aws-sdk-connectparticipant 1.1.0 → 1.2.0

checksums.yaml

@@ -1,7 +1,7 @@
 ---
-SHA1:
-  metadata.gz: 27884d814ebeb08206dd3bc473836ab857fac42d
-  data.tar.gz: fabefc42cfdb4fc403e9c3a28ab3ca0e41818013
+SHA256:
+  metadata.gz: 2a81b7fb44e1cfd8d6240ded235e68e12c20a43406972a085791c4d3a8abe8a6
+  data.tar.gz: 1da9d53853ebced72b6123e2560125c731e5f1017d2868446b28a7bfa1c0b1d1
 SHA512:
-  metadata.gz: 191231d8f2c5db65a2884101a33e95b278dc3d42cb1b951d402dded15230914b86268d897c1cd47d527393fff6b98465d48ad8837ebe579408113962fd810379
-  data.tar.gz: 423437c5d8bc673204ec4a9ff570e5d6fccfc69ae775ab8f0b2b84eedef673f2d476b889903cd1c6d6d0cd5043aeec1b4f1e3c50940560999975fd356ebf726e
+  metadata.gz: 347b458eec09fa73277db4d758d8c4a12cfea957fb596667c16160fc5093ba1fd4e2a231c7a07100808935a697cf02b9adae3123d677122ba0df8a310320fc2d
+  data.tar.gz: fac6d749c82684f9b282e15df8270fb575f27acc6bd3fa6c3feb4cc7cef2e936c2dd6237472dfdff479b352d2544c0980f7ebc39ecb818a80411ce5efee6851c

data/lib/aws-sdk-connectparticipant.rb

@@ -45,6 +45,6 @@ require_relative 'aws-sdk-connectparticipant/customizations'
 # @service
 module Aws::ConnectParticipant
 
-  GEM_VERSION = '1.1.0'
+  GEM_VERSION = '1.2.0'
 
 end

data/lib/aws-sdk-connectparticipant/client.rb

@@ -32,11 +32,11 @@ Aws::Plugins::GlobalConfiguration.add_identifier(:connectparticipant)
 module Aws::ConnectParticipant
   # An API client for ConnectParticipant.  To construct a client, you need to configure a `:region` and `:credentials`.
   #
-  #   client = Aws::ConnectParticipant::Client.new(
-  #     region: region_name,
-  #     credentials: credentials,
-  #     # ...
-  #   )
+  #     client = Aws::ConnectParticipant::Client.new(
+  #       region: region_name,
+  #       credentials: credentials,
+  #       # ...
+  #     )
   #
   # For details on configuring region and credentials see
   # the [developer guide](/sdk-for-ruby/v3/developer-guide/setup-config.html).
@@ -105,7 +105,7 @@ module Aws::ConnectParticipant
     #   @option options [required, String] :region
     #     The AWS region to connect to.  The configured `:region` is
     #     used to determine the service `:endpoint`. When not passed,
-    #     a default `:region` is search for in the following locations:
+    #     a default `:region` is searched for in the following locations:
     #
     #     * `Aws.config[:region]`
     #     * `ENV['AWS_REGION']`
@@ -161,7 +161,7 @@ module Aws::ConnectParticipant
     #   @option options [String] :endpoint
     #     The client endpoint is normally constructed from the `:region`
     #     option. You should only configure an `:endpoint` when connecting
-    #     to test endpoints. This should be avalid HTTP(S) URI.
+    #     to test endpoints. This should be a valid HTTP(S) URI.
     #
     #   @option options [Integer] :endpoint_cache_max_entries (1000)
     #     Used for the maximum size limit of the LRU cache storing endpoints data
@@ -229,15 +229,19 @@ module Aws::ConnectParticipant
     #
     #   @option options [String] :retry_mode ("legacy")
     #     Specifies which retry algorithm to use. Values are:
-    #       * `legacy` - The pre-existing retry behavior.  This is default value if
-    #         no retry mode is provided.
-    #       * `standard` - A standardized set of retry rules across the AWS SDKs.
-    #         This includes support for retry quotas, which limit the number of
-    #         unsuccessful retries a client can make.
-    #       * `adaptive` - An experimental retry mode that includes all the
-    #         functionality of `standard` mode along with automatic client side
-    #         throttling.  This is a provisional mode that may change behavior
-    #         in the future.
+    #
+    #     * `legacy` - The pre-existing retry behavior.  This is default value if
+    #       no retry mode is provided.
+    #
+    #     * `standard` - A standardized set of retry rules across the AWS SDKs.
+    #       This includes support for retry quotas, which limit the number of
+    #       unsuccessful retries a client can make.
+    #
+    #     * `adaptive` - An experimental retry mode that includes all the
+    #       functionality of `standard` mode along with automatic client side
+    #       throttling.  This is a provisional mode that may change behavior
+    #       in the future.
+    #
     #
     #   @option options [String] :secret_access_key
     #
@@ -265,8 +269,7 @@ module Aws::ConnectParticipant
     #
     #   @option options [Integer] :http_read_timeout (60) The default
     #     number of seconds to wait for response data.  This value can
-    #     safely be set
-    #     per-request on the session yielded by {#session_for}.
+    #     safely be set per-request on the session.
     #
     #   @option options [Float] :http_idle_timeout (5) The number of
     #     seconds a connection is allowed to sit idle before it is
@@ -278,7 +281,7 @@ module Aws::ConnectParticipant
     #     request body.  This option has no effect unless the request has
     #     "Expect" header set to "100-continue".  Defaults to `nil` which
     #     disables this behaviour.  This value can safely be set per
-    #     request on the session yielded by {#session_for}.
+    #     request on the session.
     #
     #   @option options [Boolean] :http_wire_trace (false) When `true`,
     #     HTTP debug output will be sent to the `:logger`.
@@ -429,6 +432,8 @@ module Aws::ConnectParticipant
     #   * {Types::GetTranscriptResponse#transcript #transcript} => Array<Types::Item>
     #   * {Types::GetTranscriptResponse#next_token #next_token} => String
     #
+    # The returned {Seahorse::Client::Response response} is a pageable response and is Enumerable. For details on usage see {Aws::PageableResponse PageableResponse}.
+    #
     # @example Request syntax with placeholder values
     #
     #   resp = client.get_transcript({
@@ -581,7 +586,7 @@ module Aws::ConnectParticipant
         params: params,
         config: config)
       context[:gem_name] = 'aws-sdk-connectparticipant'
-      context[:gem_version] = '1.1.0'
+      context[:gem_version] = '1.2.0'
       Seahorse::Client::Request.new(handlers, context)
     end
 

data/lib/aws-sdk-connectparticipant/resource.rb

@@ -6,13 +6,7 @@
 # WARNING ABOUT GENERATED CODE
 
 module Aws::ConnectParticipant
-  # This class provides a resource oriented interface for ConnectParticipant.
-  # To create a resource object:
-  #     resource = Aws::ConnectParticipant::Resource.new(region: 'us-west-2')
-  # You can supply a client object with custom configuration that will be used for all resource operations.
-  # If you do not pass +:client+, a default client will be constructed.
-  #     client = Aws::ConnectParticipant::Client.new(region: 'us-west-2')
-  #     resource = Aws::ConnectParticipant::Resource.new(client: client)
+
   class Resource
 
     # @param options ({})

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: aws-sdk-connectparticipant
 version: !ruby/object:Gem::Version
-  version: 1.1.0
+  version: 1.2.0
 platform: ruby
 authors:
 - Amazon Web Services
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2020-03-09 00:00:00.000000000 Z
+date: 2020-05-07 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: aws-sdk-core
@@ -81,7 +81,7 @@ required_rubygems_version: !ruby/object:Gem::Requirement
       version: '0'
 requirements: []
 rubyforge_project: 
-rubygems_version: 2.5.2.3
+rubygems_version: 2.7.6.2
 signing_key: 
 specification_version: 4
 summary: AWS SDK for Ruby - Amazon Connect Participant