DynamoDB
     #   * `DELETING` - The index is being deleted.
     #
     #   * `ACTIVE` - The index is ready for use.
-    #
     # * `ItemCount` - The number of items in the global secondary index.
     #   DynamoDB updates this value approximately every six hours. Recent
     #   changes might not be reflected in this value.
@@ -272,14 +268,12 @@ module Aws::DynamoDB
     #
     #     * `ALL` - All of the table attributes are projected into the
     #       index.
-    #
     #   * `NonKeyAttributes` - A list of one or more non-key attribute names
     #     that are projected into the secondary index. The total count of
     #     attributes provided in `NonKeyAttributes`, summed across all of
     #     the secondary indexes, must not exceed 100. If you project the
     #     same attribute into two different indexes, this counts as two
     #     distinct attributes when determining the total.
-    #
     # * `ProvisionedThroughput` - The provisioned throughput settings for
     #   the global secondary index, consisting of read and write capacity
     #   units, along with data about increases and decreases.
@@ -2157,7 +2151,6 @@ module Aws::DynamoDB
     #     * `list_append (operand, operand)` - evaluates to a list with a new
     #       element added to it. You can append the new element to the start
     #       or the end of the list by reversing the order of the operands.
-    #
     #     These function names are case-sensitive.
     #
     #   * `REMOVE` - Removes one or more attributes from an item.
@@ -2197,7 +2190,6 @@ module Aws::DynamoDB
     #       Both sets must have the same primitive data type. For example, if
     #       the existing data type is a set of strings, the `Value` must also
     #       be a set of strings.
-    #
     #     The `ADD` action only supports Number and set data types. In
     #     addition, `ADD` can only be used on top-level attributes, not nested
     #     attributes.

data/lib/aws-sdk-dynamodb/types.rb

@@ -258,7 +258,6 @@ module Aws::DynamoDB
     #       if the existing data type is a set of strings, the `Value` must
     #       also be a set of strings. The same holds true for number sets
     #       and binary sets.
-    #
     #     This action is only valid for an existing attribute whose data
     #     type is number or is a set. Do not use `ADD` for any other data
     #     types.
@@ -760,7 +759,6 @@ module Aws::DynamoDB
     #
     #     * To prevent special characters in an attribute name from being
     #       misinterpreted in an expression.
-    #
     #     Use the **#** character in an expression to dereference an
     #     attribute name. For example, consider the following attribute
     #     name:
@@ -768,7 +766,6 @@ module Aws::DynamoDB
     #     * `Percentile`
     #
     #     ^
-    #
     #     The name of this attribute conflicts with a reserved word, so it
     #     cannot be used directly in an expression. (For the complete list
     #     of reserved words, see [Reserved Words][1] in the *Amazon DynamoDB
@@ -778,14 +775,12 @@ module Aws::DynamoDB
     #     * `{"#P":"Percentile"}`
     #
     #     ^
-    #
     #     You could then use this substitution in an expression, as in this
     #     example:
     #
     #     * `#P = :val`
     #
     #     ^
-    #
     #     <note markdown="1"> Tokens that begin with the **\:** character are *expression
     #     attribute values*, which are placeholders for the actual value at
     #     runtime.
@@ -1013,7 +1008,6 @@ module Aws::DynamoDB
     #       values for *both* the partition key and the sort key.
     #
     #     ^
-    #
     #   * `PutRequest` - Perform a `PutItem` operation on the specified
     #     item. The item to be put is identified by an `Item` subelement:
     #
@@ -1089,7 +1083,6 @@ module Aws::DynamoDB
     #       attribute name and an attribute value.
     #
     #     ^
-    #
     #   * `PutRequest` - Perform a `PutItem` operation on the specified
     #     item. The item to be put is identified by an `Item` subelement:
     #
@@ -1932,7 +1925,6 @@ module Aws::DynamoDB
     #
     #       * `ALL` - All of the table attributes are projected into the
     #         index.
-    #
     #     * `NonKeyAttributes` - A list of one or more non-key attribute
     #       names that are projected into the secondary index. The total
     #       count of attributes provided in `NonKeyAttributes`, summed
@@ -1971,14 +1963,12 @@ module Aws::DynamoDB
     #
     #       * `ALL` - All of the table attributes are projected into the
     #         index.
-    #
     #     * `NonKeyAttributes` - A list of one or more non-key attribute
     #       names that are projected into the secondary index. The total
     #       count of attributes provided in `NonKeyAttributes`, summed
     #       across all of the secondary indexes, must not exceed 100. If you
     #       project the same attribute into two different indexes, this
     #       counts as two distinct attributes when determining the total.
-    #
     #   * `ProvisionedThroughput` - The provisioned throughput settings for
     #     the global secondary index, consisting of read and write capacity
     #     units.
@@ -8712,7 +8702,6 @@ module Aws::DynamoDB
     #     * `HASH` - partition key
     #
     #     * `RANGE` - sort key
-    #
     #     <note markdown="1"> The partition key of an item is also known as its *hash
     #     attribute*. The term "hash attribute" derives from DynamoDB's
     #     usage of an internal hash function to evenly distribute data items
@@ -8828,14 +8817,12 @@ module Aws::DynamoDB
     #
     #       * `ALL` - All of the table attributes are projected into the
     #         index.
-    #
     #     * `NonKeyAttributes` - A list of one or more non-key attribute
     #       names that are projected into the secondary index. The total
     #       count of attributes provided in `NonKeyAttributes`, summed
     #       across all of the secondary indexes, must not exceed 100. If you
     #       project the same attribute into two different indexes, this
     #       counts as two distinct attributes when determining the total.
-    #
     #   * `IndexSizeBytes` - Represents the total size of the index, in
     #     bytes. DynamoDB updates this value approximately every six hours.
     #     Recent changes might not be reflected in this value.
@@ -8881,7 +8868,6 @@ module Aws::DynamoDB
     #     * `DELETING` - The index is being deleted.
     #
     #     * `ACTIVE` - The index is ready for use.
-    #
     #   * `ItemCount` - The number of items in the global secondary index.
     #     DynamoDB updates this value approximately every six hours. Recent
     #     changes might not be reflected in this value.
@@ -8908,14 +8894,12 @@ module Aws::DynamoDB
     #
     #       * `ALL` - All of the table attributes are projected into the
     #         index.
-    #
     #     * `NonKeyAttributes` - A list of one or more non-key attribute
     #       names that are projected into the secondary index. The total
     #       count of attributes provided in `NonKeyAttributes`, summed
     #       across all of the secondary indexes, must not exceed 100. If you
     #       project the same attribute into two different indexes, this
     #       counts as two distinct attributes when determining the total.
-    #
     #   * `ProvisionedThroughput` - The provisioned throughput settings for
     #     the global secondary index, consisting of read and write capacity
     #     units, along with data about increases and decreases.
@@ -9428,25 +9412,21 @@ module Aws::DynamoDB
     #   * Code: `None`
     #
     #   * Message: `null`
-    #
     # * Conditional Check Failed:
     #
     #   * Code: `ConditionalCheckFailed`
     #
     #   * Message: The conditional request failed.
-    #
     # * Item Collection Size Limit Exceeded:
     #
     #   * Code: `ItemCollectionSizeLimitExceeded`
     #
     #   * Message: Collection size exceeded.
-    #
     # * Transaction Conflict:
     #
     #   * Code: `TransactionConflict`
     #
     #   * Message: Transaction is ongoing for the item.
-    #
     # * Provisioned Throughput Exceeded:
     #
     #   * Code: `ProvisionedThroughputExceeded`
@@ -9471,7 +9451,6 @@ module Aws::DynamoDB
     #       is on a provisioned GSI.
     #
     #        </note>
-    #
     # * Throttling Error:
     #
     #   * Code: `ThrottlingError`
@@ -9497,7 +9476,6 @@ module Aws::DynamoDB
     #       On-Demand GSI as DynamoDB is automatically scaling the GSI.
     #
     #        </note>
-    #
     # * Validation Error:
     #
     #   * Code: `ValidationError`
@@ -10040,7 +10018,6 @@ module Aws::DynamoDB
     #       new element added to it. You can append the new element to the
     #       start or the end of the list by reversing the order of the
     #       operands.
-    #
     #     These function names are case-sensitive.
     #
     #   * `REMOVE` - Removes one or more attributes from an item.
@@ -10081,7 +10058,6 @@ module Aws::DynamoDB
     #       Both sets must have the same primitive data type. For example,
     #       if the existing data type is a set of strings, the `Value` must
     #       also be a set of strings.
-    #
     #     The `ADD` action only supports Number and set data types. In
     #     addition, `ADD` can only be used on top-level attributes, not
     #     nested attributes.

data/lib/aws-sdk-dynamodb.rb

@@ -56,7 +56,7 @@ module Aws::DynamoDB
   autoload :Endpoints, 'aws-sdk-dynamodb/endpoints'
   autoload :Table, 'aws-sdk-dynamodb/table'
 
-  GEM_VERSION = '1.129.0'
+  GEM_VERSION = '1.130.0'
 
 end
 

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: aws-sdk-dynamodb
 version: !ruby/object:Gem::Version
-  version: 1.129.0
+  version: 1.130.0
 platform: ruby
 authors:
 - Amazon Web Services
 autorequire:
 bindir: bin
 cert_chain: []
-date: 2024-11-13 00:00:00.000000000 Z
+date: 2024-11-18 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: aws-sdk-core