aws-sdk-costexplorer 1.36.0 → 1.37.0

checksums.yaml

@@ -1,7 +1,7 @@
 ---
-SHA1:
-  metadata.gz: 3111002a074ce32db299c6dbdaa67c11d8309222
-  data.tar.gz: 4e2f8bf9636ad9a46cdbfbc3721222a721ce348c
+SHA256:
+  metadata.gz: 2b9ed73e6465e9953bf49ffe783c4484fb64e3e389e614c41b54fe5c5a89a998
+  data.tar.gz: f4202e1392fb96a8c03d04e1b698214cb5a77d4502f0491b9ea6feefd0e6ad3d
 SHA512:
-  metadata.gz: b4762a81011d0fb1a1cd02099f6551ddb9148456619ee3e74ff3b27841437d3f8e272e2a12fb605ec7a3b63edc99bf707fe59e70aac1e68693f999cb063ada14
-  data.tar.gz: 2af35cbb1ca6986c5a59214634fb2523774f19982566cabe7178168c2cf7f87e7ed0e14c461e08f927f216bdb5e4c1a7d032b82b0e2d874ac79f45a984d6f743
+  metadata.gz: e31c7be554203a1301c1720561d565a0ed6f7bc3a53a5c2ece0780c010f06e496874abc77d396d90b7b0051cdbcffd9e17a47f7af60c932a08e2b975aee70cbc
+  data.tar.gz: 22ff2c7c127340494655500e360f37d7fc13adbb4a25e545cbe95464efe60563f8312effc4c3d20bf269ae0f40e0098d6e5b8ffedec5715139c85dff8e52a7c7

data/lib/aws-sdk-costexplorer.rb

@@ -24,17 +24,20 @@ require_relative 'aws-sdk-costexplorer/customizations'
 # methods each accept a hash of request parameters and return a response
 # structure.
 #
+#     cost_explorer = Aws::CostExplorer::Client.new
+#     resp = cost_explorer.create_cost_category_definition(params)
+#
 # See {Client} for more information.
 #
 # # Errors
 #
-# Errors returned from AWS Cost Explorer Service all
-# extend {Errors::ServiceError}.
+# Errors returned from AWS Cost Explorer Service are defined in the
+# {Errors} module and all extend {Errors::ServiceError}.
 #
 #     begin
 #       # do stuff
 #     rescue Aws::CostExplorer::Errors::ServiceError
-#       # rescues all service API errors
+#       # rescues all AWS Cost Explorer Service API errors
 #     end
 #
 # See {Errors} for more information.
@@ -42,6 +45,6 @@ require_relative 'aws-sdk-costexplorer/customizations'
 # @service
 module Aws::CostExplorer
 
-  GEM_VERSION = '1.36.0'
+  GEM_VERSION = '1.37.0'
 
 end

data/lib/aws-sdk-costexplorer/client.rb

@@ -30,6 +30,18 @@ require 'aws-sdk-core/plugins/protocols/json_rpc.rb'
 Aws::Plugins::GlobalConfiguration.add_identifier(:costexplorer)
 
 module Aws::CostExplorer
+  # An API client for CostExplorer.  To construct a client, you need to configure a `:region` and `:credentials`.
+  #
+  #     client = Aws::CostExplorer::Client.new(
+  #       region: region_name,
+  #       credentials: credentials,
+  #       # ...
+  #     )
+  #
+  # For details on configuring region and credentials see
+  # the [developer guide](/sdk-for-ruby/v3/developer-guide/setup-config.html).
+  #
+  # See {#initialize} for a full list of supported configuration options.
   class Client < Seahorse::Client::Base
 
     include Aws::ClientStubs
@@ -108,6 +120,12 @@ module Aws::CostExplorer
     #     When set to `true`, a thread polling for endpoints will be running in
     #     the background every 60 secs (default). Defaults to `false`.
     #
+    #   @option options [Boolean] :adaptive_retry_wait_to_fill (true)
+    #     Used only in `adaptive` retry mode.  When true, the request will sleep
+    #     until there is sufficent client side capacity to retry the request.
+    #     When false, the request will raise a `RetryCapacityNotAvailableError` and will
+    #     not retry instead of sleeping.
+    #
     #   @option options [Boolean] :client_side_monitoring (false)
     #     When `true`, client-side metrics will be collected for all API requests from
     #     this client.
@@ -132,6 +150,10 @@ module Aws::CostExplorer
     #     When `true`, an attempt is made to coerce request parameters into
     #     the required types.
     #
+    #   @option options [Boolean] :correct_clock_skew (true)
+    #     Used only in `standard` and adaptive retry modes. Specifies whether to apply
+    #     a clock skew correction and retry requests with skewed client clocks.
+    #
     #   @option options [Boolean] :disable_host_prefix_injection (false)
     #     Set to true to disable SDK automatically adding host prefix
     #     to default service endpoint when available.
@@ -166,15 +188,29 @@ module Aws::CostExplorer
     #     The Logger instance to send log messages to.  If this option
     #     is not set, logging will be disabled.
     #
+    #   @option options [Integer] :max_attempts (3)
+    #     An integer representing the maximum number attempts that will be made for
+    #     a single request, including the initial attempt.  For example,
+    #     setting this value to 5 will result in a request being retried up to
+    #     4 times. Used in `standard` and `adaptive` retry modes.
+    #
     #   @option options [String] :profile ("default")
     #     Used when loading credentials from the shared credentials file
     #     at HOME/.aws/credentials.  When not specified, 'default' is used.
     #
+    #   @option options [Proc] :retry_backoff
+    #     A proc or lambda used for backoff. Defaults to 2**retries * retry_base_delay.
+    #     This option is only used in the `legacy` retry mode.
+    #
     #   @option options [Float] :retry_base_delay (0.3)
-    #     The base delay in seconds used by the default backoff function.
+    #     The base delay in seconds used by the default backoff function. This option
+    #     is only used in the `legacy` retry mode.
     #
     #   @option options [Symbol] :retry_jitter (:none)
-    #     A delay randomiser function used by the default backoff function. Some predefined functions can be referenced by name - :none, :equal, :full, otherwise a Proc that takes and returns a number.
+    #     A delay randomiser function used by the default backoff function.
+    #     Some predefined functions can be referenced by name - :none, :equal, :full,
+    #     otherwise a Proc that takes and returns a number. This option is only used
+    #     in the `legacy` retry mode.
     #
     #     @see https://www.awsarchitectureblog.com/2015/03/backoff.html
     #
@@ -182,11 +218,30 @@ module Aws::CostExplorer
     #     The maximum number of times to retry failed requests.  Only
     #     ~ 500 level server errors and certain ~ 400 level client errors
     #     are retried.  Generally, these are throttling errors, data
-    #     checksum errors, networking errors, timeout errors and auth
-    #     errors from expired credentials.
+    #     checksum errors, networking errors, timeout errors, auth errors,
+    #     endpoint discovery, and errors from expired credentials.
+    #     This option is only used in the `legacy` retry mode.
     #
     #   @option options [Integer] :retry_max_delay (0)
-    #     The maximum number of seconds to delay between retries (0 for no limit) used by the default backoff function.
+    #     The maximum number of seconds to delay between retries (0 for no limit)
+    #     used by the default backoff function. This option is only used in the
+    #     `legacy` retry mode.
+    #
+    #   @option options [String] :retry_mode ("legacy")
+    #     Specifies which retry algorithm to use. Values are:
+    #
+    #     * `legacy` - The pre-existing retry behavior.  This is default value if
+    #       no retry mode is provided.
+    #
+    #     * `standard` - A standardized set of retry rules across the AWS SDKs.
+    #       This includes support for retry quotas, which limit the number of
+    #       unsuccessful retries a client can make.
+    #
+    #     * `adaptive` - An experimental retry mode that includes all the
+    #       functionality of `standard` mode along with automatic client side
+    #       throttling.  This is a provisional mode that may change behavior
+    #       in the future.
+    #
     #
     #   @option options [String] :secret_access_key
     #
@@ -219,16 +274,16 @@ module Aws::CostExplorer
     #     requests through.  Formatted like 'http://proxy.com:123'.
     #
     #   @option options [Float] :http_open_timeout (15) The number of
-    #     seconds to wait when opening a HTTP session before rasing a
+    #     seconds to wait when opening a HTTP session before raising a
     #     `Timeout::Error`.
     #
     #   @option options [Integer] :http_read_timeout (60) The default
     #     number of seconds to wait for response data.  This value can
     #     safely be set
-    #     per-request on the session yeidled by {#session_for}.
+    #     per-request on the session yielded by {#session_for}.
     #
     #   @option options [Float] :http_idle_timeout (5) The number of
-    #     seconds a connection is allowed to sit idble before it is
+    #     seconds a connection is allowed to sit idle before it is
     #     considered stale.  Stale connections are closed and removed
     #     from the pool before making a request.
     #
@@ -237,7 +292,7 @@ module Aws::CostExplorer
     #     request body.  This option has no effect unless the request has
     #     "Expect" header set to "100-continue".  Defaults to `nil` which
     #     disables this behaviour.  This value can safely be set per
-    #     request on the session yeidled by {#session_for}.
+    #     request on the session yielded by {#session_for}.
     #
     #   @option options [Boolean] :http_wire_trace (false) When `true`,
     #     HTTP debug output will be sent to the `:logger`.
@@ -2593,7 +2648,7 @@ module Aws::CostExplorer
         params: params,
         config: config)
       context[:gem_name] = 'aws-sdk-costexplorer'
-      context[:gem_version] = '1.36.0'
+      context[:gem_version] = '1.37.0'
       Seahorse::Client::Request.new(handlers, context)
     end
 

data/lib/aws-sdk-costexplorer/errors.rb

@@ -6,6 +6,36 @@
 # WARNING ABOUT GENERATED CODE
 
 module Aws::CostExplorer
+
+  # When CostExplorer returns an error response, the Ruby SDK constructs and raises an error.
+  # These errors all extend Aws::CostExplorer::Errors::ServiceError < {Aws::Errors::ServiceError}
+  #
+  # You can rescue all CostExplorer errors using ServiceError:
+  #
+  #     begin
+  #       # do stuff
+  #     rescue Aws::CostExplorer::Errors::ServiceError
+  #       # rescues all CostExplorer API errors
+  #     end
+  #
+  #
+  # ## Request Context
+  # ServiceError objects have a {Aws::Errors::ServiceError#context #context} method that returns
+  # information about the request that generated the error.
+  # See {Seahorse::Client::RequestContext} for more information.
+  #
+  # ## Error Classes
+  # * {BillExpirationException}
+  # * {DataUnavailableException}
+  # * {InvalidNextTokenException}
+  # * {LimitExceededException}
+  # * {RequestChangedException}
+  # * {ResourceNotFoundException}
+  # * {ServiceQuotaExceededException}
+  # * {UnresolvableUsageUnitException}
+  #
+  # Additionally, error classes are dynamically generated for service errors based on the error code
+  # if they are not defined above.
   module Errors
 
     extend Aws::Errors::DynamicErrors
@@ -23,7 +53,6 @@ module Aws::CostExplorer
       def message
         @message || @data[:message]
       end
-
     end
 
     class DataUnavailableException < ServiceError
@@ -39,7 +68,6 @@ module Aws::CostExplorer
       def message
         @message || @data[:message]
       end
-
     end
 
     class InvalidNextTokenException < ServiceError
@@ -55,7 +83,6 @@ module Aws::CostExplorer
       def message
         @message || @data[:message]
       end
-
     end
 
     class LimitExceededException < ServiceError
@@ -71,7 +98,6 @@ module Aws::CostExplorer
       def message
         @message || @data[:message]
       end
-
     end
 
     class RequestChangedException < ServiceError
@@ -87,7 +113,6 @@ module Aws::CostExplorer
       def message
         @message || @data[:message]
       end
-
     end
 
     class ResourceNotFoundException < ServiceError
@@ -103,7 +128,6 @@ module Aws::CostExplorer
       def message
         @message || @data[:message]
       end
-
     end
 
     class ServiceQuotaExceededException < ServiceError
@@ -119,7 +143,6 @@ module Aws::CostExplorer
       def message
         @message || @data[:message]
       end
-
     end
 
     class UnresolvableUsageUnitException < ServiceError
@@ -135,7 +158,6 @@ module Aws::CostExplorer
       def message
         @message || @data[:message]
       end
-
     end
 
   end

data/lib/aws-sdk-costexplorer/resource.rb

@@ -6,6 +6,13 @@
 # WARNING ABOUT GENERATED CODE
 
 module Aws::CostExplorer
+  # This class provides a resource oriented interface for CostExplorer.
+  # To create a resource object:
+  #     resource = Aws::CostExplorer::Resource.new(region: 'us-west-2')
+  # You can supply a client object with custom configuration that will be used for all resource operations.
+  # If you do not pass +:client+, a default client will be constructed.
+  #     client = Aws::CostExplorer::Client.new(region: 'us-west-2')
+  #     resource = Aws::CostExplorer::Resource.new(client: client)
   class Resource
 
     # @param options ({})

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: aws-sdk-costexplorer
 version: !ruby/object:Gem::Version
-  version: 1.36.0
+  version: 1.37.0
 platform: ruby
 authors:
 - Amazon Web Services
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2020-01-08 00:00:00.000000000 Z
+date: 2020-03-16 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: aws-sdk-core
@@ -80,8 +80,7 @@ required_rubygems_version: !ruby/object:Gem::Requirement
     - !ruby/object:Gem::Version
       version: '0'
 requirements: []
-rubyforge_project: 
-rubygems_version: 2.5.2.3
+rubygems_version: 3.0.3
 signing_key: 
 specification_version: 4
 summary: AWS SDK for Ruby - AWS Cost Explorer